Download or read book Wear Processes in Manufacturing written by Shyam Bahadur and published by ASTM International. This book was released on 1999 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at a May 1998 symposium held in Atlanta, Georgia, in sections on abrasion in ceramic grinding, wear of cutting tools, friction in vibratory conveyors, and erosion in manufacturing. Specific subjects include characterization of wear processes due to material erosion, measuri
Download or read book Tribology in Materials and Manufacturing written by Amar Patnaik and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology in Materials and Manufacturing - Wear, Friction and Lubrication brings an interdisciplinary perspective to accomplish a more detailed understanding of tribological assessments, friction, lubrication, and wear in advanced manufacturing. Chapters cover such topics as ionic liquids, non-textured and textured surfaces, green tribology, lubricants, tribolayers, and simulation of wear.
Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations
Download or read book Friction and Wear written by Giovanni Straffelini and published by Springer. This book was released on 2015-04-03 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic concepts of contact mechanics, friction, lubrication, and wear mechanisms, providing simplified analytical relationships that are useful for quantitative assessments. Subsequently, an overview on the main wear processes is provided, and guidelines on the most suitable design solutions for each specific application are outlined. The final part of the text is devoted to a description of the main materials and surface treatments specifically developed for tribological applications and to the presentation of tribological systems of particular engineering relevance. The text is up to date with the latest developments in the field of tribology and provides a theoretical framework to explain friction and wear problems, together with practical tools for their resolution. The text is intended for students on Engineering courses (both bachelor and master degrees) who must develop a sound understanding of friction, wear, lubrication, and surface engineering, and for technicians or professionals who need to solve tribological problems in their work.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1911 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology in Machine Design written by T. A. Stolarski and published by Butterworth-Heinemann. This book was released on 2000-01-11 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how algorithms developed from the basic principles of tribology can be used in a range of practical applications in mechanical devices and systems. Includes: bearings, gears, seals, clutches, brakes, tyres.
Download or read book Basics of Cutting and Abrasive Processes written by Hans Kurt Toenshoff and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing is the basic industrial activity generating real value. Cutting and abrasive technologies are the backbone of precision production in machine, automotive and aircraft building as well as of production of consumer goods. We present the knowledge of modern manufacturing in these technologies on the basis of scientific research. The theory of cutting and abrasive processes and the knowledge about their application in industrial practice are a prerequisite for the studies of manufacturing science and an important part of the curriculum of the master study in German mechanical engineering. The basis of this book is our lecture “Basics of cutting and abrasive processes” (4 semester hours/3 credit hours) at the Leibniz University Hannover, which we offer to the diploma and master students specializing in manufacturing science.
Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics
Download or read book Friction Wear Lubrication written by Kenneth C Ludema and published by CRC Press. This book was released on 2018-09-14 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this book introduces tribology in a way that builds students’ knowledge and understanding. It includes expanded information on topics such as surface characterization as well as recent advances in the field. The book provides additional descriptions of common testing methods, including diagrams and surface texturing for enhanced lubrication, and more information on rolling element bearings. It also explores surface profile characterization and elastic plastic contact mechanics including wavy surface contact, rough surface contact models, friction and wear plowing models, and thermodynamic analysis of friction.
Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.
Download or read book Design of Clothing Manufacturing Processes written by Jelka Geršak and published by Elsevier. This book was released on 2013-07-31 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of mass manufacturing of clothing and other textile products is coming to an end; what is emerging is a post-industrial production system that is able to achieve the goal of mass-customised, low volume production, where the conventional borders between product design, production and user are beginning to merge. To continue developing knowledge on how to design better products and services, we need to design better clothing manufacturing processes grounded in science, technology, and management to help the clothing industry to compete more effectively. Design of clothing manufacturing processes reviews key issues in the design of more rapid, integrated and flexible clothing manufacturing processes.The eight chapters of the book provide a detailed coverage of the design of clothing manufacturing processes using a systematic approach to planning, scheduling and control. The book starts with an overview of standardised clothing classification systems and terminologies for individual clothing types. Chapter 2 explores the development of standardised sizing systems. Chapter 3 reviews the key issues in the development of a garment collection. Chapters 4 to 7 discuss particular aspects of clothing production, ranging from planning and organization to monitoring and control. Finally, chapter 8 provides an overview of common quality requirements for clothing textile materials.Design of clothing manufacturing processes is intended for R&D managers, researchers, technologists and designers throughout the clothing industry, as well as academic researchers in the field of clothing design, engineering and other aspects of clothing production. - Considers in detail the design of sizing and classification systems - Discusses the planning required in all aspects of clothing production from design and pattern making to manufacture - Overviews the management of clothing production and material quality requirements
Download or read book Industrial Tribology written by Theo Mang and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating very interesting results from the most important R & D project ever made in Germany, this book offers a basic understanding of tribological systems and the latest developments in reduction of wear and energy consumption by tribological measures. This ready reference and handbook provides an analysis of the most important tribosystems using modern test equipment in laboratories and test fields, the latest results in material selection and wear protection by special coatings and surface engineering, as well as with lubrication and lubricants. This result is a quick introduction for mechanical engineers and laboratory technicians who have to monitor and evaluate lubricants, as well as for plant maintenance personnel, engineers and chemists in the automotive and transportation industries and in all fields of mechanical manufacturing industries, researchers in the field of mechanical engineering, chemistry and material sciences.
