Download or read book Welding Thermoplastics and Thermoplastic Composite Materials written by Ali Yousefpour and published by . This book was released on 2011-02-22 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a fully comprehensive coverage of joining thermoplastic and thermoplastic composite materials. It fills the gap in the field literature, which lacks such a reference for understanding and working with the extensive joining methods for thermoplastics and composites. The book thoroughly examines different welding methods for thermoplastic and thermoplastic composite materials. Each chapter is devoted to a specific welding method and contains corresponding welding fundamentals, welding procedure, joint design and configurations, numerical process models, evaluation methods, weld performance, characterization methods, and applications with an extensive cross-referencing for each chapter. Further, this book presents the latest progress in the field of joining thermoplastics, including practical examples from literature, patents and existing commercial products. The book helps academic and industry scientists understand how to incorporate different joining methods in their research and select the proper joining method for applications.
Download or read book Thermoplastic Aromatic Polymer Composites written by Frederic Neil Cogswell and published by Elsevier. This book was released on 2013-10-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Aromatic Polymer Composites: A Study of the Structure, Processing and Properties of Carbon Fibre Reinforced Polyetheretherketone and Related Materials deals with the field of thermoplastic composite materials through a study of carbon fiber reinforced polyetheretherketone. The book is composed of twelve chapters. The first four chapters are an introduction and basic learning of thermoplastic composite materials. These chapters include discussions on the components of thermoplastics, product forms, and the microstructure of aromatic polymer composites. The processing and manufacturing technology, including the fundamental operations, control, and the wide implications of manufacturing the composite material, are analyzed. The service performance structure of three interactions, namely, material, design, and processing, are illustrated. The strength of thermoplastic composites is then considered through an analysis of both shear and extensions with elastic modulus, but in the case of material strength, the differences between tension and compression properties should be taken into account. The book also notes that the durability, temperature sensitivity, and environmental resistance should likewise be regarded for a structural composite to have practical value and satisfactory performance. Lastly, the text explains that the numerous applications of thermoplastic structural composites, such as in medicine, aviation, marine and space technology, automotive, and industrial machinery, are all important and a rigorous evaluation is therefore necessary. The book finally suggests that the research into the future developments in the thermoplastic structural composites and the trend toward new design strategies and processing technology are important in optimizing the composite's great potential. Industrial researchers in the field of chemistry and polymer composites, students, and academicians interested in the design and application of polymer composites will find this book relevant.
Download or read book Fusion Bonding of Polymer Composites written by C. Ageorges and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion bonding is one of the three methods available for joining composite and dissimilar materials. While the other two, mechanical fastening and adhesion bonding, have been the subject of wide coverage both in textbooks and monographs, fusion bonding is covered here substantially for the first time. Fusion bonding offers a number of advantages over traditional joining techniques and it is anticipated that its use will increase dramatically in the future because of the rise in the use of thermoplastic matrix composites and the growing necessity for recyclability of engineering assemblies. Fusion Bonding of Polymer Composites provides an in-depth understanding of the physical mechanisms involved in the fusion bonding process, covering such topics as: - heat transfer in fusion bonding; - modelling thermal degradation; - consolidation mechanisms; - crystallisation kinetics; - processing-microstructure-property relationship; - full-scale fusion bonding; - fusion bonding of thermosetting composite/thermoplastic composite and metal/thermoplastic joints. The book focuses on one practical case study using the resistance welding process. This example exposes the reader to the development of processing windows for a novel manufacturing process including the use of experimental test programmes and modelling strategies.
Download or read book Thermoplastic Composites written by Haibin Ning and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-11-08 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various thermoplastic composites, including continuous and discontinuous fiber thermoplastic composites. It describes processing methods and explains the effect of different processing parameters on the structure and performance of thermoplastic composites. Characterization and mechanics of the composite are also discussed in the book.
Download or read book High Performance Thermoplastic Resins and Their Composites written by Sylvie Beland and published by William Andrew. This book was released on 2012-12-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in high performance thermoplastic resins and their composites are described in this book, and the benefits and limitations of these emerging materials are assessed for aerospace and other applications. Discussions on the performance of neat and continuous fiber reinforced thermoplastic resins in terms of their properties and environmental and chemical resistance are provided.
