Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Rubber Recycling written by Jin Kuk Kim and published by Royal Society of Chemistry. This book was released on 2018-10-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber is used in a vast number of products, from tyres on vehicles to disposable surgical gloves. Increasingly both manufacturers and legislators are realising that recycling is essential for environmental sustainability and can improve the cost of manufacture. The volume of rubber waste produced globally makes it difficult to manage as accumulated waste rubber, especially in the form of tyres, can pose a significant fire risk. Recycling rubber not only prevents this problem but can produce new materials with desirable properties that virgin rubbers lack. This book presents an up-to-date overview of the fundamental and applied aspects of renewability and recyclability of rubber materials, emphasising existing recycling technologies with significant potential for future applications along with a detailed outline of new technology based processing of rubber to reuse and recycle. This book will be of interest to researchers in both academia and industry as well as postgraduate students working in polymer chemistry, materials processing, materials science and engineering.

Download or read book Environmental Engineering for the 21st Century written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-03-08 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental engineers support the well-being of people and the planet in areas where the two intersect. Over the decades the field has improved countless lives through innovative systems for delivering water, treating waste, and preventing and remediating pollution in air, water, and soil. These achievements are a testament to the multidisciplinary, pragmatic, systems-oriented approach that characterizes environmental engineering. Environmental Engineering for the 21st Century: Addressing Grand Challenges outlines the crucial role for environmental engineers in this period of dramatic growth and change. The report identifies five pressing challenges of the 21st century that environmental engineers are uniquely poised to help advance: sustainably supply food, water, and energy; curb climate change and adapt to its impacts; design a future without pollution and waste; create efficient, healthy, resilient cities; and foster informed decisions and actions.

Download or read book Sustainable Waste Management Challenges in Developing Countries written by Pariatamby, Agamuthu and published by IGI Global. This book was released on 2019-10-18 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global waste generation increases at a rapid rate, there is a dire need for waste management practices such as collection, disposal, and recycling to protect from environmental pollution. However, developing countries generate two to three times more waste, resort to open dumps more often than developed countries, and are slower to integrate waste management standards. There is a need for studies that examine the waste generation and practices of countries that share similar economic backgrounds as they strive to implement successful waste management techniques. Sustainable Waste Management Challenges in Developing Countries is an essential reference source that discusses the challenges and strategies of waste management practices and the unique waste issues faced by developing countries that prevent them from achieving the goal of integrated waste management. While highlighting topics including e-waste, transboundary movement, and consumption patterns, this book is ideally designed for policymakers, legislators, waste company managers, environmentalists, students, academicians, and municipal planners seeking current research on the global waste management problem.

Download or read book E waste Recycling and Management written by Anish Khan and published by Springer. This book was released on 2019-06-04 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives up-to-date information and broad views on e-waste recycling and management using the latest techniques for industrialist and academicians. It describes the problems of e-waste generated by all global living communities and its impact on our ecosystems and discusses recycling techniques in detail to reduce its effect as well as proper management of e-waste to save the environment. It also considers future technological expectations from e-waste recycling and management technologies.

Download or read book Proceedings of the 20th International Symposium on Advancement of Construction Management and Real Estate written by Yuzhe Wu and published by Springer. This book was released on 2016-05-27 with total page 1311 pages. Available in PDF, EPUB and Kindle. Book excerpt: These conference proceedings offer an outstanding resource for academics and professionals, sharing essential findings on the latest developments in real estate and construction management. The subject is “Advancement of Construction Management and Real Estate” in the context of new-type urbanization. The Chinese Research Institute of Construction Management (CRIOCM), working in close collaboration with Zhejiang University, organized CRIOCM2015, the 20th International Symposium. Written by academics and professionals from all over the world, these proceedings discuss the latest achievements, research outputs and advances between frontier disciplines in the field of construction management and real estate. They cover a wide range of topics, including new-type urbanization, land development and land use, urban development and management, the real estate market and housing policies. The discussions will provide an important reference source on the implementation of new-type urbanization in China and abroad.

Download or read book Why Do We Recycle written by Frank Ackerman and published by Island Press. This book was released on 2013-04-15 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earnest warnings of an impending "solid waste crisis" that permeated the 1980s provided the impetus for the widespread adoption of municipal recycling programs. Since that time America has witnessed a remarkable rise in public participation in recycling activities, including curbside collection, drop-off centers, and commercial and office programs. Recently, however, a backlash against these programs has developed. A vocal group of "anti-recyclers" has appeared, arguing that recycling is not an economically efficient strategy for addressing waste management problems. In Why Do We Recycle? Frank Ackerman examines the arguments for and against recycling, focusing on the debate surrounding the use of economic mechanisms to determine the value of recycling. Based on previously unpublished research conducted by the Tellus Institute, a nonprofit environmental research group in Boston, Massachusetts, Ackerman presents an alternative view of the theory of market incentives, challenging the notion that setting appropriate prices and allowing unfettered competition will result in the most efficient level of recycling. Among the topics he considers are: externality issues -- unit pricing for waste disposal, effluent taxes, virgin materials subsidies, advance disposal fees the landfill crisis and disposal facility siting container deposit ("bottle bill") legislation environmental issues that fall outside of market theory calculating costs and benefits of municipal recycling programs life-cycle analysis and packaging policy -- Germany's "Green Dot" packaging system and producer responsibility the impacts of production in extractive and manufacturing industries composting and organic waste management economics of conservation, and material use and long-term sustainability Ackerman explains why purely economic approaches to recycling are incomplete and argues for a different kind of decisionmaking, one that addresses social issues, future as well as present resource needs, and non-economic values that cannot be translated into dollars and cents. Backed by empirical data and replete with specific examples, the book offers valuable guidance for municipal planners, environmental managers, and policymakers responsible for establishing and implementing recycling programs. It is also an accessible introduction to the subject for faculty, students, and concerned citizens interested in the social, economic, and ethical underpinnings of recycling efforts.

