Download or read book Wavelets Their Friends and what They Can Do for You written by Martin J. Mohlenkamp and published by European Mathematical Society. This book was released on 2008 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: These notes introduce the central concepts surrounding wavelets and their applications. By focusing on the essential ideas and arguments, the authors enable readers to get to the heart of the matter as quickly as possible. A list of references guides readers interested in further study to the appropriate places in the literature for detailed proofs and real applications. The authors begin with the notion of time-frequency analysis, present the multiresolution analysis and basic wavelet construction, introduce the many friends, relatives, and mutations of wavelets, and finally give a selection of applications. This book is suitable for beginning graduate students and above. A preliminary chapter containing some of the prerequisite concepts and definitions is included for reference.
Download or read book A Math Primer for Engineers written by C.W. Cryer and published by IOS Press. This book was released on 2014-03-04 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics and engineering are inevitably interrelated, and this interaction will steadily increase as the use of mathematical modelling grows. Although mathematicians and engineers often misunderstand one another, their basic approach is quite similar, as is the historical development of their respective disciplines. The purpose of this Math Primer is to provide a brief introduction to those parts of mathematics which are, or could be, useful in engineering, especially bioengineering. The aim is to summarize the ideas covered in each subject area without going into exhaustive detail. Formulas and equations have not been avoided, but every effort has been made to keep them simple in the hope of persuading readers that they are not only useful but also accessible. The wide range of topics covered includes introductory material such as numbers and sequences, geometry in two and three dimensions, linear algebra, and the calculus. Building on these foundations, linear spaces, tensor analysis and Fourier analysis are introduced. All these concepts are used to solve problems for ordinary and partial differential equations. Illustrative applications are taken from a variety of engineering disciplines, and the choice of a suitable model is considered from the point of view of both the mathematician and the engineer. This book will be of interest to engineers and bioengineers looking for the mathematical means to help further their work, and it will offer readers a glimpse of many ideas which may spark their interest.
Download or read book Cochlear Implant Research Updates written by Cila Umat and published by BoD – Books on Demand. This book was released on 2012-04-27 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years or decades, cochlear implants have been an exciting research area covering multiple disciplines which include surgery, engineering, audiology, speech language pathology, education and psychology, among others. Through these research studies, we have started to learn or have better understanding on various aspects of cochlear implant surgery and what follows after the surgery, the implant technology and other related aspects of cochlear implantation. Some are much better than the others but nevertheless, many are yet to be learnt. This book is intended to fill up some gaps in cochlear implant research studies. The compilation of the studies cover a fairly wide range of topics including surgical issues, some basic auditory research, and work to improve the speech or sound processing strategies, some ethical issues in language development and cochlear implantation in cases with auditory neuropathy spectrum disorder. The book is meant for postgraduate students, researchers and clinicians in the field to get some updates in their respective areas.
Download or read book Harmonic Analysis written by María Cristina Pereyra and published by American Mathematical Soc.. This book was released on 2012 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conveys the remarkable beauty and applicability of the ideas that have grown from Fourier theory. It presents for an advanced undergraduate and beginning graduate student audience the basics of harmonic analysis, from Fourier's study of the heat equation, and the decomposition of functions into sums of cosines and sines (frequency analysis), to dyadic harmonic analysis, and the decomposition of functions into a Haar basis (time localization).
Download or read book Iris Runge written by Renate Tobies and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concerns the origins of mathematical problem solving at the internationally active Osram and Telefunken Corporations during the golden years of broadcasting and electron tube research. The woman scientist Iris Runge, who received an interdisciplinary education at the University of Göttingen, was long employed as the sole mathematical authority at these companies in Berlin. It will be shown how mathematical connections were made between statistics and quality control, and between physical-chemical models and the actual problems of mass production. The organization of industrial laboratories, the relationship between theoretical and experimental work, and the role of mathematicians in these settings will also be explained. By investigating the social, economic, and political conditions that unfolded from the time of the German Empire until the end of the Second World War, the book hopes to build a bridge between specialized fields – mathematics and engineering – and the general culture of a particular era. It hopes, furthermore, to build a bridge between the history of science and industry, on the one hand, and the fields of Gender and Women’s Studies on the other. Finally, by examining the life and work of numerous industrial researchers, insight will be offered into the conditions that enabled a woman to achieve a prominent professional position during a time when women were typically excluded from the scientific workforce.
Download or read book Faber Systems and Their Use in Sampling Discrepancy Numerical Integration written by Hans Triebel and published by European Mathematical Society. This book was released on 2012 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals first with Haar bases, Faber bases and Faber frames for weighted function spaces on the real line and the plane. It extends results in the author's book, ``Bases in Function Spaces, Sampling, Discrepancy, Numerical Integration'' (EMS, 2010), from unweighted spaces (preferably in cubes) to weighted spaces. The obtained assertions are used to study sampling and numerical integration in weighted spaces on the real line and weighted spaces with dominating mixed smoothness in the plane. A short chapter deals with the discrepancy for spaces on intervals.
