Download or read book Water Sensitivity of Asphalt aggregate Mixes written by Ronald L. Terrel and published by National Research Council. This book was released on 1994 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research presented in this report was conducted to identify the important factors influencing the water sensitivity of asphalt paving mixtures, and to develop a test method to evaluate water sensitivity of asphalt concrete mixtures for mix design. The test method was to be performance related. A review of current procedures revealed that no single method was suitable for evaluation and related to field performance. Based on a hypothesis that air voids in the mixture may be the major source and cause of water damage, a test system was developed to evaluate the major factors that influence water sensitivity. The Environmental Conditioning System (ECS) was used to develop a test procedure that includes specimen preparation; measurement of permeability using air, water, or both; vacuum wetting; cycling at various temperatures; and continuous repeated loading while monitoring resilient modulus after each conditioning cycle.
Download or read book Water Sensitivity written by Todd V. Scholz and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Strategic Highway Research Program study was undertaken to evaluate the hypotheses concerning the influence of binder properties on the moisture susceptibility of asphalt-aggregate mixes. Thirty-two mixes using eight asphalts and four aggregates from the Materials Reference Library were used to fabricate roller-compacted slabs from which specimens were sawed or cored. The mixes were tested by four procedures. Because the water-conditioning and testing procedures were different, it was not appropriate to make direct comparisons of results or to use the results for ranking materials. It was concluded that, for water-sensitivity, asphalts or aggregates could not be ranked alone but that combinations or pairs were more appropriate because of strong interactions.
Download or read book Aggregate Properties and the Performance of Superpave designed Hot Mix Asphalt written by Brian D. Prowell and published by Transportation Research Board. This book was released on 2005 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot mix Asphalt Mixtures written by and published by . This book was released on 1999 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Accelerated Performance related Tests for Asphalt aggregate Mixes and Their Use in Mix Design and Analysis Systems written by University of California, Berkeley and published by National Research Council. This book was released on 1994 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides a brief summary of the processes that led to the selection of performance-related tests to define asphalt-aggregate interactions that result in fatigue, permanent deformation, thermal cracking, aging, and water sensitivity. Inherent in this test selection process was the emphasis on the ability of the tests to measure fundamental material properties that, when incorporated into prediction models, will depend less on empirical correlations than has been traditionally the case. Also included are the results of validation studies for each of the tests and frameworks for the use of the tests in mix design and analysis. Several levels of design are provided for each distress, some of which incorporate reliability concepts.
Download or read book Stage 1 Validation of the Relationship Between Asphalt Properties and Asphalt aggregate Mix Performance written by and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: A primary objective for the Strategic Highway Research Program (SHRP) A-003A contract was to extend and verify the results obtained by other SHRP contractors on the performance-related characteristics of asphalt binders in paving mixes. This report specifically addresses validation of the following: 1) binder properties proposed by the A-002A contractor to predict asphalt-aggregate mix performance in terms of fatigue, permanent deformation, and thermal cracking; and 2) conditioning procedures that produce binder properties representative of those in a pavement immediately after construction and after several years of service. While water sensitivity requirements are not included in the binder specification, validation efforts in the water-sensitivity area are also described. Materials used in the investigation included 8 to 16 asphalt binders and 2 to 4 aggregates obtained from the SHRP Materials Reference Library.
Download or read book Asphalt Concrete Mix Design written by William Gartner and published by ASTM International. This book was released on 1989 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Asphalt Concrete written by Carl L. Monismith and published by DIANE Publishing. This book was released on 1998-07 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes research results concerned with the behavior of asphalt-aggregate mixes for pavements. An objective of this project was the development of a series of accelerated performance tests for asphalt-aggregate mixes together with methods for analyzing asphalt-aggregate interactions which significantly affect performance. Methodologies to define the fatigue, permanent deformation, thermal cracking, water sensitivity, and aging characteristics are described and use of these procedures in mix design/analysis stems which permit performance predictions under a variety of environmental and traffic loading conditions is illustrated.
Download or read book Modeling and Design of Flexible Pavements and Materials written by Dallas N. Little and published by Springer. This book was released on 2017-09-25 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook lays out the state of the art for modeling of asphalt concrete as the major structural component of flexible pavements. The text adopts a pedagogy in which a scientific approach, based on materials science and continuum mechanics, predicts the performance of any configuration of flexible roadways subjected to cyclic loadings. The authors incorporate state-of the-art computational mechanics to predict the evolution of material properties, stresses and strains, and roadway deterioration. Designed specifically for both students and practitioners, the book presents fundamentally complex concepts in a clear and concise way that aids the roadway design community to assimilate the tools for designing sustainable roadways using both traditional and innovative technologies.
Download or read book Evaluation of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment written by Sunghwan Kim and published by . This book was released on 2005 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even though moisture sensitivity of Hot Mix Asphalt (HMA) mixtures has been recognized as a major form of distress in asphalt concrete pavements since the advent of asphalt paving technology, the mechanism of this problem has not been clearly identified until now. However, it has been agreed that it can be characterized by the loss of adhesive bond between the asphalt binder and the aggregate or by a softening of the cohesive bonds within the asphalt binder, both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of Hot Mix Asphalt moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was conducted to develop a new test protocol which can overcome the problems of the current procedures and to evaluate the possibility of using the Nottingham Asphalt Tester (NAT) in the resulting procedure.
Download or read book Focus written by and published by . This book was released on 1989 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems written by Manfred N. Partl and published by Springer. This book was released on 2018-02-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.
Download or read book Improved Conditioning and Testing Procedures for HMA Moisture Susceptibility written by Mansour Solaimanian and published by Transportation Research Board. This book was released on 2007 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores whether combining the environmental conditioning system with the simple performance test would provide a superior procedure for determining the moisture susceptibility of hot-mix asphalt (HMA).
Download or read book 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials written by Francesco Canestrari and published by Springer. This book was released on 2015-09-24 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
Download or read book Bituminous Mixtures and Pavements VI written by A. Nikolaides and published by CRC Press. This book was released on 2015-07-28 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous Mixtures and Pavements contains 113 accepted papers from the 6th International ConferenceBituminous Mixtures and Pavements (6th ICONFBMP, Thessaloniki, Greece, 10-12 June 2015). The 6th ICONFBMP is organized every four years by the Highway Engineering Laboratory of the Aristotle University of Thessaloniki, Greece, in conjunction with
Download or read book Advances in Smart Materials and Innovative Buildings Construction Systems written by Ayman S. Mosallam and published by Springer Nature. This book was released on 2023-11-30 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a comprehensive guide to the latest developments in building and bridge construction. The book covers a wide range of topics, including the use of advanced materials such as fiber-reinforced polymer (FRP) composites and the incorporation of smart technologies into design and construction of buildings and bridges. The book discusses advantages of using FRP composites in building and bridge construction. It then goes on to explore the use of smart technologies, such as sensors and structural health monitoring systems, to improve performance and safety of structures. It also covers the use of advanced concrete and masonry materials and methods, including high-performance concrete, self-consolidating concrete, and advanced masonry systems. The book is written for engineers, architects, and construction professionals and provides a detailed overview of the latest research and developments in the field. It includes case studies and practical examples to illustrate key concepts and techniques, making it an invaluable resource for those involved in building and bridge construction. With its comprehensive coverage of the latest advances in building and bridge construction, "Advances in Concrete, Masonry and FRP Composite Smart Buildings and Bridges" is an essential guide for anyone looking to stay current with the latest trends and technologies in the industry.
Download or read book Bituminous Mixtures and Pavements VIII written by A.F. Nikolaides and published by CRC Press. This book was released on 2024-06-21 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous Mixtures and Pavements VIII contains 114 papers as presented at the 8th International Conference ‘Bituminous Mixtures and Pavements’ (8th ICONFBMP, 12-14 June 2024, Thessaloniki, Greece). The contributions reflect the research and practical experience of academics and practicing engineers from thirty-four (34) different countries, and cover a wide range of topics: Session I: Bitumen, Modified binders, Aggregates, and Subgrade Session II: Bituminous mixtures (Design, Construction, Testing, Performance) Session III: Pavements (Design, Construction, Maintenance, Sustainability, Energy and Environmental consideration) Session IV: Pavement management and Geosynthetics Session V: Pavement recycling Session VI: Pavement surface characteristics, Pavement performance monitoring, Safety Session VII: Biomaterials in pavement engineering Session VIII: Prediction models of pavement performance Bituminous Mixtures and Pavements VIII covers recent advances in highway materials technology and pavement engineering, and will be of interest to scientists and professionals involved or interested in these areas. The ICONFBMP-conferences have been organized every four years since 1992. This 8th conference was jointly organized by: Laboratory of Highway Engineering, Aristotle University of Thessaloniki, Greece; Built Environment Research Institute (BERI), University of Ulster, UK; University of Texas San Antonio (UTSA), USA; Laboratory for Advanced Construction Technology (LACT), Technological Institute of Iowa, USA; Technological University of Delft (TUDelft), The Netherlands, and University of Antwerp, (UA), Belgium.