Download or read book Waste Management written by Nanda Gopal Sahoo and published by Nova Science Publishers. This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The management of waste is a sensitive issue which affects everyone all over the globe. With the advent of globalization and urbanization, the amount of waste generated has increased to an extent never seen before. Such an increase has come with threatening consequences. To make human life easier, several innovations have been introduced in recent years, such as the development of plastic goods and electronic items, which have led to an exponential growth in waste. Most waste is untreated and not utilized, and as such it is burned, mismanaged and dumped in landfills. This has endangered our ecosystem, polluted water bodies and caused ecological imbalance in the biosphere. Overall, this waste is spoiling the beauty of our planet and polluting the environment. To overcome this situation, many efforts have been made by the scientific community and municipal bodies to no avail. Thus, there is a great need for efficient scientific waste management approaches as well as advanced technology that can convert waste into value-added products. There are many ways to tackle this, but more research and development in this area is required to achieve desired results. This book explores a new aspect of managing waste and developing efficient technology to convert this waste into value-added products. It reviews challenges and advancements in waste management technologies and gives direction for future planning. It also provides cutting-edge knowledge on classification and management of waste, recycling and upcycling of waste into value-added products or carbon nanomaterials, utilization of waste towards enhancing the global economy, the role of microorganisms for the treatment of waste, the role of nanotechnology in waste treatment and water purification, and management of e-waste and biomedical waste. This book will emerge as a reference guide that overviews up-to-date literature in the field of waste and its management, challenges, converting technology and future possibilities"--

Download or read book Recycling from Waste in Fashion and Textiles written by Pintu Pandit and published by John Wiley & Sons. This book was released on 2020-07-15 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The alarming level of greenhouse gases in the environment, fast depleting natural resources and the increasing level of industrial effluents, have made every single manufacturing activity come under the scrutiny of sustainability. When all kinds of waste such as clothes, furniture, carpets, televisions, shoes, paper, food wastes etc. end up in the landfill, only a few of them are naturally decomposed and thus a large majority remains as non-biodegradable. It is for this reason, efforts are concentrated to reduce the burden on earth by this waste, and as far as used textile products are concerned, there are now attempts to recycle or up-cycle. This book addresses the role of sustainability by using textile waste in fashion and textiles with respect to manufacturing, materials, as well as the economic and business challenges and opportunities it poses. This wide-ranging book comprises 19 chapters on the various topics including: · Solutions for sustainable fashion and textile industry · Agro and bio waste in the fashion industry · Innovating fashion brands by using textile waste · Waste in handloom textiles · Business paradigm shifting: 21st century fashion from recycling and upcycling · Utilization of natural waste for sustainable textile coloration · Circular economy in fashion and textile from waste · Future pathways of waste utilization for fashion · Sustainable encapsulation of natural dyes from Plant waste for textiles · Agro-waste applications for bio-remediation of textile effluent

