Download or read book Wafer scale Alignment of Semiconducting Carbon Nanotubes from Solution written by Katherine Rose Jinkins and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are unique one-dimensional materials that exhibit extraordinary properties, including high stability, large elastic modulus, and exceptional charge and thermal transport, making them promising candidates for future mechanical, optical, and electronic devices. Electrical measurements of individual nanotubes have demonstrated room-temperature ballistic conductance and 3× higher current density than state-of-the-art Si field-effect transistors (FETs). While these results are exciting; to achieve the high on-current required for future carbon nanotube technologies to become viable, electronic devices must incorporate multiple nanotubes aligned in parallel. Alignment is especially critical to minimize sheet resistance and reduce charge carrier scattering in devices. However, the alignment of carbon nanotubes at intermediate packing densities in a scalable technique has plagued the electronics community for decades. In this work, we develop, explore, and elucidate three possible solutions to this long-standing challenge. First, we elucidate the mechanism of the floating evaporative self-assembly (FESA) technique, in which stripes of aligned nanotubes are deposited onto substrates by dosing a carbon nanotube ink at a water/substrate interface. We track the key interfaces directly at the substrate during FESA and show that the nanotube alignment occurs from the buried ink/water interface. We also demonstrate improved control over the bandwidth and band spacing of aligned carbon nanotubes and align nanotubes across a 2.5 × 2.5 cm2 substrate, an important step towards high-volume production. Ultimately, though, FESA cannot yield uniform, continuous films of aligned nanotubes over the wafer-scale, so other techniques are explored. We use the understanding gained toward the FESA mechanism to develop another alignment technique, tangential flow interfacial self-assembly (TaFISA), to fabricate uniform films of highly aligned carbon nanotubes for short channel FETs. In this process, we demonstrate that an ink/water interface can induce liquid crystal assembly of carbon nanotubes. Flowing this two-dimensional nematic assembly of nanotubes, globally aligns the nanotubes. By translating a substrate through this flowing ink/water interface, uniform films of highly aligned (within ±5.7°) nanotubes are deposited across 10 cm wide substrates. Due to the underlying lyotropic liquid crystal phenomena, the nanotube ordering improves with increasing concentration and decreasing temperature. The exceptional alignment leads to excellent FET performance with high on-state current density averaging 520 [mu]A [mu]m−1 at a V[DS] of -0.6 V. We also perform a more detailed investigation of experimental parameters that can affect the interfacial assembly, including nanotube ink solvent, substrate surface water contact angle, and modification of the water subphase. We also study the effect of shear on nanotube ink, without the ink/water interface as used in the FESA and TaFISA technique. We elucidate the effect of shear rate on nanotube alignment and find that the alignment increases with increasing shear rate following a power law dependence. We also demonstrate control over the nanotube packing density by tailoring the carbon nanotube ink concentration and ink volume. FETs are fabricated with their charge transport direction parallel and perpendicular to the alignment. The parallel FETs exhibit 7× faster charge carrier mobility of 101 cm2 V−1 s−1, while also simultaneously displaying high on/off ratio of 105. Deposition conditions are extensively optimized to enable alignment within a ± 27° window at nearly ideal packing density of 50 nanotubes [mu]m−1 over large-area 10 × 10 cm2 substrates. These quasi-aligned films are promising candidates for long-channel FETs (e.g., in displays, sensors, and flexible electronics), where some misalignment is necessary to allow charge percolation. We additionally report our work utilizing solution-based shear to fabricate ultrathin films of aligned cellulose nanocrystals. Cellulose nanocrystals (CNC) exhibit excellent mechanical and piezoelectric properties, making this material attractive for use in high-performance coatings. Toward this goal, we use confined shear-based alignment to fabricate ultrathin films of aligned CNC. The shear rate is varied from 19 to 19000 s−1 to improve the half-width at half-maximum of the spread in CNC alignment from 130 to 30°. The CNC solution volume and concentration are both used to independently control the film height.
