Download or read book Welding Thermoplastics and Thermoplastic Composite Materials written by Ali Yousefpour and published by . This book was released on 2011-02-22 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a fully comprehensive coverage of joining thermoplastic and thermoplastic composite materials. It fills the gap in the field literature, which lacks such a reference for understanding and working with the extensive joining methods for thermoplastics and composites. The book thoroughly examines different welding methods for thermoplastic and thermoplastic composite materials. Each chapter is devoted to a specific welding method and contains corresponding welding fundamentals, welding procedure, joint design and configurations, numerical process models, evaluation methods, weld performance, characterization methods, and applications with an extensive cross-referencing for each chapter. Further, this book presents the latest progress in the field of joining thermoplastics, including practical examples from literature, patents and existing commercial products. The book helps academic and industry scientists understand how to incorporate different joining methods in their research and select the proper joining method for applications.
Download or read book Thermal Welding of Polymers written by R J Wise and published by Woodhead Publishing. This book was released on 1999-10-14 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews the literature in the field of thermal welding and goes on to identify the theories for the mechanism of thermal welding of thermoplastics and to relate these, where possible, to current welding techniques and joint strength development.
Download or read book Data on the Welding of Thermoplastics written by Joint Committee on the Welding of Thermoplastics and published by . This book was released on 1966 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics and Composites Welding Handbook written by David A. Grewell and published by . This book was released on 2003 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Welding of Plastics written by Rolf Klein and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first detailed description in English of radiation and polymeric material interaction and the influences of thermal and optical material properties. As such, it provides comprehensive information on material and process characteristics as well as applications regarding plastic laser welding. The first part of this practical book introduces the structure and physical properties of plastics, before discussing the interaction of material and radiation in the NIR and IR spectral range. This is followed by an overview of the physical foundations of laser radiation and laser sources used for plastic welding. The third part describes the main processes of laser welding thermoplastics, as well as possibilities of process control, design of joint geometry, material compatibilities and adaptation of absorption of plastics to NIR radiation. Finally, the author explains applications of laser welding plastics using several industrial case studies from the automotive industry, household goods, and medical devices. Tailored to the needs of everyone dealing with laser welding of plastics, especially engineers in packaging, component manufacturing, and the medical industry.
Download or read book Thermoplastic Aromatic Polymer Composites written by Frederic Neil Cogswell and published by Elsevier. This book was released on 2013-10-22 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic Aromatic Polymer Composites: A Study of the Structure, Processing and Properties of Carbon Fibre Reinforced Polyetheretherketone and Related Materials deals with the field of thermoplastic composite materials through a study of carbon fiber reinforced polyetheretherketone. The book is composed of twelve chapters. The first four chapters are an introduction and basic learning of thermoplastic composite materials. These chapters include discussions on the components of thermoplastics, product forms, and the microstructure of aromatic polymer composites. The processing and manufacturing technology, including the fundamental operations, control, and the wide implications of manufacturing the composite material, are analyzed. The service performance structure of three interactions, namely, material, design, and processing, are illustrated. The strength of thermoplastic composites is then considered through an analysis of both shear and extensions with elastic modulus, but in the case of material strength, the differences between tension and compression properties should be taken into account. The book also notes that the durability, temperature sensitivity, and environmental resistance should likewise be regarded for a structural composite to have practical value and satisfactory performance. Lastly, the text explains that the numerous applications of thermoplastic structural composites, such as in medicine, aviation, marine and space technology, automotive, and industrial machinery, are all important and a rigorous evaluation is therefore necessary. The book finally suggests that the research into the future developments in the thermoplastic structural composites and the trend toward new design strategies and processing technology are important in optimizing the composite's great potential. Industrial researchers in the field of chemistry and polymer composites, students, and academicians interested in the design and application of polymer composites will find this book relevant.
