Download or read book WCDMA Design Handbook written by Andrew Richardson and published by Cambridge University Press. This book was released on 2005-03-17 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Wcdma Design Handbook written by Richardson and published by . This book was released on with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed out of a successful professional engineering course, this practical handbook provides a comprehensive explanation of the Wideband CDMA (Code Division Multiple Access) air interface of 3rd generation UMTS cellular systems. The book addresses all aspects of the design of the WCDMA radio interface from the lower layers to the upper layers of the protocol architecture. The book considers each of the layers in turn, to build a complete understanding of the design and operation of the WCDMA radio interface including the physical layer, RF and baseband processing, MAC, RLC, PDCP/BMP, Non-Access stratum and RRC. An ideal course book and reference for professional engineers, undergraduate and graduate students.

Download or read book WCDMA written by Rudolf Tanner and published by John Wiley & Sons. This book was released on 2005-01-28 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: WCDMA (Wideband Code Division Multiple Access), an ITU standard derived from code division multiple access (CDMA) is officially known as IMT-2000 direct spread. WCDMA is a third generation mobile wireless technology offering much higher data speeds to mobile and portable wireless devices than commonly offered in today’s market. WCDMA is a relatively new technology and there is little information in the public domain about specific design issues. The proposed book will discuss UMTS/WCDMA from the perspective of a potential development engineer, who may have experience of GSM but none of WCDMA technology. The book will outline the design specifications and potential problems and solutions faced by by an engineer designing a mobile device such as a handset. WCDMA: Requirements and Practical Design: Offers in-depth coverage of the critical issues in designing a UMTS handset modem. Discusses the practical design elements of a UMTS modem. Authored by leaders in their field, working at Ubinetics. Highly relevant to professional software engineers, Design engineers, Electrical engineers (RF base-band, DSP software, protocol software), technical managers, postgraduate students and academics.

Download or read book WCDMA UMTS Deployment Handbook written by Christophe Chevallier and published by John Wiley & Sons. This book was released on 2006-07-11 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and practical guide to WCDMA/UMTS cellular network deployment. After introducing the network architecture of such a system, the WCDMA (UMTS) Deployment Handbook defines the coverage and capacity concepts associated with the dimensioning and design phases. Progressing to a discussion of the main system parameters associated with network optimization and detailing optimization techniques for the main services supported by UMTS, and includes the specifics of indoor deployment and HSDPA networks evolution. Covers all stages from planning to optimization with sufficient details as required on a day-to-day basis, and thorough reference information for the reader who wants to understand the concepts in more detail Relevant for daily tasks: The approach taken in this book is similar to the work flow of network planner and optimization engineers, allowing such personnel to easily find the relevant information Written by the company which made CDMA a household name: QUALCOMM was the first company to use CDMA technology for cellular application and is a technical leader in this domain Based on industry feedback: All the contributors to this book have been working in direct interaction with WCDMA operators, throughout the world, since the early days of WCDMA commercial deployment Looking to the future: This book addresses the next level of challenge that WCDMA operators will face - deployment of indoor systems and HSDPA Providing a complete introduction and reference guide to everything associated with the life cycle of a WCDMA/UMTS cellular network, from initial dimensioning through to the successful deployment of indoor solutions, or migration to HSDPA, this book is a must-have for network planners and optimization engineers as well as Telecommunication Engineering students.

Download or read book WCDMA for UMTS written by Harri Holma and published by John Wiley & Sons. This book was released on 2005-01-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly regarded as the book on the air interface of 3G cellular systems WCDMA for UMTS has again been fully revised and updated. The third edition now covers the key features of 3GPP Release 6 ensuring it remains the leading principal resource in this constantly progressing area. By providing a deep understanding of the WCDMA air interface, the practical approach of this third edition will continue to appeal to operators, network and terminal manufacturers, service providers, university students and frequency regulators. Explains the key parts of the 3GPP/WCDMA standard Presents network dimensioning, coverage and capacity of WCDMA Introduces TDD and discusses its differences from FDD Key third edition updates include: Covers the main 3GPP Release 6 updates Further enhances High Speed Downlink Packet Access (HSDPA) chapter with a number of new simulation results Explains High Speed Uplink Packet Access (HSUPA) study item Introduces the new services including their performance analysis : Push-to-Talk over Cellular (PoC), streaming, See What I See (SWIS) and multiplayer games Presents a number of new WCDMA field measurement results: capacity, end-to-end performance and handovers Includes completely updated antenna beamforming and multiuser detection sections featuring new simulation results Introduces TD-SCDMA and compares it to Release TDD

