Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations

Download or read book Microstructure and Wear of Materials written by K.-H. Zum Gahr and published by Elsevier. This book was released on 1987-03-01 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear.The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.

Download or read book Friction and Wear of Materials written by Ernest Rabinowicz and published by Wiley-Interscience. This book was released on 1995 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and Wear of Materials Second Edition Written by one of the world’s foremost authorities on friction, this classic book offers a lucid presentation of the theory of mechanical surface interactions as it applies to friction, wear, adhesion, and boundary lubrication. To aid engineers in design decisions, Friction and Wear of Materials evaluates the properties of materials which, under specified conditions, cause one material to function better as a bearing material than another. Featured also are thorough treatments of lubricants and the sizes and shapes of wear particles. This updated Second Edition includes new material on erosive wear, impact wear, and friction. Professor Rabinowicz’s book will be especially welcomed by mechanical and design engineers, surface scientists, tribologists and others who design, produce and operate products, machines and equipment which involve friction and its effects.

Download or read book Surface Engineering for Corrosion and Wear Resistance written by J. R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are faced with a bewildering array of choices when selecting a surface treatment for a specific corrosion or wear application. This book provides practical information to help them select the best possible treatment. An entire chapter is devoted to process comparisons, and dozens of useful tables and figures compare surface treatment thickness and hardness ranges; abrasion and corrosion resistance; processing time, temperature, and pressure; costs; distortion tendencies; and other critical process factors and coating characteristics. The chapter Practical Guidelines for Surface Engin.

Download or read book Wear written by Gwidon W. Stachowiak and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is emerging from the realm of steam engines and crank-case lubricants and becoming key to vital new technologies such as nanotechnology and MEMS. Wear is an integral part of tribology, and an effective understanding and appreciation of wear is essential in order to achieve the reliable and efficient operation of almost any machine or device. Knowledge in the field has increased considerably over recent years, and continues to expand: this book is intended to stimulate its readers to contribute towards the progress of this fascinating subject that relates to most of the known disciplines in physical science. Wear – Materials, Mechanisms and Practice provides the reader with a unique insight into our current understanding of wear, based on the contributions of numerous internationally acclaimed specialists in the field. Offers a comprehensive review of current knowledge in the field of wear. Discusses latest topics in wear mechanism classification. Includes coverage of a wide variety of materials such as metals, polymers, polymer composites, diamonds, and diamond-like films and ceramics. Discusses the chemo-mechanical linkages that control tribology, providing a more complete treatment of the subject than just the conventional mechanical treatments. Illustrated throughout with carefully compiled diagrams that provide a unique insight into the controlling mechanisms of tribology. The state of the art research on wear and the mechanisms of wear featured will be of interest to post-graduate students and lecturers in engineering, materials science and chemistry. The practical applications discussed will appeal to practitioners across virtually all sectors of engineering and industry including electronic, mechanical and electrical, quality and reliability and design.

Download or read book Impact Wear of Materials written by P.A. Engel and published by Elsevier. This book was released on 2014-04-11 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impact Wear of Materials is entirely devoted to quantitative treatment of various forms of wear occurring in impact-loaded mechanical components. Impact wear is classified under two headings, namely `erosive' and `percussive' wear. In erosive wear, particle streams and liquid jets are discussed. The subject is developed with emphasis on material relations, stress analysis and the historical progress of research. In percussive wear, a wide variety of wear mechanisms is described.The author's experimental/analytical work created the groundwork for a general procedure of impact wear-law formulation, combining impact analysis with the physical wear mechanism. Ballistic impact and pivotal hammering, compound impact, the optimal wearpath, lubrication, plasticity, and flexible media are some of the topics considered.The book develops a new conceptual approach to impact, impact-originated wear and wear in general. It describes and utilizes the modern tools of observation in wear science. In mechanical analysis it emphasizes quantitative treatment, using such tools as finite element stress analysis, APL programming language etc., each applied with classic simplicity. Numerous photographs, tables, figures and examples are used throughout the text and the mathematical treatment strives for simplicity and conceptual clarity. The book is of value to mechanical component designers, analysts and researchers. It is also useful in science and engineering curricula at senior and graduate level and, although its appeal is primarily in tribology, machine design and materials science, its interdisciplinary language makes it accessible to any branch of the physical sciences and engineering.

