Download or read book Wastewater Treatment Plants written by Syed R. Qasim and published by Routledge. This book was released on 2017-11-22 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.

Download or read book Operation of Wastewater Treatment Plants written by and published by . This book was released on 2004 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.

Download or read book Sludge Reduction Technologies in Wastewater Treatment Plants written by Paola Foladori and published by IWA Publishing. This book was released on 2010-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Reduction Technologies in Wastewater Treatment Plants is a review of the sludge reduction techniques integrated in wastewater treatment plants with detailed chapters on the most promising and most widespread techniques. The aim of the book is to update the international community on the current status of knowledge and techniques in the field of sludge reduction. It will provide a comprehensive understanding of the following issues in sludge reduction: principles of sludge reduction techniques; process configurations; potential performance; advantages and drawbacks; economics and energy consumption. This book will be essential reading for managers and technical staff of wastewater treatment plants as well as graduate students and post-graduate specialists.

Download or read book Operation of Wastewater Treatment Plants written by Water Pollution Control Federation. Subcommittee on Operation of Wastewater Treatment Plants and published by . This book was released on 1970 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Upgrading Water Treatment Plants written by Renato Pinheiro and published by CRC Press. This book was released on 2001-05-31 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Upgrading Water Treatment Plants is a comprehensive and practical guide providing the technical detail required to upgrade existing water treatment plants to increase processing efficiency and improve overall quality without the need for substantial investment into new physical plant installation. Based on practical experience and field tested methodology, this book is an invaluable reference for civil engineers, treatment plant managers and water scientists in consultancies, water utilities, government agencies and international organisations concerned with public health and water quality.

Download or read book Integrated Design and Operation of Water Treatment Facilities written by Susumu Kawamura and published by John Wiley & Sons. This book was released on 2000-09-14 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely up-to-date coverage of water treatment facility design and operation This Second Edition of Susumu Kawamura's landmark volume offerscomprehensive coverage of water treatment facility design, from thebasic principles to the latest innovations. It covers a broadspectrum of water treatment process designs in detail and offersclear guidelines on how to choose the unit, process, and equipmentthat will maximize overall efficiency and minimize maintenancecosts. This book also explores many important operational issuesthat affect today's plant operators and facility designers. This new edition introduces several new subjects, including valueengineering, watershed management, dissolved air flotation process,filtered reservoir (clearwell) design, and electrical systemdesign. It provides expanded and updated coverage of objectives forfinished water quality, instrumentation and control, disinfectionprocess, ozonation, disinfection by-product control, the GACprocess, and the membrane filtration process. Other importantfeatures of this Second Edition include: * Practical guidance on the design of every water treatment plantcomponent * New information on plant layout, cost estimation, sedimentationissues, and more * English and SI units throughout * Help in designing for compliance with water treatment-relatedgovernment regulations Supplemented with hundreds of illustrations, charts, and tables,Integrated Design and Operation of Water Treatment Facilities,Second Edition is an indispensable, hands-on resource for civilengineers and managers, whether working on new facilities orredesigning and rebuilding existing facilities.

Download or read book A B processes Towards Energy Self sufficient Municipal Wastewater Treatment written by Yu Liu and published by IWA Publishing. This book was released on 2019-11-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principle of the conventional activated sludge (CAS) for municipal wastewater treatment is primarily based on biological oxidation by which organic matters are converted to biomass and carbon dioxide. After more than 100 years’ successful application, the CAS process is receiving increasing critiques on its high energy consumption and excessive sludge generation. Currently, almost all municipal wastewater treatment plants with the CAS as a core process are being operated in an energy-negative fashion. To tackle such challenging situations, there is a need to re-examine the present wastewater treatment philosophy by developing and adopting novel process configurations and emerging technologies. The solutions going forward should rely on the ways to improve direct energy recovery from wastewater, while minimizing in-plant energy consumption. This book begins with a critical overview of the energy situation and challenges in current municipal wastewater treatment plants, showing the necessity of the paradigm shift from removal to recovery in terms of energy and resource. As such, the concept of A-B process is discussed in detail in the book. It appears that various A-B process configurations are able to provide possible engineering solutions in which A-stage is primarily designed for COD capture with the aim for direct anaerobic treatment without producing excessive biosludge, while B-stage is designated for nitrogen removal. Making the wastewater treatment energy self-sustainable is obviously of global significance and eventually may become a game changer for the global market of the municipal wastewater reclamation technology. The principal audiences include practitioners, professionals, university researchers, undergraduate and postgraduate students who are interested and specialized in municipal wastewater treatment and process design, environmental engineering, and environmental biotechnology.