Download or read book Carbon Nanotube Devices written by and published by John Wiley & Sons. This book was released on 2008-05-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the first AMN volume, this handy reference and textbook examines the topic of nanosystem design in further detail. It explains the physical and chemical basics behind the design and fabrication of nanodevices, covering all important, recent advances in the field, while introducing nanosystems to less experienced readers. The result is an important source for a fast, accurate overview of the state of the art of nanosystem realization, summarizing further important literature.
Download or read book Single Walled Carbon Nanotubes written by Yan Li and published by Springer. This book was released on 2019-05-16 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.
Download or read book Carbon Nanotubes written by Mildred S. Dresselhaus and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a short introduction and a brief review of the relation between carbon nanotubes, graphite and other forms of carbon, the synthesis techniques and growth mechanisms for carbon nanotubes are described. This is followed by reviews on nanotube electronic structure, electrical, optical, and mechanical properties, nanotube imaging and spectroscopy, and nanotube applications.
Download or read book Computational Solutions for Knowledge Art and Entertainment Information Exchange Beyond Text written by Ursyn, Anna and published by IGI Global. This book was released on 2013-10-31 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: As interactive application software such as apps, installations, and multimedia presentations have become pervasive in everyday life, more and more computer scientists, engineers, and technology experts acknowledge the influence that exists beyond visual explanations. Computational Solutions for Knowledge, Art, and Entertainment: Information Exchange Beyond Text focuses on the methods of depicting knowledge-based concepts in order to assert power beyond a visual explanation of scientific and computational notions. This book combines formal descriptions with graphical presentations and encourages readers to interact by creating visual solutions for science-related concepts and presenting data. This reference is essential for researchers, computer scientists, and academics focusing on the integration of science, technology, computing, art, and mathematics for visual problem solving.
Download or read book Carbon Nanotube Electronics written by Ali Javey and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of the field of carbon nanotube electronics. It covers materials and physical properties, synthesis and fabrication processes, devices and circuits, modeling, and finally novel applications of nanotube-based electronics. The book introduces fundamental device physics and circuit concepts of 1-D electronics. At the same time it provides specific examples of the state-of-the-art nanotube devices.
Download or read book Wafer scale Integration of Single walled Carbon Nanotubes for Gas Sensing written by Kiran Chikkadi and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Synthesis Device Dabrication and Circuit Design for Digital Logic Applications written by Albert Lin and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Field Effect Transistor (CNFET) technology has received a lot of attention in the past few years as a promising extension to silicon-CMOS for future digital logic integrated circuits. While recent research has advanced CNFET technology past many important milestones, robust and scalable solutions must be developed to realize the full potential of CNFETs. Thus, this thesis aims to develop a suite of techniques, spanning from material synthesis to circuit solutions, compatible with very-large-scale integration (VLSI). Specifically, to enable the real-world engineering of carbon nanotube integrated circuits, this thesis presents (1) wafer-scale aligned CNT growth, (2) wafer-scale CNT Transfer, (3) wafer-scale device and circuit fabrication techniques, and (4) ACCNT, a VLSI-compatible circuit design solution to surmounting the problem of metallic CNTs. These techniques culminated in the successful demonstration of CNT transistors, inverters, and NAND logic gates on a wafer scale. Furthermore, this thesis sheds light on important design considerations for the demonstration of a simple CNT "computer" and suggests a few critical directions for future work in the field of carbon nanotube technology. In contributing the above, this thesis hopes to propel carbon nanotube technology forward towards the vision of robust, large-scale integrated circuits using high-density carbon nanotubes.
Download or read book Handbook of Visual Display Technology written by Janglin Chen and published by Springer. This book was released on 2012-01-23 with total page 2700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. With expert contributions from over 150 international display professionals and academic researchers, it covers all classes of display device and discusses established principles, emergent technologies, and particular areas of application.