Download or read book Friction and Wear written by Giovanni Straffelini and published by Springer. This book was released on 2015-04-03 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic concepts of contact mechanics, friction, lubrication, and wear mechanisms, providing simplified analytical relationships that are useful for quantitative assessments. Subsequently, an overview on the main wear processes is provided, and guidelines on the most suitable design solutions for each specific application are outlined. The final part of the text is devoted to a description of the main materials and surface treatments specifically developed for tribological applications and to the presentation of tribological systems of particular engineering relevance. The text is up to date with the latest developments in the field of tribology and provides a theoretical framework to explain friction and wear problems, together with practical tools for their resolution. The text is intended for students on Engineering courses (both bachelor and master degrees) who must develop a sound understanding of friction, wear, lubrication, and surface engineering, and for technicians or professionals who need to solve tribological problems in their work.

Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.

Download or read book Fundamentals Of Tribology Third Edition written by Ramsey Gohar and published by World Scientific. This book was released on 2018-07-17 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings — journal bearings, thrust bearings and externally pressurised bearings — are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons.The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions.This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.

Download or read book Engineering Tribology written by Gwidon Stachowiak and published by Elsevier. This book was released on 2011-03-31 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering applications of tribology.This book offers an extensive range if illustrations which communicate the basic concepts of tribology in engineering better than text alone. All chapters include an extensive list of references and citations to facilitate further in-depth research and thorough navigation through particular subjects covered in each chapter. - Includes newly devised end-of-chapter problems - Provides a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid non-specialists - Gives a reader-friendly approach to the subject using a graphic illustrative method to break down the typically complex problems associated with tribology

Download or read book Wear Analysis for Engineers written by Raymond George Bayer and published by Hnb Publishing. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Tribology written by Theo Mang and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating very interesting results from the most important R & D project ever made in Germany, this book offers a basic understanding of tribological systems and the latest developments in reduction of wear and energy consumption by tribological measures. This ready reference and handbook provides an analysis of the most important tribosystems using modern test equipment in laboratories and test fields, the latest results in material selection and wear protection by special coatings and surface engineering, as well as with lubrication and lubricants. This result is a quick introduction for mechanical engineers and laboratory technicians who have to monitor and evaluate lubricants, as well as for plant maintenance personnel, engineers and chemists in the automotive and transportation industries and in all fields of mechanical manufacturing industries, researchers in the field of mechanical engineering, chemistry and material sciences.

Download or read book Surface Wear written by R. Chattopadhyay and published by ASM International. This book was released on 2001-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Describes the surface properties controlling the wear processes in different environments, and presents techniques for reducing specific type of wear through modification of surface properties. The author characterizes the energy, morphology, and composition of surfaces, then identifies the mechanisms of wear caused by adhesion, abrasion, erosion, corrosion, and heat. The main section of the book discusses the various surface protection technologies: strain hardening, thermally assisted diffusion processes, hardening by thermal treatment, thin film coatings, and thick film overlays. The final chapters address metal, plastic and ceramic composites that resist wear, and provide a wear diagnosis methodology. Annotation copyrighted by Book News Inc., Portland, OR

Download or read book The Properties of Engineering Materials written by Raymond Aurelius Higgins and published by Industrial Press Inc.. This book was released on 1994 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to materials science for engineering students at the undergraduate or advanced technical college level. This second edition includes expanded material on ceramics and composites, plus study questions. Covers crystals, mechanical properties, the deformation of materials, phase equilibrium, stress failure, methods of joining, and nond

Download or read book Tribology for Engineers written by J. Paulo Davim and published by Elsevier. This book was released on 2011-01-24 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology for engineers discusses recent research and applications of principles of friction, wear and lubrication, and provides the fundamentals and advances in tribology for modern industry. The book examines tribology with special emphasis on surface topography, wear of materials and lubrication, and includes dedicated coverage on the fundamentals of micro and nanotribology. The book serves as a valuable reference for academics, tribology and materials researchers, mechanical, physics and materials engineers and professionals in related industries with tribology. - Edited and written by highly knowledgeable and well-respected researchers in the field - Examines recent research and applications of friction, wear and lubrication - Highlights advances and future trends in the industry

Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.

Download or read book Friction and Wear of Ceramics written by Said Jahanmir and published by CRC Press. This book was released on 1993-09-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive information on the tribological aspects of advanced ceramic materials for all uses that require controlled friction and wear resistance. The text is a guide to altering the microstructure of ceramics to create optimum performance in sliding and rolling contact applications.