Download or read book Beam Processing Technologies written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam Processing Technologies is a collection of papers that deals with the miniaturization of devices that will be faster, consume less power, and cost less per operation or fabrication. One paper discusses metal oxide semiconductor (MOS) integrated circuit technology including the operation of devices whose lateral and vertical dimensions are scaled down. If the devices' silicon doping profiles are increased by the same scale factor, they can operate on lower voltages and currents, with the same performance. Another paper describes laser beam processing and wafer-scale integration as techniques to increase the number of devices on a silicon chip. Electron beam technologies can be used in many fabrication processes such as in microlithography, selective oxidation, doping, metrology. Ion beam applications depend on the presence of the ion introduced into the device (e.g. implantation doping), on pseudoelastic collisions (e.g. physical sputtering or crystal damage), and on inelastic scattering (e.g. polymer resist exposure). Silicon molecular beam epitaxy (SiMBE) can also grow high-quality layers at low temperature, particularly concerning germanium, especially as reagrds the growth system design and utilization of n- and p-type doping. Chemical beam epitaxy (CBE) is another epitaxial growth technique that can surpass MBE and metal organic chemical vapor deposition (MO-CVD). The collection is suitable chemical engineers, industrial physicists, and researchers whose work involve micro-fabrication and development of integrated circuits.
Download or read book VLSI Electronics Microstructure Science written by Norman G. Einspruch and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VLSI Electronics Beam processing technologies written by Norman G. Einspruch and published by . This book was released on 1989 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VLSI Electronics Beam processing technologies written by Norman G. Einspruch and published by . This book was released on 1981 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VLSI electronics microstructure science written by Norman G. Einspruch and published by . This book was released on 1989 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Beam Technologies for Integrated Processing written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam technologies play an important role in microelectronic component fabrication and offer opportunities for application in other manufacturing schemes. Emerging beam technologies that incorporate potential for sensors, control, and information processing have created new opportunities for integrated processing of materials and components. This volume identifies various beam technologies and their applications in electronics and other potential manufacturing processes. Recommendations for research and development to enhance the understanding, capabilities, and applications of beam technologies are presented.
Download or read book VLSI Electronics written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics
Download or read book Fundamentals of Semiconductor Processing Technology written by Badih El-Kareh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech nologies. This book is written with the need for a "bridge" between different disciplines in mind. It is intended to present to engineers and scientists those parts of modem processing technologies that are of greatest importance to the design and manufacture of semi conductor circuits. The material is presented with sufficient detail to understand and analyze interactions between processing and other semiconductor disciplines, such as design of devices and cir cuits, their electrical parameters, reliability, and yield.
Download or read book VLSI Technology written by Yasuo Tarui and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origin of the development of integrated circuits up to VLSI is found in the invention of the transistor, which made it possible to achieve the ac tion of a vacuum tube in a semiconducting solid. The structure of the tran sistor can be constructed by a manufacturing technique such as the intro duction of a small amount of an impurity into a semiconductor and, in ad dition, most transistor characteristics can be improved by a reduction of dimensions. These are all important factors in the development. Actually, the microfabrication of the integrated circuit can be used for two purposes, namely to increase the integration density and to obtain an improved perfor mance, e. g. a high speed. When one of these two aims is pursued, the result generally satisfies both. We use the Engl ish translation "very large scale integration (VLSIl" for "Cho LSI" in Japanese. In the United States of America, however, similar technology is bei ng developed under the name "very hi gh speed integrated circuits (VHSIl". This also originated from the nature of the integrated circuit which satisfies both purposes. Fortunately, the Japanese word "Cho LSI" has a wider meani ng than VLSI, so it can be used ina broader area. However, VLSI has a larger industrial effect than VHSI.
Download or read book Handbook of VLSI Microlithography written by John N. Helbert and published by William Andrew. This book was released on 2001-04-01 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook gives readers a close look at the entire technology of printing very high resolution and high density integrated circuit (IC) patterns into thin resist process transfer coatingsùincluding optical lithography, electron beam, ion beam, and x-ray lithography. The book's main theme is the special printing process needed to achieve volume high density IC chip production, especially in the Dynamic Random Access Memory (DRAM) industry. The book leads off with a comparison of various lithography methods, covering the three major patterning parameters of line/space, resolution, line edge and pattern feature dimension control. The book's explanation of resist and resist process equipment technology may well be the first practical description of the relationship between the resist process and equipment parameters. The basics of resist technology are completely coveredùincluding an entire chapter on resist process defectivity and the potential yield limiting effect on device production.Each alternative lithographic technique and testing method is considered and evaluated: basic metrology including optical, scanning-electron-microscope (SEM) techniques and electrical test devices, along with explanations of actual printing tools and their design, construction and performance. The editor devotes an entire chapter to today's sophisticated, complex electron-beam printers, and to the emerging x-ray printing technology now used in high-density CMOS devices. Energetic ion particle printing is a controllable, steerable technology that does not rely on resist, and occupies a final section of the handbook.
