Download or read book Water and Wastewater Engineering written by Mackenzie L Davis and published by McGraw Hill Professional. This book was released on 2010-04-05 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: An In-Depth Guide to Water and Wastewater Engineering This authoritative volume offers comprehensive coverage of the design and construction of municipal water and wastewater facilities. The book addresses water treatment in detail, following the flow of water through the unit processes and coagulation, flocculation, softening, sedimentation, filtration, disinfection, and residuals management. Each stage of wastewater treatment--preliminary, secondary, and tertiary--is examined along with residuals management. Water and Wastewater Engineering contains more than 100 example problems, 500 end-of-chapter problems, and 300 illustrations. Safety issues and operation and maintenance procedures are also discussed in this definitive resource. Coverage includes: Intake structures and wells Chemical handling and storage Coagulation and flocculation Lime-soda and ion exchange softening Reverse osmosis and nanofiltration Sedimentation Granular and membrane filtration Disinfection and fluoridation Removal of specific constituents Drinking water plant residuals management, process selection, and integration Storage and distribution systems Wastewater collection and treatment design considerations Sanitary sewer design Headworks and preliminary treatment Primary treatment Wastewater microbiology Secondary treatment by suspended and attached growth biological processes Secondary settling, disinfection, and postaeration Tertiary treatment Wastewater plant residuals management Clean water plant process selection and integration

Download or read book Water and Wastewater Engineering Systems written by D. Barnes and published by Pitman Publishing. This book was released on 1981-01-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Water and Wastewater Engineering Design Principles and Practice Second Edition written by Mackenzie L. Davis and published by McGraw Hill Professional. This book was released on 2019-10-04 with total page 1349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A Fully Updated, In-Depth Guide to Water and Wastewater Engineering Thoroughly revised to reflect the latest advances, procedures, and regulations, this authoritative resource contains comprehensive coverage of the design and construction of municipal water and wastewater facilities. Written by an environmental engineering expert and seasoned academic, Water and Wastewater Engineering: Design Principles and Practice, Second Edition, offers detailed explanations, practical strategies, and design techniques as well as hands-on safety protocols and operation and maintenance procedures. You will get cutting-edge information on water quality standards, corrosion control, piping materials, energy efficiency, direct and indirect potable reuse, and more. Coverage includes: • The design and construction processes • General water supply design considerations • Intake structures and wells • Chemical handling and storage • Coagulation and flocculation • Lime-soda and ion exchange softening • Reverse osmosis and nanofiltration • Sedimentation • Granular and membrane filtration • Disinfection and fluoridation • Removal of specific constituents • Water plant residuals management, process selection, and integration • Storage and distribution systems • Wastewater collection and treatment design considerations • Sanitary sewer design • Headworks and preliminary treatment • Primary treatment • Wastewater microbiology • Secondary treatment by suspended growth biological processes • Secondary treatment by attached growth and hybrid biological processes • Tertiary treatment • Advanced oxidation processes • Direct and indirect potable reuse

Download or read book Water and Wastewater Treatment written by Joanne E. Drinan and published by CRC Press. This book was released on 2012-07-20 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lauded for its engaging, highly readable style, the best-selling first edition became the premier guide for nonengineers involved in water and wastewater treatment operations. Water and Wastewater Treatment: A Guide for the Nonengineering Professional, Second Edition continues to provide a simple, nonmathematical account of the unit processes used to treat both drinking water and wastewater. Completely revised and expanded, this second edition adds new material on technological advances, regulatory requirements, and other current issues facing the water and wastewater industries. Using step-by-step, jargon-free language, the authors present all the basic unit processes involved in drinking water and wastewater treatment. They describe each unit process, the function of the process in water or wastewater treatment, and the basic equipment used in each process. They also explain how the processes fit together within a drinking water or wastewater treatment system and discuss the fundamental concepts that constitute water and wastewater treatment processes as a whole. Avoiding mathematics, chemistry, and biology, the book includes numerous illustrations for easy comprehension of concepts and processes. It also contains chapter summaries and an extensive glossary of terms and abbreviations for quick reference.