Download or read book Transmission Systems Design Handbook for Wireless Networks written by Harvey Lehpamer and published by Artech House. This book was released on 2002 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical new resource gives you a comprehensive understanding of the design and deployment of transmission networks for wireless applications. From principles and design, to equipment procurement, project management, testing, and operation, it's a practical, hands-on engineering guide with numerous real-life examples of turn-key operations in the wireless networking industry. This book, written for both technical and non-technical professionals, helps you deal with the costs and difficulties involved in setting up the local access with technologies that are still in the evolutionary stage. Issues involved in the deployment of various transmission technologies, and their impact on the overall wireless network topology are discussed. Strategy and approach to transmission network planning, design and deployment are explored. The book offers practical guidelines and advice derived from the author's own experience on projects worldwide. You gain a solid grounding in third generation wireless networks with increased capacity requirements, while learning all about packet data architecture, and how it will impact future transmission network design and deployment.

Download or read book GPRS and 3G Wireless Applications written by Christoffer Andersson and published by John Wiley & Sons. This book was released on 2002-02-28 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: To ensure competitive advantage for their companies in wireless product development, developers need to understand how wireless technologies work, what impact they have on applications being developed, and how to use them to optimize products for success in the marketplace. Designed to answer these and other wireless development questions, this unique handbook explores how a host of relevant technologies work together with the new worldwide standards for wireless technologies--General Packet Radio Service (GPRS) and Third Generation (3G). Leading expert Christoffer Andersson clearly explains how GPRS and 3G control the mobile environment, then goes on to describe how the emerging radio technology of Bluetooth fits in with WAP and Java, how wireless applications work with HTTP and TCP/IP on the Internet, and how to create "always-on" wireless applications.

Download or read book Fundamentals of Network Planning and Optimisation 2G 3G 4G written by Ajay R. Mishra and published by John Wiley & Sons. This book was released on 2018-07-27 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated new edition covering all aspects of network planning and optimization This welcome new edition provides comprehensive coverage of all aspects of network planning in all the technologies, from 2G to 5G, in radio, transmission and core aspects. Written by leading experts in the field, it serves as a handbook for anyone engaged in the study, design, deployment and business of cellular networks. It increases basic understanding of the currently deployed, and emerging, technologies, and helps to make evolution plans for future networks. The book also provides an overview of the forthcoming technologies that are expected to make an impact in the future, such as 5G. Fundamentals of Cellular Network Planning and Optimization, Second Edition encompasses all the technologies as well as the planning and implementation details that go with them. It covers 2G (GSM, EGPRS), 3G (WCDMA) and 4G (LTE) networks and introduces 5G. The book also looks at all the sub-systems of the network, focusing on both the practical and theoretical issues. Provides comprehensive coverage of the planning aspects of the full range of today's mobile network systems, covering radio access network, circuit and packet switching, signaling, control, and backhaul/Core transmission networks New elements in book include HSPA, Ethernet, 4G/LTE and 5G Covers areas such as Virtualization, IoT, Artificial Intelligence, Spectrum Management and Cloud By bringing all these concepts under one cover, Fundamentals of Cellular Network Planning and Optimization becomes essential reading for network design engineers working with cellular service vendors or operators, experts/scientists working on end-to-end issues, and undergraduate/post-graduate students.

