Download or read book VLSI Systems and Computations written by H.T. Kung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this book were presented at the CMU Conference on VLSI Systems and Computations, held October 19-21, 1981 in Pittsburgh, Pennsylvania. The conference was organized by the Computer Science Department, Carnegie-Mellon University and was partially supported by the National Science Foundation and the Office of Naval Research. These proceedings focus on the theory and design of computational systems using VLSI. Until very recently, integrated-circuit research and development were concentrated in the device physics and fabrication design disciplines and in the integrated-circuit industry itself. Within the last few years, a community of researchers is growing to address issues closer to computer science: the relationship between computing structures and the physical structures that implement them; the specification and verification of computational procosses implemented in VLSI; the use of massively parallel computing made possible by VLSI; the design of special purpose computing architectures; and the changes in general-purpose computer architecture that VLSI makes possible. It is likely that the future exploitation of VLSI technology depends as much on structural and design innovations as on advances in fabrication technology. The book is divided into nine sections: - Invited Papers. Six distinguished researchers from industry and academia presented invited papers. - Models of Computation. The papers in this section deal with abstracting the properties of VLSI circuits into models that can be used to analyze the chip area, time or energy required for a particular computation.

Download or read book VLSI Systems and Computations written by H. T. Kung and published by . This book was released on 1982-01-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of VLSI System Planning written by Allen M. Dewey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a new type of computer aided VLSI design tool, called a VLSI System Planning, that is meant to aid designers dur ing the early, or conceptual, state of design. During this stage of design, the objective is to define a general design plan, or approach, that is likely to result in an efficient implementation satisfying the initial specifications, or to determine that the initial specifications are not realizable. A design plan is a collection of high level design decisions. As an example, the conceptual design of digital filters involves choosing the type of algorithm to implement (e. g. , finite impulse response or infinite impulse response), the type of polyno mial approximation (e. g. , Equiripple or Chebyshev), the fabrication technology (e. g. , CMOS or BiCMOS), and so on. Once a particu lar design plan is chosen, the detailed design phase can begin. It is during this phase that various synthesis, simulation, layout, and test activities occur to refine the conceptual design, gradually filling more detail until the design is finally realized. The principal advantage of VLSI System Planning is that the increasingly expensive resources of the detailed design process are more efficiently managed. Costly redesigns are minimized because the detailed design process is guided by a more credible, consistent, and correct design plan.

Download or read book An Analog VLSI System for Stereoscopic Vision written by Misha Mahowald and published by Springer Science & Business Media. This book was released on 1994-03-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Analog VLSI System for Stereoscopic Vision investigates the interaction of the physical medium and the computation in both biological and analog VLSI systems by synthesizing a functional neuromorphic system in silicon. In both the synthesis and analysis of the system, a point of view from within the system is adopted rather than that of an omniscient designer drawing a blueprint. This perspective projects the design and the designer into a living landscape. The motivation for a machine-centered perspective is explained in the first chapter. The second chapter describes the evolution of the silicon retina. The retina accurately encodes visual information over orders of magnitude of ambient illumination, using mismatched components that are calibrated as part of the encoding process. The visual abstraction created by the retina is suitable for transmission through a limited bandwidth channel. The third chapter introduces a general method for interchip communication, the address-event representation, which is used for transmission of retinal data. The address-event representation takes advantage of the speed of CMOS relative to biological neurons to preserve the information of biological action potentials using digital circuitry in place of axons. The fourth chapter describes a collective circuit that computes stereodisparity. In this circuit, the processing that corrects for imperfections in the hardware compensates for inherent ambiguity in the environment. The fifth chapter demonstrates a primitive working stereovision system. An Analog VLSI System for Stereoscopic Vision contributes to both computer engineering and neuroscience at a concrete level. Through the construction of a working analog of biological vision subsystems, new circuits for building brain-style analog computers have been developed. Specific neuropysiological and psychophysical results in terms of underlying electronic mechanisms are explained. These examples demonstrate the utility of using biological principles for building brain-style computers and the significance of building brain-style computers for understanding the nervous system.

Download or read book Introduction To Vlsi Systems written by Mead & Conway and published by . This book was released on 2003 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is written to introduce all Electrical Engineering & Computer Science students to integrate system architecture and design. Combined with individual study in related research areas and participation in large system design projects, this text provides the basis for a graduate course sequence in integrated systems. However, it is primarily intended for use in intensive undergraduate courses on the subject. The material can be used to augment courses on computer architecture. This text provides enough essential information about devices, circuits, fabrication technology, logic design techniques and system architecture to enable the reader to fully span the entire range of abstractions from the underlying physics to complete VLSI digital computer systems.