Download or read book Water and Wastewater Engineering Systems written by and published by . This book was released on 1986 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fair Geyer and Okun s Water and Wastewater Engineering written by Nazih K. Shammas and published by John Wiley and Sons. This book was released on 2010-10-19 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text series of Water and Wastewater Engineering have been written in a time of mounting urbanisation and industrialisation and resulting stress on water and wastewater systems. Clean and ample sources of water for municipal uses are becoming harder to find and more expensive to develop. The text is comprehensive and covers all aspects of water supply, water sources, water distribution, sanitary sewerage and urban stormwater drainage. This wide coverage is helpful to engineers in their every day practice.

Download or read book Advances in Water and Wastewater Treatment written by Rao Y. Surampalli and published by ASCE Publications. This book was released on 2004-01-01 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation "Advances in Water and Wastewater Treatment provides state-of-the-art information on the application of innovative technologies for water and wastewater treatment with an emphasis on the scientific principles for pollutant or pathogen removal. Described in detail are the practice and principles of wastewater treatment on topics such as: global warming, sustainable development, nutrient removal, bioplastics production, biosolid digestion and composting, pathogen reduction, metal leaching, secondary clarifiers, surface and subsurface constructed wetland, and wastewater reclamation. Environmental engineers and scientists involved in the practice of environmental engineering will benefit from the basic principles to innovation technologies application."--BOOK JACKET. Title Summary field provided by Blackwell North America, Inc. All Rights Reserved.

Download or read book Process Science and Engineering for Water and Wastewater Treatment written by Simon Judd and published by IWA Publishing. This book was released on 2002-03-01 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Science and Engineering for Water and Wastewater Treatment is the first in a new series of distance learning course books from IWA Publishing. The new series intends to help readers become familiar with design, operation and management of water and wastewater treatment processes without having to refer to any other texts. Process engineering is considered fundamental to successful water and wastewater treatment and Process Science and Engineering for Water and Wastewater Treatment provides the fundamental chemistry, biology and engineering knowledge needed to learn and understand the underlying scientific principles directly relevant to water and wastewater treatment processes. Units in the text covering chemistry and biology include: fundamentals of water chemistry; chemical kinetics and equilibria; colloid and surface chemistry; fundamentals of microbiology; fundamentals biochemistry and microbial kinetics. The concept of Process Engineering is introduced through units on: mass and heat balances; mass and heat transfer; reactor design theory; engineering hydraulics and particle settlement. The text is designed for individual study at the learner?s own pace. Each section contains multiple features to aid learning, including: boxes highlighting key learning points exercises and problems with fully worked solutions to help the reader test their understanding as they progress through the text a comprehensive set of self-assessment questions (with answers) at the end of each unit Designed as a starting point for the other books in the Water and Wastewater Process Technologies Series, this book also provides a self-contained course of learning in the science and engineering for water and wastewater treatment processes. It forms part of the Masters degree programme taught in the School of Water Sciences at Cranfield University, UK.

Download or read book Fundamentals of Wastewater Treatment and Engineering written by Rumana Riffat and published by CRC Press. This book was released on 2022-04-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd edition of Fundamentals of Wastewater Treatment and Design introduces readers to the fundamental concepts of wastewater treatment, followed by engineering design of unit processes for sustainable treatment of municipal wastewater and resource recovery. It has been completely updated with new chapters to reflect current advances in design, resource recovery practices and research. Another highlight is the addition of the last chapter, which provides a culminating design experience of both urban and rural wastewater treatment systems. Filling the need for a textbook focused on wastewater, it covers history, current practices, emerging concerns, future directions and pertinent regulations that have shaped the objectives of this important area of engineering. Basic principles of reaction kinetics, reactor design and environmental microbiology are introduced along with natural purification processes. It also details the design of unit processes for primary, secondary and advanced treatment, as well as solids processing and removal. Recovery of water, energy and nutrients are explained with the help of process concepts and design applications. This textbook is designed for undergraduate and graduate students who have some knowledge of environmental chemistry and fluid mechanics. Professionals in the wastewater industry will also find this a handy reference.

