Download or read book VOC and HAP Recovery Using Ionic Liquids written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: During the manufacture of wood composites, paper, and to a lesser extent, lumber, large amounts of volatile organic compounds (VOCs) such as terpenes, formaldehyde, and methanol are emitted to air. Some of these compounds are hazardous air pollutants (HAPs). The air pollutants produced in the forest products industry are difficult to manage because the concentrations are very low. Presently, regenerative thermal oxidizers (RTOs and RCOs) are commonly used for the destruction of VOCs and HAPs. RTOs consume large amounts of natural gas to heat air and moisture. The combustion of natural gas generates increased CO2 and NOx, which have negative implications for global warming and air quality. The aforementioned problems are addressed by an absorption system containing a room-temperature ionic liquid (RTIL) as an absorbent. RTILs are salts, but are in liquid states at room temperature. RTILs, an emerging technology, are receiving much attention as replacements for organic solvents in industrial processes with significant cost and environmental benefits. Some of these processes include organic synthesis, extraction, and metal deposition. RTILs would be excellent absorbents for exhausts from wood products facilities because of their unique properties: no measurable vapor pressure, high solubility of wide range of organic compounds, thermal stability to 200°C (almost 400°F), and immisciblity with water. Room temperature ionic liquids were tested as possible absorbents. Four were imidizolium-based and were eight phosphonium-based. The imidizolium-based ionic liquids proved to be unstable at the conditions tested and in the presence of water. The phosphonium-based ionic liquids were stable. Most were good absorbents; however, cleaning the contaminates from the ionic liquids was problematic. This was overcome with a higher temperature (120°C) than originally proposed and a very low pressure (1 kPa. Absorption trials were conducted with tetradecy(trihexyl)phosphonium dicyanamide as the RTIL. It was determined that it has good absorption properties for methanol and [alpha]-pinene, is thermally stable, and is relatively easy to synthesize. It has a density of 0.89 g/mL at 20°C and a molecular weight of 549.9 g/mol. Trials were conducted with a small absorption system and a larger absorption system. Methanol, formaldehyde, and other HAPs were absorbed well, nearly 100%. Acetaldehyde was difficult to capture. Total VOC capture, while satisfactory on methanol and [alpha]-pinene in a lab system, was less than expected in the field, 60-80%. The inability to capture the broad spectrum of total organics is likely due to difficulties in cleaning them from the ionic liquid rather than the ability of the ionic liquid to absorb. It's likely that a commercial system could be constructed to remove 90 to 100% of the gas contaminates. Selecting the correct ionic liquid would be key to this. Absorption may not be the main selection criterion, but rather how easily the ionic liquid can be cleaned is very important. The ionic liquid absorption system might work very well in a system with a limited spectrum of pollutants, such as a paint spray line, where there are not very high molecular weight, non volatile, compounds in the exhaust.

Download or read book Production of Biofuels and Chemicals with Ionic Liquids written by Zhen Fang and published by Springer Science & Business Media. This book was released on 2013-10-31 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of ionic liquids to biomass for producing biofuels and chemicals will be one of the hot research areas during the next decade due to the fascinating properties of these versatile group of solvents that allow them to dissolve lignocellulosic materials. The present text provides up-to-date fundamentals, state-of-the-art reviews, current assessments and prospects in this area, including aspects of pretreatment, fermentation, biomass dissolution, cellulose transformation, reaction kinetics and physical properties, as well as the subsequent production of biofuels and platform chemicals such as sugars, aldehydes and acids. Auxiliary methods such as catalysis, microwave and enzymatic techniques used in the transformations are covered. Both researchers and practitioners are certain to find a wealth of information in the individual chapters, which were written by experts in the field to provide an essential basis for assessing possible pretreatment and transformation routes of biomass using ionic liquids, and for developing new methods and chemical processes. Dr. Zhen Fang is Professor of Bioenergy, head of the Chinese Academy of Sciences’ Biomass Group, Xishuangbanna Tropical Botanical Garden and is also an Adjunct Professor of Life Sciences, University of Science and Technology of China. Dr. Richard L Smith, Jr. is Professor of Chemical Engineering at the Graduate School of Environmental Studies, Research Center of Supercritical Fluid Technology, Tohoku University, Japan. Dr. Xinhua Qi is Professor of Environmental Science at Nankai University, China.