Download or read book Introduction to Basic Manufacturing Processes and Workshop Technology written by Rajender Singh and published by New Age International. This book was released on 2006-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The basic need is to provide theoretical and practical knowledge of manufacturing processes and workshop technology to all the engineering students. This book covers most of the syllabus of manufacturing processes/technology, workshop technology and workshop practices for engineering (diploma and degree) classes prescribed by different universities and state technical boards.
Download or read book Tribology of Abrasive Machining Processes written by Ioan D. Marinescu and published by William Andrew. This book was released on 2012-12-07 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws upon the science of tribology to understand, predict and improve abrasive machining processes. Pulling together information on how abrasives work, the authors, who are renowned experts in abrasive technology, demonstrate how tribology can be applied as a tool to improve abrasive machining processes. Each of the main elements of the abrasive machining system are looked at, and the tribological factors that control the efficiency and quality of the processes are described. Since grinding is by far the most commonly employed abrasive machining process, it is dealt with in particular detail. Solutions are posed to many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid wheel wear, vibrations, work-piece burn and high process costs. This practical approach makes this book an essential tool for practicing engineers. Uses the science of tribology to improve understanding and of abrasive machining processes in order to increase performance, productivity and surface quality of final products A comprehensive reference on how abrasives work, covering kinematics, heat transfer, thermal stresses, molecular dynamics, fluids and the tribology of lubricants Authoritative and ground-breaking in its first edition, the 2nd edition includes 30% new and updated material, including new topics such as CMP (Chemical Mechanical Polishing) and precision machining for micro-and nano-scale applications
Download or read book Tribology of Natural Fiber Polymer Composites written by and published by Elsevier. This book was released on 2008-10-14 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fiber reinforced polymer composites. These composites are fast replacing conventional materials in many applications, especially in automobiles, where tribology (friction, lubrication and wear) is important. This book covers the availability and processing of natural fiber polymer composites and their structural, thermal, mechanical and, in particular, tribological properties. Chapter 1 discusses sources of natural fibers, their extraction and surface modification. It also reviews the thermal, structural, mechanical, spectroscopic and morphological properties of unmodified and chemically modified natural fibers such as sisal, jute, wood, bamboo and cotton together with their potential applications. Chapter 2 gives a brief introduction to the tribology of polymer composites and the role of fiber reinforcement and fillers in modifying their tribological properties. Further chapters discuss the chemical composition, physical structure, mechanical properties and tribological behaviour of polymer composites reinforced with sisal, jute, cotton and bamboo fibers. The tribological behaviour of wood polymer composites (WPCs) is also discussed. Tribology of natural fibre polymer composites is a useful reference guide for engineers, scientific and technical personnel involved in the development of natural fiber composites. In particular it will give an insight into mechanical properties and failure mechanisms in situations where wear, lubrication and friction are a problem. Examines the availability and processing of natural fiber composites and their structural, thermal, mechanical and tribological properties Explores sources of natural fibers, their extraction and surface modification as well as properties of chemically modified natural fibers Provides an overview of the tribology of polymer composites and the role of fiber reinforcement and filters in modifying tribological composites
Download or read book Springer Handbook of Materials Measurement Methods written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2007-04-13 with total page 1215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook compiles advanced methods for materials measurement and characterization from the macroscopic to the nano-scale. Materials professionals need not only handbooks of materials data but clear guidelines and standards for how to measure the full spectrum of materials characteristics of new materials ans systems. Since materials science forms a bridge between the more traditonal fields of physics, engineering, and chemistry, unifying the varying perspectives and covering the full gamut of properties also serves a useful purpose. This handbook is the first dedicated to these practical and important considerations.