Download or read book Advanced Cellular Network Planning and Optimisation written by Ajay R. Mishra and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: A highly practical guide rooted in theory to include the necessary background for taking the reader through the planning, implementation and management stages for each type of cellular network. Present day cellular networks are a mixture of the technologies like GSM, EGPRS and WCDMA. They even contain features of the technologies that will lead us to the fourth generation networks. Designing and optimising these complex networks requires much deeper understanding. Advanced Cellular Network Planning and Optimisation presents radio, transmission and core network planning and optimisation aspects for GSM, EGPRS and WCDMA networks with focus on practical aspects of the field. Experts from each of the domains have brought their experiences under one book making it an essential read for design practitioners, experts, scientists and students working in the cellular industry. Key Highlights Focus on radio, transmission and core network planning and optimisation Covers GSM, EGPRS, WCDMA network planning & optimisation Gives an introduction to the networks/technologies beyond WCDMA, and explores its current status and future potential Examines the full range of potential scenarios and problems faced by those who design cellular networks and provides advice and solutions all backed up with real-world examples This text will serve as a handbook to anyone engaged in the design, deployment, performance and business of Cellular Networks. "Efficient planning and optimization of mobile networks are key to guarantee superior quality of service and user experience. They also form the essential foundation for the success of future technology development, making this book a valuable read on the road towards 4G." —Tero Ojanperä, Chief Technology Officer, Nokia Networks

Download or read book The Telecommunications Handbook written by Jyrki T. J. Penttinen and published by John Wiley & Sons. This book was released on 2015-01-13 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook and reference provides a complete understanding of the telecommunications field supported by descriptions and case examples throughout Taking a practical approach, The Telecommunications Handbook examines the principles and details of all of the major and modern telecommunications systems currently available to industry and to end-users. It gives essential information about usage, architectures, functioning, planning, construction, measurements and optimisation. The structure of the book is modular, giving both overall descriptions of the architectures and functionality of typical use cases, as well as deeper and practical guidelines for telecom professionals. The focus of the book is on current and future networks, and the most up-to-date functionalities of each network are described in sufficient detail for deployment purposes. The contents include an introduction to each technology, its evolution path, feasibility and utilization, solution and network architecture, and technical functioning of the systems (signalling, coding, different modes for channel delivery and security of core and radio system). The planning of the core and radio networks (system-specific field test measurement guidelines, hands-on network planning advices and suggestions for the parameter adjustments) and future systems are also described. Each chapter covers aspects individually for easy reference, including approaches such as: functional blocks, protocol layers, hardware and software, planning, optimization, use cases, challenges, solutions to potential problems Provides very practical detail on the planning and operation of networks to enable readers to apply the content in real-world deployments Bridges the gap between the communications in the academic context and the practical knowledge and skills needed to work in the telecommunications industry Section divisions include: General theory; Fixed telecommunications; Mobile communications; Space communications; Other and special communications; and Planning and management of telecommunication networks Covers new commercial and enhanced systems deployed, such as IPv6 based networks, LTE-Advanced and GALILEO An essential reference for Technical personnel at telecom operators; equipment and terminal manufacturers; Engineers working for network operators.

Download or read book Mobile Handset Design written by Sajal Kumar Das and published by John Wiley & Sons. This book was released on 2013-05-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of mobile communication standards presents numerouschallenges in mobile handset design. Designers must continue toturn out handsets that maintain high device performance and airinterface compatibility, while at the same time shrink powerconsumption, form factors, and costs. Mobile Handset Design is uniquely written to equipprofessionals and students with a complete understanding of how amobile phone works, and teaches the skills to design the latestmobile handsets. Das walks readers through mobile phone operatingprinciples, system infrastructure, TDMA-FDMA-CDMA-OFDMA techniques,hardware anatomy, software and protocols, and internal modules,components, and circuits. He presents all problems associated withmobile wireless channels and recommends corresponding designsolutions to overcome those issues. Mobile RF front-end, digitalbaseband design techniques, and associated trade-offs are alsocovered. Das also discusses the productization aspects and reviewsnew research developments for different mobile phone systems overgenerations. Teaches basic working principles of legacy and 4G mobilesystems Vividly illustrates and explains all key components and theanatomy of mobile phones Explains all hardware and software blocks, from principle topractice to product Discusses key design attributes such as low power consumptionand slim form factors Moves through all topics in a systematic fashion for easycomprehension Presentation files with lecture notes available for instructoruse This book is essential for practicing software, hardware and RFdesign engineers and product managers working to create innovate,competitive handsets. Mobile Handset Design is also idealfor fresh graduates or experienced engineers who are new to themobile industry, and is well-suited for industry veterans as ahandy reference. Lecture materials for instructors available at ahref="http://www.wiley.com/go/dasmobile"www.wiley.com/go/dasmobile/a