Download or read book UV VIS Spectroscopy and Its Applications written by Heinz-Helmut Perkampus and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: UV-VIS spectroscopy is one of the oldest methods in molecular spectroscopy. The definitive formulation of the Bouguer-Lambert Beer law in 1852 created the basis for the quantitative evaluation of absorption measurements at an early date. This led firstly to colorimetry, then to photometry and finally to spectrophotometry. This evolution ran parallel with the development of detectors for measuring light intensities, i.e. from the human eye via the photo element and photocell, to the photomultiplier and from the photo graphic plate to the present silicon-diode detector both of which allow simultaneous measurement of the complete spectrum. With the development of quantum chemistry, increasing atten tion was paid to the correlation between light absorption and the structure of matter with the result that in recent decades a number of excellent discussions of the theory of electronic spectroscopy (UV-VIS and luminescence sp,~ctroscopy) have been published. Consequently, this extremely ivteresting aspect of molecular spec troscopy has dominated the teaching of the subject both in my own lectures and those of others. However, it is often overlooked that, in addition to the theory, applications of spectroscopic methods are of particular interest to scientists. For this reason, a lecture series about electronic spectroscopy given in the Institute for Physical Chemistry at the Heinrich-Heine-University in Dusseldorf was supplemented by one about "UV-VIS spectroscopy and its applications". This formed the basis of the present book.
Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.
Download or read book Handbook of Research on Maximizing Cognitive Learning through Knowledge Visualization written by Ursyn, Anna and published by IGI Global. This book was released on 2015-02-28 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The representation of abstract data and ideas can be a difficult and tedious task to handle when learning new concepts; however, the advances of emerging technology have allowed for new methods of representing such conceptual data. The Handbook of Research on Maximizing Cognitive Learning through Knowledge Visualization focuses on the use of visualization technologies to assist in the process of better comprehending scientific concepts, data, and applications. Highlighting the utilization of visual power and the roles of sensory perceptions, computer graphics, animation, and digital storytelling, this book is an essential reference source for instructors, engineers, programmers, and software developers interested in the exchange of information through the visual depiction of data.
Download or read book Chemical Solution Deposition of Functional Oxide Thin Films written by Theodor Schneller and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. - Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery - Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines - High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Printed Electronics written by Zheng Cui and published by John Wiley & Sons. This book was released on 2016-04-12 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the newly emerged and highly interdisciplinary field of printed electronics • Provides an overview of the latest developments and research results in the field of printed electronics • Topics addressed include: organic printable electronic materials, inorganic printable electronic materials, printing processes and equipments for electronic manufacturing, printable transistors, printable photovoltaic devices, printable lighting and display, encapsulation and packaging of printed electronic devices, and applications of printed electronics • Discusses the principles of the above topics, with support of examples and graphic illustrations • Serves both as an advanced introductory to the topic and as an aid for professional development into the new field • Includes end of chapter references and links to further reading
Download or read book 1D Semiconducting Nanostructures for Flexible and Large Area Electronics written by Dhayalan Shakthivel and published by Cambridge University Press. This book was released on 2019-10-31 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconducting nanostructures such as nanowires (NWs) have been used as building blocks for various types of sensors, energy storage and generation devices, electronic devices and for new manufacturing methods involving printed NWs. The response of these sensing/energy/electronic components and the new fabrication methods depends very much on the quality of NWs and for this reason it is important to understand the growth mechanism of 1D semiconducting nanostructures. This is also important to understand the compatibility of NW growth steps and tools used in the process with these unconventional substrates such as plastic that are used in flexible and large area electronics. Therefore, this Element presents at length discussion about the growth mechanisms, growth conditions and the tools used for the synthesis of NWs. Although NWs from Si, ZnO and carbon nanotubes (CNTs) are included, the discussion is generic and relevant to several other types of NWs as well as heterostructures.
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