Download or read book Benchmarking of Control Strategies for Wastewater Treatment Plants written by Krist V. Gernaey and published by IWA Publishing. This book was released on 2014-09-15 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada

Download or read book An Applied Guide to Water and Effluent Treatment Plant Design written by Sean Moran and published by Butterworth-Heinemann. This book was released on 2018-06-01 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Applied Guide to Water and Effluent Treatment Plant Design is ideal for chemical, civil and environmental engineering students, graduates, and early career water engineers as well as more experienced practitioners who are transferring into the water sector. It brings together the design of process, wastewater, clean water, industrial effluent and sludge treatment plants, looking at the different treatment objectives within each sub-sector, selection and design of physical, chemical and biological treatment processes, and the professional hydraulic design methodologies. This book will show you how to carry out the key steps in the process design of all kinds of water and effluent treatment plants. It provides an essential refresher on the relevant underlying principles of engineering science, fluid mechanics, water chemistry and biology, together with a thorough description of the heuristics and rules of thumb commonly used by experienced practitioners. The water treatment plant designer will also find specific advice on plant layout, aesthetics, economic considerations and related issues such as odor control. The information contained in this book is usually provided on the job by mentors so it will remain a vital resource throughout your career. - Explains how to design water and effluent treatment plants that really work - Accessible introduction to, and overview of, the area that is written from a process engineering perspective - Covers new treatment technologies and the whole process, from treatment plant design, to commissioning

Download or read book Handbook of Water and Wastewater Treatment Technologies written by Nicholas P Cheremisinoff and published by Butterworth-Heinemann. This book was released on 2002 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Overview of Water and Wastewater; What Filtration Is All About; Chemical Additives that Enhance Filtration; Selecting the Right Filter Media; What Pressure- and Cake-Filtration Are All; Cartridge and Other Filters Worth Mentioning; What Sand Filtration is All About; Sedimentation, Clarification, Flotation, and Membrane Separation Technologies; Ion Exchange and Carbon Adsorption; Water Sterilization Technologies; Treating the Sludge; Glossary; Index.

Download or read book Water Treatment Plant Design written by American Society of Civil Engineers and published by McGraw-Hill Professional Publishing. This book was released on 2005 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industry standard reference for water treatment plant design and modernization has been updated to include hot topics such as security and design, vulnerability assessments, and planning against vandalism and sabotage, as well as the latest information on codes, regulations, and water quality standards. * Latest code updates and new water quality standards * Design operation and analysis of treatment facilities

Download or read book Handbook of Water and Wastewater Treatment Plant Operations written by Frank R. Spellman and published by CRC Press. This book was released on 2020-05-17 with total page 1113 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Water and Wastewater Treatment Plant Operations is the first thorough resource manual developed exclusively for water and wastewater plant operators. Now regarded as an industry standard, this fourth edition has been updated throughout, and explains the material in easy-to-understand language. It also provides real-world case studies and operating scenarios, as well as problem-solving practice sets for each scenario. Features: Updates the material to reflect the developments in the field Includes new math operations with solutions, as well as over 250 new sample questions Adds updated coverage of energy conservation measures with applicable case studies Enables users to properly operate water and wastewater plants and suggests troubleshooting procedures for returning a plant to optimum operation levels Prepares operators for licensure exams A complete compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends, this text serves as a resource for professionals working in water and wastewater operations and operators preparing for wastewater licensure exams. It can also be used as a supplemental textbook for undergraduate and graduate students studying environmental science, water science, and environmental engineering.

Download or read book Simplified Wastewater Treatment Plant Operations Workbook written by Edward Haller and published by CRC Press. This book was released on 1995-03-30 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a simple, straightforward manner, this book presents most of the major process units for wastewater treatment, addressing what the unit is and how it basically works. Along with that it provides some of the math problems associated with each unit. Each math problem, presented in English units, is usually followed by a nearly identical problem in metric units. It also presents new concepts, such as information on process microbiology, in a comfortable language so the reader can concentrate on the subject matter instead of the language used to present it. Simplified Wastewater Treatment Plant Operations provides comprehensive and technically accurate wastewater information in a clear and concise manner. The related workbook provides readers with a place to write in answers and work out problem solutions.

Download or read book Advances in Water and Wastewater Treatment written by Rao Y. Surampalli and published by ASCE Publications. This book was released on 2004-01-01 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation "Advances in Water and Wastewater Treatment provides state-of-the-art information on the application of innovative technologies for water and wastewater treatment with an emphasis on the scientific principles for pollutant or pathogen removal. Described in detail are the practice and principles of wastewater treatment on topics such as: global warming, sustainable development, nutrient removal, bioplastics production, biosolid digestion and composting, pathogen reduction, metal leaching, secondary clarifiers, surface and subsurface constructed wetland, and wastewater reclamation. Environmental engineers and scientists involved in the practice of environmental engineering will benefit from the basic principles to innovation technologies application."--BOOK JACKET. Title Summary field provided by Blackwell North America, Inc. All Rights Reserved.

Download or read book Instrumentation Handbook for Water and Wastewater Treatment Plants written by Robert G. Skrentner and published by CRC Press. This book was released on 1988-05-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Answers to what makes an instrument reliable and maintainable frequently lie outside the manufacturers' manuals. These sometimes are revised procedures, test methods, or physical modifications. This book provides complete information for 26 widely used instruments including pumps and valves used in process control. This includes application, principle of operation, accuracy and repeatability, manufacture's options, installation, designer checklist, maintenance and calibration, deficiencies, and references. It is a guide to for the selection, application, and maintenance of primary elements and final control elements.

Download or read book Operation of Municipal Wastewater Treatment Plants Management and support systems written by Water Environment Federation and published by Water Environment Federation. This book was released on 2008-01-01 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Long-established as an essential reference of the water quality industry, Operation of Municipal Wastewater Treatment Plants, MOP 11 is now available in a revised and expanded Sixth edition. The first major revision in 11 years, this updated classic offers you a complete guide to the operation and maintenance of municipal wastewater treatment plants."--BOOK JACKET.