Download or read book Fundamentals of Cellular Network Planning and Optimisation written by Ajay R. Mishra and published by John Wiley & Sons. This book was released on 2004-05-21 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: “By 2008, some 2 billion people will be using mobile phones and devices, in many cases to access advanced data services. Against this backdrop, the need for efficient and effective network design will be critical to the success of increasingly complex mobile networks.” Simon Beresford-Wylie (SVP, Nokia Networks) With the complexity of the cellular networks increasing day by day, a deeper understanding of the design and performance of end-to-end cellular networks is required. Moreover, all the types of networks from 2G-2.5G-3G seem to co-exist. Fundamentals of Cellular Network Planning and Optimisation covers end-to-end network planning and optimisation aspects from second generation GSM to third generation WCDMA networks including GPRS and EDGE networks. All the sub-systems of the network i.e. radio network, transmission network and core network have been covered with focus on both practical and theoretical issues. By bringing all these concepts under one cover, this book becomes essential reading for the network design engineers working either with cellular service vendors or operators, experts/scientists working on end-to-end issues and undergraduate/post-graduate students. Key Highlights: Distinctly divided into four parts: 2G (GSM), 2.5G (GPRS & EDGE), 3G (WCDMA) and introduction to 4G (OFDM, ALL-IP, WLAN Overview) respectively Each part focuses on the radio, transmission and core networks. Concentrates on cellular network planning process and explains the underlying principles behind the planning and optimizing of the cellular networks. The text will serve as a handbook for anyone engaged in the study, design, deployment and business of cellular networks.

Download or read book Radio Network Planning and Optimisation for UMTS written by Jaana Laiho and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Network Planning and Optimisation for UMTS, Second Edition, is a comprehensive and fully updated introduction to WCDMA radio access technology used in UMTS, featuring new content on key developments. Written by leading experts at Nokia, the first edition quickly established itself as a best-selling and highly respected book on how to dimension, plan and optimise UMTS networks. This valuable text examines current and future radio network management issues and their impact on network performance as well as the relevant capacity and coverage enhancement methods. In addition to coverage of WCDMA radio access technology used in UMTS, and the planning and optimisation of such a system, the service control and management concept in WCDMA and GPRS networks are also introduced. This is an excellent source of information for those considering future cellular networks where Quality of Service (QoS) is of paramount importance. Key features of the Second Edition include: High-Speed Downlink Packet Access (HSDPA) – physical layer, dimensioning and radio resource management Quality of Service (QoS) mechanisms in network for service differentiation Multiple Input – Multiple Output (MIMO) technology Practical network optimisation examples Service optimisation for UMTS and GPRS/EDGE capacity optimisation The ‘hot topic’ of service control and management in WCDMA and GPRS networks, that has evolved since the first edition Companion website includes: Figures Static radio network simulator implemented in MATLAB® This text will have instant appeal to wireless operators and network and terminal manufacturers. It will also be essential reading for undergraduate and postgraduate students, frequency regulation bodies and all those interested in radio network planning and optimisation, particularly RF network systems engineering professionals.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Rene van Leuken and published by Springer. This book was released on 2011-01-16 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th International Conference on Integrated Circuit and System Design, PATMOS 2010, held in Grenoble, France, in September 2010. The 24 revised full papers presented and the 9 extended abstracts were carefully reviewed and are organized in topical sections on design flows; circuit techniques; low power circuits; self-timed circuits; process variation; high-level modeling of poweraware heterogeneous designs in SystemC-AMS; and minalogic.