Download or read book Introduction to Green Chemistry written by Albert Matlack and published by CRC Press. This book was released on 2010-04-05 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers traditional green chemistry topics, including catalysis, benign solvents, and alternative feedstocks. It also discusses relevant but less frequently covered topics with chapters such as Chemistry of Longer Wear and Population and the Environment. This coverage highlights the importance of chemistry to everyday life and demonstrates the benefits the expanded exploitation of green chemistry can have for society. Copiously illustrated with over 800 figures, this second edition provides an update from the frontiers of the field.

Download or read book Handbook for Critical Cleaning Cleaning agents and systems written by Barbara Kanegsberg and published by CRC Press. This book was released on 2011 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Nearly all companies which manufacture or fabricate high-value physical objects (components, parts, assemblies) perform critical cleaning at one or more stages. These range from the giants of the semiconductor, aerospace, and biomedical world to a host of small to medium to large companies producing a dizzying array of components"--

Download or read book Air Emissions from Animal Feeding Operations written by National Research Council and published by National Academies Press. This book was released on 2003-04-07 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air Emissions from Animal Feeding Operations: Current Knowledge, Future Needs discusses the need for the U.S. Environmental Protection Agency to implement a new method for estimating the amount of ammonia, nitrous oxide, methane, and other pollutants emitted from livestock and poultry farms, and for determining how these emissions are dispersed in the atmosphere. The committee calls for the EPA and the U.S. Department of Agriculture to establish a joint council to coordinate and oversee short - and long-term research to estimate emissions from animal feeding operations accurately and to develop mitigation strategies. Their recommendation was for the joint council to focus its efforts first on those pollutants that pose the greatest risk to the environment and public health.

Download or read book Handbook for Critical Cleaning Second Edition 2 Volume Set written by Barbara Kanegsberg and published by CRC Press. This book was released on 2020-01-02 with total page 1109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set consists of two volumes: Cleaning Agents and Systems and Applications, Processes, and Controls. Updated, expanded, re-organized, and rewritten, this two-volume handbook covers cleaning processes, applications, management, safety, and environmental concerns. The editors rigorously examine technical issues, cleaning agent options and systems, chemical and equipment integration, and contamination control, as well as cleanliness standards, analytical testing, process selection, implementation and maintenance, specific application areas, and regulatory issues. A collection of international contributors gives the text a global viewpoint. Color illustrations, video clips, and animation are available online to help readers better understand presented material.

Download or read book Water Recycling and Resource Recovery in Industry written by Piet Lens and published by IWA Publishing. This book was released on 2002-03-31 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water Recycling and Resource Recovery in Industry: Analysis, Technologies and Implementation provides a definitive and in-depth discussion of the current state-of-the-art tools and technologies enabling the industrial recycling and reuse of water and other resources. The book also presents in detail how these technologies can be implemented in order to maximize resource recycling in industrial practice, and to integrate water and resource recycling in ongoing industrial production processes. Special attention is given to non-process engineering aspects such as systems analysis, software tools, health, regulations, life-cycle analysis, economic impact and public participation. Case studies illustrate the huge potential of environmental technology to optimise resource utilisation in industry. The large number of figures, tables and case studies, together with the book's multidisciplinary approach, makes Water Recycling and Resource Recovery in Industry: Analysis, Technologies and Implementation the perfect reference work for academics, professionals and consultants dealing with industrial water resources recovery. Contents Part I: Industrial reuse for environmental protection Part II: System analysis to assist in closing industrial resource cycles Part III: Characterisation of process water quality Part IV: Technological aspects of closing industrial cycles Part V: Examples of closed water cycles in industrial processes Part VI: Resource protection policies in industry

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book Guide to Industrial Assessments for Pollution Prevention and Energy Efficiency written by and published by DIANE Publishing. This book was released on 2001 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book National Air Quality and Emissions Trends Report written by and published by . This book was released on 1994 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Toxicological Profile for Pyrethrins and Pyrethroids written by and published by . This book was released on 2003 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Green Analytical Chemistry written by Justyna Płotka-Wasylka and published by Springer. This book was released on 2019-08-02 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explains the principles and fundamentals of Green Analytical Chemistry (GAC) and highlights the current developments and future potential of the analytical green chemistry-oriented applications of various solutions. The book consists of sixteen chapters, including the history and milestones of GAC; issues related to teaching of green analytical chemistry and greening the university laboratories; evaluation of impact of analytical activities on the environmental and human health, direct techniques of detection, identification and determination of trace constituents; new achievements in the field of extraction of trace analytes from samples characterized by complex composition of the matrix; “green” nature of the derivatization process in analytical chemistry; passive techniques of sampling of analytes; green sorption materials used in analytical procedures; new types of solvents in the field of analytical chemistry. In addition green chromatography and related techniques, fast tests for assessment of the wide spectrum of pollutants in the different types of the medium, remote monitoring of environmental pollutants, qualitative and comparative evaluation, quantitative assessment, and future trends and perspectives are discussed. This book appeals to a wide readership of the academic and industrial researchers. In addition, it can be used in the classroom for undergraduate and graduate Ph.D. students focusing on elaboration of new analytical procedures for organic and inorganic compounds determination in different kinds of samples characterized by complex matrices composition.Jacek Namieśnik was a Professor at the Department of Analytical Chemistry, Gdańsk University of Technology, Poland. Justyna Płotka-Wasylka is a teacher and researcher at the same department.