Download or read book Linear Systems written by Gordon Blower and published by Springer Nature. This book was released on 2023-01-10 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a mathematical introduction to linear systems, with a focus on the continuous-time models that arise in engineering applications such as electrical circuits and signal processing. The book introduces linear systems via block diagrams and the theory of the Laplace transform, using basic complex analysis. The book mainly covers linear systems with finite-dimensional state spaces. Graphical methods such as Nyquist plots and Bode plots are presented alongside computational tools such as MATLAB. Multiple-input multiple-output (MIMO) systems, which arise in modern telecommunication devices, are discussed in detail. The book also introduces orthogonal polynomials with important examples in signal processing and wireless communication, such as Telatar’s model for multiple antenna transmission. One of the later chapters introduces infinite-dimensional Hilbert space as a state space, with the canonical model of a linear system. The final chapter covers modern applications to signal processing, Whittaker’s sampling theorem for band-limited functions, and Shannon’s wavelet. Based on courses given for many years to upper undergraduate mathematics students, the book provides a systematic, mathematical account of linear systems theory, and as such will also be useful for students and researchers in engineering. The prerequisites are basic linear algebra and complex analysis.
Download or read book Splitting Methods for Partial Differential Equations with Rough Solutions written by Helge Holden and published by European Mathematical Society. This book was released on 2010 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operator splitting (or the fractional steps method) is a very common tool to analyze nonlinear partial differential equations both numerically and analytically. By applying operator splitting to a complicated model one can often split it into simpler problems that can be analyzed separately. In this book one studies operator splitting for a family of nonlinear evolution equations, including hyperbolic conservation laws and degenerate convection-diffusion equations. Common for these equations is the prevalence of rough, or non-smooth, solutions, e.g., shocks. Rigorous analysis is presented, showing that both semi-discrete and fully discrete splitting methods converge. For conservation laws, sharp error estimates are provided and for convection-diffusion equations one discusses a priori and a posteriori correction of entropy errors introduced by the splitting. Numerical methods include finite difference and finite volume methods as well as front tracking. The theory is illustrated by numerous examples. There is a dedicated Web page that provides MATLABR codes for many of the examples. The book is suitable for graduate students and researchers in pure and applied mathematics, physics, and engineering.
Download or read book Lectures on Duflo Isomorphisms in Lie Algebra and Complex Geometry written by Damien Calaque and published by European Mathematical Society. This book was released on 2011 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Duflo isomorphism first appeared in Lie theory and representation theory. It is an isomorphism between invariant polynomials of a Lie algebra and the center of its universal enveloping algebra, generalizing the pioneering work of Harish-Chandra on semi-simple Lie algebras. Kontsevich later refined Duflo's result in the framework of deformation quantization and also observed that there is a similar isomorphism between Dolbeault cohomology of holomorphic polyvector fields on a complex manifold and its Hochschild cohomology. This book, which arose from a series of lectures by Damien Calaque at ETH, derives these two isomorphisms from a Duflo-type result for $Q$-manifolds. All notions mentioned above are introduced and explained in this book. The only prerequisites are basic linear algebra and differential geometry. In addition to standard notions such as Lie (super) algebras, complex manifolds, Hochschild and Chevalley-Eilenberg cohomologies, spectral sequences, Atiyah and Todd classes, the graphical calculus introduced by Kontsevich in his seminal work on deformation quantization is addressed in detail. This book is well suited for graduate students in mathematics and mathematical physics as well as researchers working in Lie theory, algebraic geometry, and deformation theory.
Download or read book A Course on Elation Quadrangles written by Koen Thas and published by European Mathematical Society. This book was released on 2012 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The notion of elation generalized quadrangle is a natural generalization to the theory of generalized quadrangles of the important notion of translation planes in the theory of projective planes. Almost any known class of finite generalized quadrangles can be constructed from a suitable class of elation quadrangles. In this book the author considers several aspects of the theory of elation generalized quadrangles. Special attention is given to local Moufang conditions on the foundational level, exploring, for instance, Knarr's question from the 1990s concerning the very notion of elation quadrangles. All the known results on Kantor's prime power conjecture for finite elation quadrangles are gathered, some of them published here for the first time. The structural theory of elation quadrangles and their groups is heavily emphasized. Other related topics, such as $p$-modular cohomology, Heisenberg groups, and existence problems for certain translation nets, are briefly touched. This book starts from scratch and is essentially self-contained. Many alternative proofs are given for known theorems. This course contains dozens of exercises at various levels, from very easy to rather difficult, and will stimulate undergraduate and graduate students to enter the fascinating and rich world of elation quadrangles. More accomplished mathematicians will find the final chapters especially challenging.