Download or read book Area efficient VLSI Computation written by Charles Eric Leiserson and published by MIT Press (MA). This book was released on 1983 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parallel Algorithms for Matrix Computations written by K. Gallivan and published by SIAM. This book was released on 1990-01-01 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes a selection of important parallel algorithms for matrix computations. Reviews the current status and provides an overall perspective of parallel algorithms for solving problems arising in the major areas of numerical linear algebra, including (1) direct solution of dense, structured, or sparse linear systems, (2) dense or structured least squares computations, (3) dense or structured eigenvaluen and singular value computations, and (4) rapid elliptic solvers. The book emphasizes computational primitives whose efficient execution on parallel and vector computers is essential to obtain high performance algorithms. Consists of two comprehensive survey papers on important parallel algorithms for solving problems arising in the major areas of numerical linear algebra--direct solution of linear systems, least squares computations, eigenvalue and singular value computations, and rapid elliptic solvers, plus an extensive up-to-date bibliography (2,000 items) on related research.

Download or read book Defect and Fault Tolerance in VLSI Systems written by C.H. Stapper and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Higher circuit densities, increasingly more complex application ohjectives, and advanced packaging technologies have suhstantially increased the need to incorporate defect-tolerance and fault-tolerance in the design of VLSI and WSI systems. The goals of defect-tolerance and fault-tolerance are yield enhancement and improved reliahility. The emphasis on this area has resulted in a new field of interdisciplinary scientific research. I n fact, advanced methods of defect/fault control and tolerance are resulting in enhanced manufacturahility and productivity of integrated circuit chips, VI.SI systems, and wafer scale integrated circuits. In 1987, Dr. W. Moore organized an "International Workshop on Designing for Yield" at Oxford University. Edited papers of that workshop were published in reference [II. The participants in that workshop agreed that meetings of this type should he con tinued. preferahly on a yearly hasis. It was Dr. I. Koren who organized the "IEEE Inter national Workshop on Defect and Fault Tolerance in VLSI Systems" in Springfield Massachusetts the next year. Selected papers from that workshop were puhlished as the first volume of this series [21.

Download or read book Algorithms and Complexity written by Bozzano G Luisa and published by Elsevier. This book was released on 1990-09-12 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first part presents chapters on models of computation, complexity theory, data structures, and efficient computation in many recognized sub-disciplines of Theoretical Computer Science.

Download or read book Naval Research Reviews written by and published by . This book was released on 1979 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to VLSI Systems written by Carver Mead and published by Addison Wesley Publishing Company. This book was released on 1980 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mos devices and circuits - Integrated system fabrication - Data and control flow in systematic structures - Implementing integrated system designs : from circuit topology to patterning geometry to wafer fabrication - Overview of an LSI computer system, and the design of the OM2 data PATH CHIP - Architecture and design of system controllers, and the design of the OM2 controller CHIP - System timing - Highly concurrent systems - Physics of computational systems.

Download or read book Systolic Signal Processing Systems written by E. Swartzlander and published by CRC Press. This book was released on 1987-08-31 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about systolic signal processing systems: networks of signal processors with efficient data flow between the processors. It is written for students, engineers, and managers who wish a concise introduction to the key concepts and future directions of systolic processor architectures.

Download or read book Harnessing VLSI System Design with EDA Tools written by Rajanish K. Kamat and published by Springer Science & Business Media. This book was released on 2011-10-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the proliferation of VHDL, the reference material also grew in the same order. Today there is good amount of scholarly literature including many books describing various aspects of VHDL. However, an indepth review of these books reveals a different story. Many of them have emerged simply as an improved version of the manual. While some of them deal with the system design issues, they lack appropriate exemplifying to illustrate the concepts. Others give large number of examples, but lack the VLSI system design issues. In nutshell, the fact which gone unnoticed by most of the books, is the growth of the VLSI is not merely due to the language itself, but more due to the development of large number of third party tools useful from the FPGA or semicustom ASIC realization point of view. In the proposed book, the authors have synergized the VHDL programming with appropriate EDA tools so as to present a full proof system design to the readers. In this book along with the VHDL coding issues, the simulation and synthesis with the various toolsets enables the potential reader to visualize the final design. The VHDL design codes have been synthesized using different third party tools such as Xilinx Web pack Ver.11, Modelsim PE, Leonrado Spectrum and Synplify Pro. Mixed flow illustrated by using the above mentioned tools presents an insight to optimize the design with reference to the spatial, temporal and power metrics.