Download or read book Radio Access Networks for UMTS written by Chris Johnson and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive description of Radio Access Networks for UMTS . The main content is based upon the release 6 version of the 3GPP specifications. Changes since the release 99 version are described while some of the new features from the release 7 version are introduced. Starting from the high-level network architecture, the first sections describe the flow of data between the network and end-user. This includes a dedicated chapter describing the Iub transport network. Detailed descriptions of both HSDPA and HSUPA reflect the increasing importance of efficient high data rate connections. Signalling procedures are described for speech, video and PS data connection establishment, SMS data transfer, soft handover and inter-system handover. The more practical subjects of link budgets and radio network planning are also addressed. More than 180 example log files reinforce the reader's understanding Summary bullet points allow rapid access to the most important information Focus upon how data is transferred between the network and end-user Dedicated chapters provide detailed descriptions of both HSDPA and HSUPA Step-by-step analysis of common signalling procedures Key radio network planning subjects addressed Radio Access Networks for UMTS is ideal for mobile telecommunications engineers working for equipment vendors, operators and regulators. It will also appeal to system designers, technical managers and students.

Download or read book LTE The UMTS Long Term Evolution written by Stefania Sesia and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Where this book is exceptional is that the reader will not just learn how LTE works but why it works" Adrian Scrase, ETSI Vice-President, International Partnership Projects Following on the success of the first edition, this book is fully updated, covering the latest additions to LTE and the key features of LTE-Advanced. This book builds on the success of its predecessor, offering the same comprehensive system-level understanding built on explanations of the underlying theory, now expanded to include complete coverage of Release 9 and the developing specifications for LTE-Advanced. The book is a collaborative effort of more than 40 key experts representing over 20 companies actively participating in the development of LTE, as well as academia. The book highlights practical implications, illustrates the expected performance, and draws comparisons with the well-known WCDMA/HSPA standards. The authors not only pay special attention to the physical layer, giving an insight into the fundamental concepts of OFDMA-FDMA and MIMO, but also cover the higher protocol layers and system architecture to enable the reader to gain an overall understanding of the system. Key New Features: Comprehensively updated with the latest changes of the LTE Release 8 specifications, including improved coverage of Radio Resource Management RF aspects and performance requirements Provides detailed coverage of the new LTE Release 9 features, including: eMBMS, dual-layer beamforming, user equipment positioning, home eNodeBs / femtocells and pico cells and self-optimizing networks Evaluates the LTE system performance Introduces LTE-Advanced, explaining its context and motivation, as well as the key new features including: carrier aggregation, relaying, high-order MIMO, and Cooperative Multi-Point transmission (CoMP). Includes an accompanying website containing a complete list of acronyms related to LTE and LTE-Advanced, with a brief description of each (http://www.wiley.com/go/sesia_theumts) This book is an invaluable reference for all research and development engineers involved in implementation of LTE or LTE-Advanced, as well as graduate and PhD students in wireless communications. Network operators, service providers and R&D managers will also find this book insightful.

Download or read book Linear Circuit Design Handbook written by Analog Devices Inc. Analog Devices Inc. Engineeri and published by Newnes. This book was released on 2011-08-30 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables design engineers to be more effective in designing discrete and integrated circuits by helping them understand the role of analog devices in their circuit design. Analog elements are at the heart of many important functions in both discrete and integrated circuits, but from a design perspective the analog components are often the most difficult to understand. Examples include operational amplifiers, D/A and A/D converters and active filters. Effective circuit design requires a strong understanding of the operation of these analog devices and how they affect circuit design. Comprehensive coverage of analog circuit components for the practicing engineerMarket-validated design information for all major types of linear circuitsIncludes practical advice on how to read op amp data sheets and how to choose off-the-shelf op ampsFull chapter covering printed circuit board design issues