Download or read book Lectures on Gaussian Integral Operators and Classical Groups written by Yu. A. Neretin and published by European Mathematical Society. This book was released on 2011 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an elementary self-contained introduction to some constructions of representation theory and related topics of differential geometry and analysis. Topics covered include the theory of various Fourier-like integral operators such as Segal-Bargmann transforms, Gaussian integral operators in $L^2$ and in the Fock space, integral operators with theta-kernels, the geometry of real and $p$-adic classical groups and symmetric spaces. The heart of the book is the Weil representation of the symplectic group (real and complex realizations, relations with theta-functions and modular forms, $p$-adic and adelic constructions) and representations in Hilbert spaces of holomorphic functions of several complex variables. This book is addressed to graduate students and researchers in representation theory, differential geometry, and operator theory. Prerequisites are standard university courses in linear algebra, functional analysis, and complex analysis.
Download or read book Moonshine of Finite Groups written by Koichiro Harada and published by European Mathematical Society. This book was released on 2010 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an almost verbatim reproduction of the author's lecture notes written in 1983-84 at Ohio State University, Columbus. A substantial update is given in the bibliography. Over the last 20 plus years there has been energetic activity in the field of finite simple group theory related to the monster simple group. Most notably, influential works have been produced in the theory of vertex operator algebras from research that was stimulated by the moonshine of the finite groups. Still, we can ask the same questions now that we did 30-40 years ago: What is the monster simple group? Is it really related to the theory of the universe as it was vaguely so envisioned? What lies behind the moonshine phenomena of the monster group? It may appear that we have only scratched the surface. These notes are primarily reproduced for the benefit of readers who wish to start learning about modular functions used in moonshine.
Download or read book Mathematical Foundations of Supersymmetry written by Claudio Carmeli and published by European Mathematical Society. This book was released on 2011 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supersymmetry is a highly active area of considerable interest among physicists and mathematicians. It is not only fascinating in its own right, but there is also indication that it plays a fundamental role in the physics of elementary particles and gravitation. The purpose of the book is to lay down the foundations of the subject, providing the reader with a comprehensive introduction to the language and techniques, as well as detailed proofs and many clarifying examples. This book is aimed ideally at second-year graduate students. After the first three introductory chapters, the text is divided into two parts: the theory of smooth supermanifolds and Lie supergroups, including the Frobenius theorem, and the theory of algebraic superschemes and supergroups. There are three appendices. The first introduces Lie superalgebras and representations of classical Lie superalgebras, the second collects some relevant facts on categories, sheafification of functors and commutative algebra, and the third explains the notion of Frechet space in the super context.
Download or read book Basic Noncommutative Geometry written by Masoud Khalkhali and published by European Mathematical Society. This book was released on 2009 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Basic Noncommutative Geometry provides an introduction to noncommutative geometry and some of its applications. The book can be used either as a textbook for a graduate course on the subject or for self-study. It will be useful for graduate students and researchers in mathematics and theoretical physics and all those who are interested in gaining an understanding of the subject. One feature of this book is the wealth of examples and exercises that help the reader to navigate through the subject. While background material is provided in the text and in several appendices, some familiarity with basic notions of functional analysis, algebraic topology, differential geometry and homological algebra at a first year graduate level is helpful. Developed by Alain Connes since the late 1970s, noncommutative geometry has found many applications to long-standing conjectures in topology and geometry and has recently made headways in theoretical physics and number theory. The book starts with a detailed description of some of the most pertinent algebra-geometry correspondences by casting geometric notions in algebraic terms, then proceeds in the second chapter to the idea of a noncommutative space and how it is constructed. The last two chapters deal with homological tools: cyclic cohomology and Connes-Chern characters in K-theory and K-homology, culminating in one commutative diagram expressing the equality of topological and analytic index in a noncommutative setting. Applications to integrality of noncommutative topological invariants are given as well."--Publisher's description.
Download or read book Finite Generalized Quadrangles written by Stanley E. Payne and published by European Mathematical Society. This book was released on 2009 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generalized quadrangles (GQ) were formally introduced by J. Tits in 1959 to describe geometric properties of simple groups of Lie type of rank 2. The first edition of Finite Generalized Quadrangles (FGQ) quickly became the standard reference for finite GQ. The second edition is essentially a reprint of the first edition. It is a careful rendering into LaTeX of the original, along with an appendix that brings to the attention of the reader those major new results pertaining to GQ, especially in those areas where the authors of this work have made a contribution. The first edition has been out of print for many years. The new edition makes available again this classical reference in the rapidly increasing field of finite geometries.
Download or read book Least Squares Data Fitting with Applications written by Per Christian Hansen and published by JHU Press. This book was released on 2013-01-15 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Included are; an overview of computational methods together with their properties and advantages; topics from statistical regression analysis that help readers to understand and evaluate the computed solutions; many examples that illustrate the techniques and algorithmsLeast Squares Data Fitting with Applications can be used as a textbook for advanced undergraduate or graduate courses and professionals in the sciences and in engineering.
Download or read book Revista Mexicana de Astronom a Y Astrof sica written by and published by . This book was released on 2013 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