Download or read book Technology and Solvents for Extracting Oilseeds and Nonpetroleum Oils written by Peter J. Wan and published by The American Oil Chemists Society. This book was released on 1997 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together current information on technology and solvents for extracting oilseeds. The editors hope that this monograph will serve as a useful reference for the managers and engineers in oil extraction and its allied industries and a starting point for researchers in searching for the optimum solvent for extraction of any given oil-bearing materials.

Download or read book Green Chemistry written by Paul T. Anastas and published by Oxford University Press, USA. This book was released on 1998 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of environmental protection has dealt with hazardous substances by cleaning them up or treating them after the substances have formed. Green Chemistry, however, designs products and processes so that no hazardous materials are used or made in the first place. With applications fromplastic to paints, from automobiles to pharmaceuticals, Green Chemistry is revolutionising science and industry and its impact on the environment.

Download or read book Air Pollution Control Engineering written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2004-07-02 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: A panel of respected air pollution control educators and practicing professionals critically survey the both principles and practices underlying control processes, and illustrate these with a host of detailed design examples for practicing engineers. The authors discuss the performance, potential, and limitations of the major control processes-including fabric filtration, cyclones, electrostatic precipitation, wet and dry scrubbing, and condensation-as a basis for intelligent planning of abatement systems,. Additional chapters critically examine flare processes, thermal oxidation, catalytic oxidation, gas-phase activated carbon adsorption, and gas-phase biofiltration. The contributors detail the Best Available Technologies (BAT) for air pollution control and provide cost data, examples, theoretical explanations, and engineering methods for the design, installation, and operation of air pollution process equipment. Methods of practical design calculation are illustrated by numerous numerical calculations.

Download or read book Air Pollution and Greenhouse Gases written by Zhongchao Tan and published by Springer. This book was released on 2016-09-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook discusses engineering principles relating to air pollution and greenhouse gases (GHGs); it focuses on engineering principles and designs of related devices and equipment for air emission control for a variety of industries such as energy, chemical, and transportation industries. The book aims primarily at senior undergraduate and graduate students in mechanical, chemical and/or environmental engineering departments; it can also be used as a reference book by technical staff and design engineers who are interested in and need to have technical knowledge in air pollution and GHGs. The book is motivated by recent rapid advances in air pollution and greenhouse gas emissions and their control technologies. In addition to classic topics related to air pollution, this book is also featured with emerging topics related to air pollution and GHGs. It covers recent advances in engineering approaches to the reduction of GHG emissions including, but are not limited to, green energy technologies and carbon sequestration and storage. It also introduces an emerging topic in air pollution, which is referred to as Nano Air Pollution. It is a growing concern in air pollution, but largely missing in similar books, likely because of recent rapid advances in nanotechnology has outpaced the advances in nano air pollution control.

Download or read book Liquid Membranes written by Vladimir S Kislik and published by Elsevier. This book was released on 2009-08-31 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid Membranes: Principles and Applications in Chemical Separations and Wastewater Treatment discusses the principles and applications of the liquid membrane (LM) separation processes in organic and inorganic chemistry, analytical chemistry, biochemistry, biomedical engineering, gas separation, and wastewater treatment. It presents updated, useful, and systematized information on new LM separation technologies, along with new developments in the field. It provides an overview of LMs and LM processes, and it examines the mechanisms and kinetics of carrier-facilitated transport through LMs. It also discusses active transport, driven by oxidation-reduction, catalytic, and bioconversion reactions on the LM interfaces; modifications of supported LMs; bulk aqueous hybrid LM processes with water-soluble carriers; emulsion LMs and their applications; and progress in LM science and engineering. This book will be of value to students and young researchers who are new to separation science and technology, as well as to scientists and engineers involved in the research and development of separation technologies, LM separations, and membrane reactors. - Provides comprehensive knowledge-based information on the principles and applications of a variety of liquid membrane separation processes - Contains a critical analysis of new technologies published in the last 15 years