Download or read book Information Technology in Water and Wastewater Utilities WEF MOP 33 written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2010-08-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Guidelines for Managing Information Technology in Water and Wastewater Utilities This Water Environment Federation resource presents an overview of the information technology (IT) systems, practices, and applications most relevant to utilities. Information Technology in Water and Wastewater Utilities covers strategic planning, IT program development, project management, infrastructure, security, organizational issues, success factors, and challenges. Six real-world case studies highlight specific technical details and illustrate the concepts presented in this authoritative guide. Information Technology in Waste and Wastewater Utilities covers: Business drivers and IT systems and applications IT planning Developing an IT program for a municipal agency IT capital project management IT systems--processes and practices IT security Organizational aspects of IT Critical success factors and key future challenges for IT in water and wastewater utility projects

Download or read book Unit Treatment Processes in Water and Wastewater Engineering written by T. J. Casey and published by . This book was released on 1997-01-17 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outlining the science and technology of the processes used in treating water to meet specific water quality standards, this book emphasizes the common process fundamentals, whether used in drinking water production or wastewater treatment systems. Operations discussed include destabilization of suspensions, sedimentation flotation and sand filtration processes, chemical precipitation, membrane filtration, biological and anaerobic processes, disinfection and fluoridation of water supplies. Includes design examples and computer programs that are available on the Internet.

Download or read book Water and Wastewater Engineering Systems written by David Barnes and published by . This book was released on 1986-01-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wastewater Engineering written by Metcalf & Eddy, Boston and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Project Finance for Water and Wastewater Systems written by Michael Curley and published by CRC Press. This book was released on 1993-03-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Project Finance for Water and Wastewater Systems provides an easy-to-read guide for gaining an understanding of the myriad options available for financing water and wastewater projects and how to evaluate which options are most appropriate. This crucial reference delineates a basic system for comparing the actual costs of various programs. The book describes the seven major factors that can dramatically affect user charges. It then analyzes each funding alternative in terms of these common cost factors. No other book provides such an understandable framework for comparing project costs and their ultimate impact on ratepayer charges. Handbook of Project Finance for Water and Wastewater Systems is an essential book for utility managers, consultants, engineers, regulators, environmental attorneys, and planners. Features Addresses the seven major factors that affect project costs Easy to read Presents easily comparable options

Download or read book Land Treatment Systems for Municipal and Industrial Wastes written by Ronald W. Crites and published by McGraw Hill Professional. This book was released on 2000-03-17 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A-Z guide to soil/plant/microbe-based wastewatertreatment Engineers and planners eager to benefit from the costefficiencies and convenience of land treatment of waste will find practical guidelines in this comprehensive manual. It covers soil hydraulics, vegetation selection, site selection, field investigations, preapplication treatment and storage, and transmission and distribution of wastewater. You're introduced to: Design procedures and appropriate uses for each of the three land treatment processes: soils, plants, and microbiological agents Special attributes of food processing wastewater, with 6 case studies The use of biosolids produced by mechanical treatment systems as crop nutrients Options for preapplication treatment, including ponds and constructed wetlands Much more

Download or read book Privatization of Water Services in the United States written by National Research Council and published by National Academies Press. This book was released on 2002-08-20 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the quest to reduce costs and improve the efficiency of water and wastewater services, many communities in the United States are exploring the potential advantages of privatization of those services. Unlike other utility services, local governments have generally assumed responsibility for providing water services. Privatization of such services can include the outright sale of system assets, or various forms of public-private partnershipsâ€"from the simple provision of supplies and services, to private design construction and operation of treatment plants and distribution systems. Many factors are contributing to the growing interest in the privatization of water services. Higher operating costs, more stringent federal water quality and waste effluent standards, greater customer demands for quality and reliability, and an aging water delivery and wastewater collection and treatment infrastructure are all challenging municipalities that may be short of funds or technical capabilities. For municipalities with limited capacities to meet these challenges, privatization can be a viable alternative. Privatization of Water Services evaluates the fiscal and policy implications of privatization, scenarios in which privatization works best, and the efficiencies that may be gained by contracting with private water utilities.

Download or read book Modelling Simulation and Control of Urban Wastewater Systems written by Manfred Schütze and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.