Download or read book Municipal Solid Waste written by Nikolaos Tzortzakis and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste has grown into a relatively difficult problem to solve for those responsible for its management; these responsibilities include the collection, transport, treatment, and disposal of solid wastes, particularly wastes generated in medium and large urban centres. This problem is even more intense in economically developing countries, where the financial, human, and other critical resources are scarce in general. In the last decade, there has been a great interest and awareness regarding the environmentally safe management of waste worldwide, centralised in legislative, administrative, standardisation, and research activities in this field. Therefore, it is essential to develop short- and long-term waste management strategies (often named the 3Rs) and their consequent implementation in compliance with the formulated priorities for waste: (1) Reduce, (2) Recycle, (3) Reuse and (4) environmentally safe disposal. Several contradictions and lack of agreement still exist, even regarding the major basic definitions, e.g., which material should be treated as "waste" and which as a "beneficial raw material", which wastes are "hazardous" and which are "non-hazardous", etc. Quite often, different approaches and as a consequence, waste management/disposals are adopted for the same situation/materials. Environmental risk assessment procedures and mode of actions are varied greatly not only within national levels, but also at regional levels within the same country by different groups of scientists and/or policy makers. The general idea of the book has arisen from the mutual experience of many specialists in numerous disciplines from different countries involved in the problem of environmental assessment, economic and monitoring approaches, and control approaches for chemicals generated from solid waste disposal. Solid waste worldwide issues nowadays reflect the complexity and unbalanced development of our world at the beginning of the 21st century. This book covers a broad group of wastes, from biowaste to hazardous waste. The contributors to the book are recognised experts in the diverse fields associated with the issues of waste management and the reuse-recycle of materials, and are from different parts of the world. Authors present their experience and approaches considering both international and national/local specifics. The book is addressed to the wide range of end-users, decision-makers and professionals involved in environmental and agricultural issues: administration, designers, manufacturers, policy makers, farmers, researchers, academics and university students, and is focused on waste properties, environmental behaviour and management in an environmentally safe way. It was not the intention of the editor/authors to exhaust the subject, which is intensely broad, but to give a general idea with updating trends in the field of solid waste management concerning disposal, monitoring, assessment and remedial options, which are demonstrated also in case studies. The authors hope that this book to some extent will contribute to the trials and efforts for the proper, environmentally safe practices of solid waste disposal, and will provide state-of-the-art information and discussion, monitoring strategies, advanced approaches and methods, techniques and equipment for environmentally safe disposal and remediation of solid wastes.

Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).

Download or read book WEEE Recycling written by Alexandre Chagnes and published by Elsevier. This book was released on 2016-07-26 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: WEEE Recycling: Research, Development, and Policies covers policies, research, development, and challenges in recycling of waste electrical and electronic equipment (WEEE). The book introduces WEEE management and then covers the environmental, economic, and societal applications of e-waste recycling, focusing on the technical challenges to designing efficient and sustainable recycling processes—including physical separation, pyrometallurgical, and hydrometallurgical processes. The development of processes for recovering strategic and critical metals from urban mining is a priority for many countries, especially those having few available ores mining. - Describes the two metallurgical processes—hydro- and pyro-metallurgy—and their application in recycling of metals - Provides a life cycle analysis in the WEEE recycling of metals - Outlines how to determine economic parameters in the recycling of waste metals - Discusses the socio economic and environmental implication of metal recycling

Download or read book What a Waste 2 0 written by Silpa Kaza and published by World Bank Publications. This book was released on 2018-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.

Download or read book Waste Management and Resource Efficiency written by Sadhan Kumar Ghosh and published by Springer. This book was released on 2018-09-21 with total page 1254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains high-quality research papers presented at Sixth International Conference on Solid Waste Management held at Jadavpur University, Kolkata India during November 23-26, 2016. The Conference, IconSWM 2016, is organized by Centre for Quality Management System, Jadavpur University in association with premier institutes and societies of India. The researchers from more than 30 countries presented their work in Solid Waste Management. The book is divided into two volumes and deliberates on various issues related to innovation and implementation in sustainable waste management, segregation, collection, transportation of waste, treatment technology, policy and strategies, energy recovery, life cycle analysis, climate change, research and business opportunities.

Download or read book E Waste in Transition written by Florin-Constantin Mihai and published by BoD – Books on Demand. This book was released on 2016-06-29 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: E-waste management is a serious challenge across developed, transition, and developing countries because of the consumer society and the globalization process. E-waste is a fast-growing waste stream which needs more attention of international organizations, governments, and local authorities in order to improve the current waste management practices. The book reveals the pollution side of this waste stream with critical implications on the environment and public health, and also it points out the resource side which must be further developed under the circular economy framework with respect to safety regulations. In this context, complicated patterns at the global scale emerge under legal and illegal e-waste trades. The linkages between developed and developing countries and key issues of e-waste management sector are further examined in the book.

Download or read book Can I Recycle This written by Jennie Romer and published by Penguin. This book was released on 2021-04-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: “If you’ve ever been perplexed by the byzantine rules of recycling, you’re not alone…you’ll want to read Can I Recycle This?... An extensive look at what you can and cannot chuck into your blue bin.” —The Washington Post The first illustrated guidebook that answers the age-old question: Can I Recycle This? Since the dawn of the recycling system, men and women the world over have stood by their bins, holding an everyday object, wondering, "can I recycle this?" This simple question reaches into our concern for the environment, the care we take to keep our homes and our communities clean, and how we interact with our local government. Recycling rules seem to differ in every municipality, with exceptions and caveats at every turn, leaving the average American scratching her head at the simple act of throwing something away. Taking readers on a quick but informative tour of how recycling actually works (setting aside the propaganda we were all taught as kids), Can I Recycle This gives straightforward answers to whether dozens of common household objects can or cannot be recycled, as well as the information you need to make that decision for anything else you encounter. Jennie Romer has been working for years to help cities and states across America better deal with the waste we produce, helping draft meaningful legislation to help communities better process their waste and produce less of it in the first place. She has distilled her years of experience into this non-judgmental, easy-to-use guide that will change the way you think about what you throw away and how you do it.

Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.