Download or read book VLSI Electronics written by Norman G. Einspruch and published by Academic Press. This book was released on 1981-08-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics: Microstructure Science, Volume 1 assesses trends for the future of very large scale integration (VLSI) electronics and the scientific base that supports its development. This book discusses the manufacturing process technology for MOS VLSI, principles of optical lithography, and resolution limitations for submicron lithography. The research and resource at the national submicron facility, limitations of small devices and large systems, and physics and modeling of submicron insulated-gate field-effect transistors are also elaborated. This text likewise covers the government role in VLSI and VLSI as a major new tool for productivity improvement. This volume is suitable for scientists and engineers who wish to become familiar with VLSI electronics, device designers concerned with the fundamental character of and limitations to device performance, systems architects who will be charged with tying VLSI circuits together, and engineers conducting work on the utilization of VLSI circuits in specific areas of application.
Download or read book Photon Beam and Plasma Assisted Processing written by E.F. Krimmel and published by Elsevier. This book was released on 1989-02-01 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium attracted 82 papers which were presented orally or as posters. Fourteen invited speakers presented state of the art reviews and aspects of future key topics in this increasingly important area of materials science. The high level of scientific presentation during the conference enhanced the aim of the symposium, which was to stimulate discussion amongst materials scientists, chemists, engineers and physicists with a common interest in this field and to disseminate knowledge of progress.
Download or read book Plasma Processing for VLSI written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics: Microstructure Science, Volume 8: Plasma Processing for VLSI (Very Large Scale Integration) discusses the utilization of plasmas for general semiconductor processing. It also includes expositions on advanced deposition of materials for metallization, lithographic methods that use plasmas as exposure sources and for multiple resist patterning, and device structures made possible by anisotropic etching. This volume is divided into four sections. It begins with the history of plasma processing, a discussion of some of the early developments and trends for VLSI. The second section, Deposition, discusses deposition techniques for VLSI such as sputtering metals for metallization and contacts, plasma-enhanced chemical vapor deposition of metals and suicides, and plasma enhanced chemical vapor deposition of dielectrics. The part on Lithography presents the high-resolution trilayer resist system, pulsed x-ray sources for submicrometer x-ray lithography, and high-intensity deep-UV sources. The last part, Etching, provides methods in etching, like ion-beam etching using reactive gases, low-pressure reactive ion etching, and the uses of inert-gas ion milling. The theory and mechanisms of plasma etching are described and a number of new device structures made possible by anisotropic etching are enumerated as well. Scientists, engineers, researchers, device designers, and systems architects will find the book useful.
Download or read book VLSI Science and Technology 1982 written by Conrad J. Dell'Oca and published by . This book was released on 1982 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ULSI Technology written by C. Y. Chang and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1996 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This text follows the tradition of Sze's highly successful pioneering text on VLSI technology and is updated with the latest advances in the field of microelectronic chip fabrication. Since computer chips are foundations of modern electronics, these topics are essential for the next generation of USLI technologies, allowing more transistors to be packaged on a single chip. Contributing to each chapter are industry experts, specializing in topics such as epitaxy with low temperature process, rapid thermal processes, low damage plasma reactive ion etching, fine line litography, cleaning technology, clean room technology, packing and reliability."--
Download or read book Handbook of VLSI Microlithography written by William B. Glendinning and published by William Andrew. This book was released on 2012-12-02 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook gives readers a close look at the entire technology of printing very high resolution and high density integrated circuit (IC) patterns into thin resist process transfer coatings-- including optical lithography, electron beam, ion beam, and x-ray lithography. The book's main theme is the special printing process needed to achieve volume high density IC chip production, especially in the Dynamic Random Access Memory (DRAM) industry. The book leads off with a comparison of various lithography methods, covering the three major patterning parameters of line/space, resolution, line edge and pattern feature dimension control. The book's explanation of resist and resist process equipment technology may well be the first practical description of the relationship between the resist process and equipment parameters. The basics of resist technology are completely covered -- including an entire chapter on resist process defectivity and the potential yield limiting effect on device production. Each alternative lithographic technique and testing method is considered and evaluated: basic metrology including optical, scanning-electron-microscope (SEM) techniques and electrical test devices, along with explanations of actual printing tools and their design, construction and performance. The editor devotes an entire chapter to today's sophisticated, complex electron-beam printers, and to the emerging x-ray printing technology now used in high-density CMOS devices. Energetic ion particle printing is a controllable, steerable technology that does not rely on resist, and occupies a final section of the handbook.
Download or read book VLSI Electronics Microstructure Science written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics: Microstructure Science, Volume 7 presents a comprehensive exposition and assessment of the developments and trends in VLSI (Very Large Scale Integration) electronics. This treatise covers subjects that range from microscopic aspects of materials behavior and device performance to the comprehension of VLSI in systems applications. Each chapter is prepared by a recognized authority. The topics contained in this volume include a basic introduction to the application of superconductivity in high-speed digital systems; the expected impact of VLSI technology on the implementation of AI (artificial intelligence); the limits to improvement of silicon integrated circuits; and the various spontaneous noise sources in VLSI circuits and their effect on circuit operation. Scientists, engineers, researchers, device designers, and systems architects will find the book very useful.