Download or read book Data on the welding of thermoplastics Prepared by the Joint Committee on the Welding of Thermoplastics of the Institute of Welding and the British Plastics Federation With plates written by Institute of Welding (ENGLAND). Joint Committee on the Welding of Thermoplastics and published by . This book was released on 1966 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Plastics Joining written by Michael J. Troughton and published by William Andrew. This book was released on 2008-10-17 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this bestselling reference provides fully updated and detailed descriptions of plastics joining processes, plus an extensive compilation of data on joining specific materials. The volume is divided into two main parts: processes and materials. The processing section has 18 chapters, each explaining a different joining technique. The materials section has joining information for 25 generic polymer families. Both sections contain data organized according to the joining methods used for that material. A significant and extensive update from experts at The Welding Institute A systematic approach to discussing each joining method including: process, advantages and disadvantages, applications, materials, equipment, joint design, and welding parameters Includes international suppliers’ directory and glossary of key joining terms Includes new techniques such as flash free welding and friction stir welding Covers thermoplastics, thermosets, elastomers, and rubbers.
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Materials Forming Machining and Post Processing written by Kapil Gupta and published by Springer. This book was released on 2019-06-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of various forming, machining, and post processing techniques. Working principle, process mechanism, salient features and latest developments are primarily focused. It presents some basic and specialized processes to produce quality engineered parts. This book also incorporates some investigations on modelling, simulation and optimization of the aforementioned processes to improve quality and performance, productivity, and sustainability.
Download or read book Handbook of Plastics Joining written by PDL Staff and published by Cambridge University Press. This book was released on 2008-10-23 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on guide to choosing and using old and new technologies for joining plastics and elastomers. Includes detailed discussions of over 25 techniques used to join plastics to themselves and to other materials. Advantages and disadvantages of each technique along with detailed discussions of applications are presented. A second section is organized by material and provides details of using different processes with over 50 generic families of plastics and how different techniques and operating parameters affect weld strength and other criteria. This book is an excellent reference and an invaluable resource for novice and expert alike in determining the best joining technique for their application and providing guidance in how to design and prepare for production.
Download or read book Ultrasonic Welding of Thermoplastics written by Avraham Benatar and published by . This book was released on 1989 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Bonding of Polymer Composites written by C. Ageorges and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion bonding is one of the three methods available for joining composite and dissimilar materials. While the other two, mechanical fastening and adhesion bonding, have been the subject of wide coverage both in textbooks and monographs, fusion bonding is covered here substantially for the first time. Fusion bonding offers a number of advantages over traditional joining techniques and it is anticipated that its use will increase dramatically in the future because of the rise in the use of thermoplastic matrix composites and the growing necessity for recyclability of engineering assemblies. Fusion Bonding of Polymer Composites provides an in-depth understanding of the physical mechanisms involved in the fusion bonding process, covering such topics as: - heat transfer in fusion bonding; - modelling thermal degradation; - consolidation mechanisms; - crystallisation kinetics; - processing-microstructure-property relationship; - full-scale fusion bonding; - fusion bonding of thermosetting composite/thermoplastic composite and metal/thermoplastic joints. The book focuses on one practical case study using the resistance welding process. This example exposes the reader to the development of processing windows for a novel manufacturing process including the use of experimental test programmes and modelling strategies.
Download or read book High Performance Thermoplastic Resins and Their Composites written by Sylvie Beland and published by William Andrew. This book was released on 2012-12-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in high performance thermoplastic resins and their composites are described in this book, and the benefits and limitations of these emerging materials are assessed for aerospace and other applications. Discussions on the performance of neat and continuous fiber reinforced thermoplastic resins in terms of their properties and environmental and chemical resistance are provided.
Download or read book Laser Welding of Thermoplastics written by Thomas Frick and published by . This book was released on 2007 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Confluence of Multidisciplinary Sciences for Polymer Joining written by S. Arungalai Vendan and published by Springer. This book was released on 2018-12-17 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a systematic overview of polymer joining and highlights the experimental and numerical work currently being pursued to devise possible strategies to overcome the technical issues. It also covers the fundamentals of polymers, the corresponding joining processes and related technologies. A chapter on the extrapolation of finite element analysis (FEA) for forecasting the deformation and temperature distribution during polymer joining is also included. Given its breadth of coverage, the book will be of great interest to researchers, engineers and practitioners whose work involves polymers.
Download or read book Joining of Plastics written by K.W. Allen and published by iSmithers Rapra Publishing. This book was released on 1992 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report considers each of the most important thermoplastic materials in turn, and explains the characteristics which affect the choice of pre-treatment, joining method and adhesives. Thermosetting materials are considered as a single group with essentially similar properties with respect to bonding. Many practical examples are provided by some 387 references and abstracts which have been selected from the Rapra Polymer Library database to complete the report.