Download or read book Fusion Bonding of Thermoplastic Composites by Resistance Heating written by Roderic C. Don and published by . This book was released on 1989 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficiency of the welded joints is quantified by comparing test results to compression molded lap shear strength. A rapid increase in strength that asymptotically approaches the compression molded baseline is measured. In general, resistance welded APC-2 with PEEK film requires longer process times, with fiber motion occurring at the joint, to achieve a maximum lap shear strength of 44.8±7.6 MPa. The APC-2/PEI resistance welded specimens achieved a maximum strength of 35.9±1.0 Mpa in shorter time with no fiber motion. The baseline for the APC-2/PEI was determined from isothermal processing (1200 sec at 293°C) to be 43.6±3.8 MPa."
Download or read book High Performance Engineering Thermoplastic Composites written by A. Brent Strong and published by CRC Press. This book was released on 1993-03-15 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.
Download or read book Laser Welding of Plastics written by Rolf Klein and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first detailed description in English of radiation and polymeric material interaction and the influences of thermal and optical material properties. As such, it provides comprehensive information on material and process characteristics as well as applications regarding plastic laser welding. The first part of this practical book introduces the structure and physical properties of plastics, before discussing the interaction of material and radiation in the NIR and IR spectral range. This is followed by an overview of the physical foundations of laser radiation and laser sources used for plastic welding. The third part describes the main processes of laser welding thermoplastics, as well as possibilities of process control, design of joint geometry, material compatibilities and adaptation of absorption of plastics to NIR radiation. Finally, the author explains applications of laser welding plastics using several industrial case studies from the automotive industry, household goods, and medical devices. Tailored to the needs of everyone dealing with laser welding of plastics, especially engineers in packaging, component manufacturing, and the medical industry.
Download or read book Practical Induction Heat Treating Second Edition written by Richard E. Haimbaugh and published by ASM International. This book was released on 2015-08-01 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Induction Heat Treating, Second Edition is a quick reference source for induction heaters. This book ties-in the metallurgy, theory, and practice of induction heat treating from a hands-on explanation of what floor people need to know. This book includes practical tables and process analysis of induction heating.
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications
Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the relationship between structure and properties, this is a well-balanced treatment of the mechanics and the materials science of composites, while not neglecting the importance of processing. This updated second edition contains new chapters on fatigue and creep of composites, and describes in detail how the various reinforcements, the materials in which they are embedded, and of the interfaces between them, control the properties of the composite materials at both the micro- and macro-levels. Extensive use is made of micrographs and line drawings, and examples of practical applications in various fields are given throughout the book, together with extensive references to the literature. Intended for use in graduate and upper-division undergraduate courses, this book will also prove a useful reference for practising engineers and researchers in industry and academia.
Download or read book Joining of Plastics written by Jordan Rotheiser and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2015-05-07 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this comprehensive handbook emphasizes the relationship between the assembly methods, the materials, and the plastics manufacturing processes, thus enabling the reader to identify the best design/assembly method for a given application. The book has been completely updated and a new chapter on laser welding of plastics was added. All principal fastening and joining methods used to assemble plastic parts today are described with their particular advantages and disadvantages. Assembly method limitations for a given material and/or a given molding process are discussed in great detail. This is very much a "how-to" book, offering a wealth of hard-to-find detailed information. Contents: - Rapid Guidelines for Assembly of Plastics and Efficient Use of the Handbook - Designing for Efficient Assembly - Cost Reduction in Assembly - Design for Disassembly and Recycling - Assembly Method Selection by Material - Assembly Method Selection by Process - Adhesive and Solvent Joining - Fasteners and Inserts - Hinges - Hot Plates/Hot Die/Fusion and Hot Wire/Resistance Welding - Hot Gas Welding - Induction/Electromagnetic Welding - Insert and Multi-Part Welding - Press Fits/Force Fits/Interference Fits/Shrink Fits - Snap Fits - Spin Welding - Staking/Swaging/Peening/Cold Heading/Cold Forming - Threads: Tapped and Molded-In - Ultrasonic Welding - Vibration Welding - Laser Welding
Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental
Download or read book Composites for Automotive Truck and Mass Transit written by Uday Vaidya and published by DEStech Publications, Inc. This book was released on 2011 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a step-by-step introduction to nanocomposite materials using methods familiar to materials science students and engineers. It covers all nanoparticle types, including flakes, nanotubes, and nanoparticulates. It provides the basics for composites with reinforcements ranging from microns to nanometers.
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP