Download or read book Water Pipeline Condition Assessment written by Utility Engineering and Surveying Institute (American Society of Civil Engineers). Task Committee on Water Pipeline Condition Assessment and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOP 134 provides water utilities with an appropriate path for adequately determining the structural status of an individual transmission pipeline or pipeline system.

Download or read book Workshop on Condition Assessment Inspection Devices for Water Transmission Mains written by K. Lillie and published by American Water Works Association. This book was released on 2005-05-31 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many water utilities have only a limited knowledge of the structural condition of their underground assests. In order to maintain optimum serviceability, it is increasingly important that utilities gain a better understanding of the current condition and performance of these buried assets. Regular inspection and condition assessment of pipelines can greatly assist utilities with developing robust and cost-effective operational maintenance programs, which will optimize capital expenditure whilst minimizing risk. The aim of the project was to conduct a state-of-the-art literature review of non-interruptive condition assessment inspection devices for large diameter transmission mains (greater than 12 inches). In addition, an expert panel workshop was to be held to review business needs and drivers, the performance of existing technologies, and future underground asset condition assessment research needs. Originally published by AwwaRF for its subscribers in 2004.

Download or read book EcoWater Solutions Ltd Pipeline Condition Assessment Report written by City Design (Firm) and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pipeline Condition Assessment written by City Design (Firm) and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water and Wastewater Pipeline Assessment Technologies written by Justin Starr and published by CRC Press. This book was released on 2021-06-01 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water and wastewater infrastructure are a somewhat invisible, yet critical, part of modern life. Incredibly, many buried assets have been in service for 50-100 years and are still in good condition. Conversely, other systems fail well before their predicted design lives, causing property damage, injury, and even loss of life. In many cases, early detection could have prevented catastrophic failure, and understanding the state of underground infrastructure has become a key priority for many municipalities. Industry has responded with a number of new and innovative technologies for condition assessment, however, understanding these tools can be difficult, as many vendors treat their proprietary systems as trade secrets. Water and Wastewater Pipeline Assessment Technologies: Classification Systems, Sensors, and Results Interpretation provides a thorough guide to the technical workings of some of the most popular water and wastewater assessment technologies available, including CCTV crawlers, acoustic listening devices, laser sensors, 360 ̊ video cameras, pipe penetrating radar, and more. Features: Presents an overview of current technologies in CCTV inspection, including next generation video formats, high-definition resolution, and fisheye/sidescan technology. Provides helpful tips and tricks to cut through technical jargon and identify the technological specifications to compare between multiple vendors. Examines the pros and cons of competing technologies including laser and lidar, and provides an overview of unique approaches such as Pipe Penetrating Radar, Focused Electrode Leak Location, and more. Highlights the importance of coding standards, data management, and software tools that can be leveraged to create a successful asset management program. Water and Wastewater Pipeline Assessment Technologies: Classification Systems, Sensors, and Results Interpretation provides a mixture of theory and real-world, practical considerations ranging from deployment tips and data exchange formats to the technical limitations of different technologies. The book is a valuable resource for municipal employees, project engineers, and others involved in designing and implementing major inspection programs.

Download or read book Leak Detection and Condition Assessment for Water Distribution Pipelines Using Fluid Transient Waves written by Jinzhe Gong and published by . This book was released on 2013 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The focus of this PhD research is to develop non-invasive and cost-effective techniques for assessing the structural condition of pressurised pipelines using fluid transient pressure waves. The specific objectives include the detection of leaks and localised deterioration that is distributed along a pipeline, such as extended sections of corrosion or the spalling of cement lining. The latter is described by pipeline condition assessment in this thesis. The transient behaviour of a leak is studied in the frequency domain. Numerical studies conducted in this research demonstrate that two leak-induced patterns (on the resonant and the anti-resonant responses) can exist in a frequency response diagram (FRD). The amplitudes of the responses are related to the impedance of the valve in a reservoir-pipeline-valve (RPV) system. A new leak detection technique has been developed in this research based on the further understanding of the leak-induced patterns. This technique uses the relative sizes of the first three resonant responses to determine the location and size of a single leak in RPV systems. In reservoir-pipeline-dead end systems, the information required for single event leak detection is further reduced to the first two resonant responses. A new measurement strategy for the extraction of the FRD of single pipelines is proposed in this research. The boundary valve loss is used to adjust the amplitude of the leak-induced pattern on the resonant responses and also the sharpness of the resonant peaks. A specific type of pseudo-random binary sequence (PRBS) termed the inverse repeat sequence (IRS), is used as the excitation signal. The antisymmetric property of IRS enables part of the nonlinear responses of the system under excitation to be cancelled out, yielding a measured FRD close to the theoretical linear system response. A side-discharge valve based transient generator is designed and fabricated in this research to implement the new FRD measurement strategy. Laboratory experiments are conducted on an intact pipeline and a pipeline with a leak. This research also conducts analysis of the characteristics of distributed pipe wall deterioration and develops new detection techniques. In a measured pressure trace, the size of the reflection resulting from a section of pipeline with a change in wall thickness is indicative of the characteristic impedance of this section. Once the impedance of this section is determined, the wave speed and wall thickness can be estimated. A technique for the detection of a single deteriorated section in pipelines is developed based on the above analysis. Two other condition assessment techniques are developed to deal with the complexities induced by multiple deteriorated sections. The first technique is termed reconstructive MOC (method of characteristics) analysis, which uses the pressure trace measured at the upstream face of the valve in a RPV system to determine the distribution of the impedance along the pipeline. The algorithm reconstructs a MOC grid by calculating the MOC compatibility equations backwards in time, estimating the properties of the pipeline (impedance, wave speed) and the length of each pipe reach as discretised by the MOC grid from the valve towards the reservoir. Preliminary experimental verification is conducted to verify the applicability of the new technique. The second technique is reconstructive transient analysis (RTA), which can be conducted at any interior accessible points along a pipeline, and does not require a RPV boundary condition. The RTA uses two pressure transducers in close proximity to measure two transient pressure traces in one test. A signal processing algorithm is developed to extract the directional transient waves (traveling upstream and downstream). The use of the directional transient waves enables the step response function (SRF) of the section of pipe upstream or downstream of the paired pressure transducers to be obtained. The reconstructive MOC analysis is then adapted to interpret the SRF to yield the distribution of the impedance, from which the location and severity of distributed deterioration can be identified." -- abstract, pages v-vi.

Download or read book Workshop on Condition Assessment Inspection Devices for Water Transmission Mains written by Kevin Lillie and published by . This book was released on 2004 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interruption of water supply service during inspection of large-diameter transmission mains can have undesirable impacts on drinking water utilities and their customers. Likewise, the failure of a large transmission main can disrupt the supply of water to a large portion of a community, causing significant inconvenience and damage. Therefore, regular inspection of mains can assist utilities with preventative maintenance and minimize risks. Typically, utilities conduct condition assessment of buried pipes to determine a pipeline & rsquo;s serviceability and to consider if a new main or rehabilitation are needed. In the past, many condition-assessment methods involved the excavation and removal of pipe sections. Nondestructive evaluation techniques were rarely used or thought of as viable options. In addition, utilities were unable to use existing condition-assessment technologies for lines in service due to constraints and limitations, such as water levels in the mains. New technologies appear to offer some hope for an effective and affordable solution; however, details of these technologies may not be widely known. Consequently, the industry needs further evaluation of condition-assessment technologies that are capable of being used while maintaining service to the main.

Download or read book M77 Condition Assessment of Water Mains written by and published by . This book was released on 2019 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Condition Assessment for Drinking Water Pipelines written by Sunhil Sinha and published by . This book was released on 2014 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Primer on Condition Curves for Water Mains written by U S Environmental Protection Agency and published by CreateSpace. This book was released on 2014-08-01 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of economical tools to prioritize pipe renewal based upon structural condition and remaining asset life is essential to effectively manage water infrastructure assets for both large and small diameter pipes. One tool that may facilitate asset management is a condition curve. A condition curve is a graphical representation of the condition of a pipeline versus time. This report provides a review of the state-of-the-technology for structural/physical condition curves for water mains. Various models are summarized such as break frequency curves, deterioration/decay/survival curves, condition rating curves and condition rating indices, and serviceability/performance curves. This report also provides new case study information on how condition curves are used by utilities for managing their water infrastructure based upon a survey of nine utilities. The utilities that were surveyed for these case studies used methods that ranged from very detailed asset management programs that combine inspection, monitoring, and test data with their pipeline condition assessment program to simple analyses of pipe break history to prioritize pipeline renewal activities. The review also discusses short-term and long-term research needs for further development of a performance-based buried infrastructure asset management approach to improve the quality and quantity of data used by all utilities.

Download or read book Pipelines 2011 written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2011-07-22 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Pipelines 2011 Conference, held in Seattle, Washington, July 23-27, 2011. Sponsored by the Pipeline Division of ASCE. This collection contains 135 peer-reviewed technical papers that discuss new solutions to some of the most critical infrastructure issues involving pipelines. The U.S. water and wastewater infrastructure systems are continuing to deteriorate. The recent economic downturn has increased the gap between current and required levels of funding. These serious financial constraints highlight the urgent need for creative and innovative solutions to improve our water and wastewater infrastructure systems. From the technical perspective, cost effective materials, proper planning, new design methods, innovative construction technologies, and advanced condition assessment technologies must be more aggressively developed, tested, and introduced to the industry. From the management perspective, optimal use of financial resources, smart and carefully crafted decision making processes on maintenance, rehabilitation and replacement activities must be made available, applied by and used by water and wastewater infrastructure agencies.

Download or read book Concrete Pressure Pipe 3rd Ed written by American Water Works Association and published by American Water Works Association. This book was released on 2008 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive manual of water supply practices explains the design, selection, specification, installation, transportation, and pressure testing of concrete pressure pipes in potable water service.

Download or read book Condition Assessment of Water Mains written by Awwa and published by . This book was released on 2019 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides technical information to aid utility managers and engineers in making informed decisions, along with practical information about how methods can be deployed.

Download or read book Leak Detection written by Stuart Hamilton and published by IWA Publishing. This book was released on 2013-06-30 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ageing infrastructure and declining water resources are major concerns with a growing global population. Controlling water loss has therefore become a priority for water utilities around the world. In order to improve efficiencies, water utilities need to apply good practices in leak detection. Leak Detection: Technology and Implementation assists water utilities with the development and implementation of leak detection programs. Leak detection and repair is one of the components of controlling water loss. In addition, techniques are discussed within this book and relevant case studies are presented. This book provides useful and practical information on leakage issues.

Download or read book Drinking Water Distribution Systems written by National Research Council and published by National Academies Press. This book was released on 2007-01-22 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

Download or read book Rehabilitation of Water Mains written by American Water Works Association and published by American Water Works Association. This book was released on 2001 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: P. 16.

Download or read book New Pipeline Technologies Security and Safety written by Mohammad Najafi and published by . This book was released on 2003 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 200 papers presented at the ASCE International Conference on Pipeline Engineering and Construction, held in Baltimore, Maryland, July 13-16, 2003.