Download or read book Defect and Fault Tolerance in VLSI Systems written by Israel Koren and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an edited selection of papers presented at the International Workshop on Defect and Fault Tolerance in VLSI Systems held October 6-7, 1988 in Springfield, Massachusetts. Our thanks go to all the contributors and especially the members of the program committee for the difficult and time-consuming work involved in selecting the papers that were presented in the workshop and reviewing the papers included in this book. Thanks are also due to the IEEE Computer Society (in particular, the Technical Committee on Fault-Tolerant Computing and the Technical Committee on VLSI) and the University of Massachusetts at Amherst for sponsoring the workshop, and to the National Science Foundation for supporting (under grant number MIP-8803418) the keynote address and the distribution of this book to all workshop attendees. The objective of the workshop was to bring t. ogether researchers and practition ers from both industry and academia in the field of defect tolerance and yield en ha. ncement in VLSI to discuss their mutual interests in defect-tolerant architectures and models for integrated circuit defects, faults, and yield. Progress in this area was slowed down by the proprietary nature of yield-related data, and by the lack of appropriate forums for disseminating such information. The goal of this workshop was therefore to provide a forum for a dialogue and exchange of views. A follow-up workshop in October 1989, with C. H. Stapper from IBM and V. K. Jain from the University of South Florida as general co-chairmen, is being organized.

Download or read book Serial Data Computation written by Stewart G. Smith and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with advances in serial-data computa tional architectures, and the CAD tools for their implementation in silicon. The bit-serial tradition at Edinburgh University (EU) stretches back some 6 years to the conception of the FIRST silicon compiler. FIRST owes much of its inspiration to Dick Lyon, then at Xerox P ARC, who proposed a 'structured-design' methodology for construction of signal processing systems from bit-serial building blocks. Based on an nMOS cell-library, FIRST automates much of Lyon's physical design process. More recently, we began to feel that FIRST should be able to exploit more modern technologies. Before this could be achieved, we were faced with a massive manual re-design task, i. e. the porting of FIRST cell-library to a new technology. As it was to avoid such tasks that FIRST was conceived in the first place, we decided to move the level of user-specification much nearer to the silicon level (while still hiding details of transistor circuit design, place and route etc. , from the user), and by so doing, enable the specification of more functionally powerful libraries in technology-free form. The results of this work are in evidence as advances in serial-data design techniques, and the SECOND silicon compiler, introduced later in this book. These achievements could not have been accomplished without help from various sources. We take this opportunity to thank Profs.

Download or read book Fehlertolerierende Rechensysteme Fault tolerant Computing Systems written by Winfried Görke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch enthält die Beiträge der 4. GI/ITG/GMA-Fachtagung über Fehlertolerierende Rechensysteme, die im September 1989 in einer Reihe von Tagungen in München 1982, Bonn 1984 sowie Bremerhaven 1987 veranstaltet wurde. Die 31 Beiträge, darunter 4 eingeladene, sind teils in deutscher, überwiegend aber in englischer Sprache verfa€t. Insgesamt wird durch diese Beiträge die Entwicklung der Konzeption und Implementierung fehlertoleranter Systeme in den letzten zwei Jahren vor allem in Europa dokumentiert. Sämtliche Beiträge berichten über neue Forschungs- oder Entwicklungsergebnisse.

Download or read book VLSI DIGITAL SIGNAL PROCESSING SYSTEMS DESIGN AND IMPLEMENTATION written by Keshab K. Parhi and published by John Wiley & Sons. This book was released on 2007 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Students in graduate level courses· Electrical Engineers· Computer Scientists· Computer Architecture Designers· Circuit Designers· Algorithm Designers· System Designers· Computer Programmers in the Multimedia and Wireless Communications Industries· VLSI System Designers Special Features: This example-packed resource provides invaluable professional training for a rapidly-expanding industry. · Presents a variety of approaches to analysis, estimation, and reduction of power consumption in order to help designers extend battery life.· Includes application-driven problems at the end of each chapter· Features six appendices covering shortest path algorithms used in retiming, scheduling, and allocation techniques, as well as determining the iteration bound· The Author is a recognized expert in the field, having written several books, taught several graduate-level classes, and served on several IEEE boards About The Book: This book complements the other Digital Signaling Processing books in our list, which include an introductory treatment (Marven), a comprehensive handbook (Mitra), a professional reference (Kaloupsidis), and others which pertain to a specific topic such as noise control. This graduate level textbook will fill an important niche in a rapidly expanding market.