Download or read book Visualizing with CAD written by Daniela Bertol and published by . This book was released on 2014-01-15 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Visualizing with CAD written by Daniela Bertol and published by Springer. This book was released on 2013-11-11 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: I spent the first twenty six years of my life in Rome. I used to go for ice cream to a popular place near the Pantheon and I remem ber the excitement I felt, beyond the chocolate and whipped cream, when I entered this ancient Roman temple. After staring at the "shower" of light coming from the circular opening at the center of the dome, as strong as a spotlight, I remember being attracted almost hypnotically to the place below the opening. I remember counting the coffers carving the concave dome, com posed in five rows of circular arrays, and could feel the power and protection created by the concave space. I also recall going every Sunday to Piazza San Pietro. This Baroque square is well known for its colonnades, which have an oval shape defined by two interlocking circles. For each of these circles there is a mark, located approximately at its center, from which the four aligned rows of columns appear as one. Before entering the church, almost as a part of a ritual, I had to find the mark in the pavement of the oval square. I was amazed by how the rows of columns could appear and disappear according to my position in relation to the mark:.
Download or read book Visualizing with CAD written by Daniela Bertol and published by Springer. This book was released on 1994-08-26 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: I spent the first twenty six years of my life in Rome. I used to go for ice cream to a popular place near the Pantheon and I remem ber the excitement I felt, beyond the chocolate and whipped cream, when I entered this ancient Roman temple. After staring at the "shower" of light coming from the circular opening at the center of the dome, as strong as a spotlight, I remember being attracted almost hypnotically to the place below the opening. I remember counting the coffers carving the concave dome, com posed in five rows of circular arrays, and could feel the power and protection created by the concave space. I also recall going every Sunday to Piazza San Pietro. This Baroque square is well known for its colonnades, which have an oval shape defined by two interlocking circles. For each of these circles there is a mark, located approximately at its center, from which the four aligned rows of columns appear as one. Before entering the church, almost as a part of a ritual, I had to find the mark in the pavement of the oval square. I was amazed by how the rows of columns could appear and disappear according to my position in relation to the mark:.
Download or read book Software Visualization written by Stephan Diehl and published by Springer Science & Business Media. This book was released on 2007-05-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is an ideal textbook on software visualization, written especially for students and teachers in computer science. It provides a broad and systematic overview of the area including many pointers to tools available today. Topics covered include static program visualization, algorithm animation, visual debugging, as well as the visualization of the evolution of software. The author's presentation emphasizes common principles and provides different examples mostly taken from seminal work. In addition, each chapter is followed by a list of exercises including both pen-and-paper exercises as well as programming tasks.
Download or read book 4D CAD and Visualization in Construction written by Raymond Issa and published by CRC Press. This book was released on 2003-01-01 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction enterprise is being transformed by visual modelling. Tools such as 3D/4D CAD and virtual reality are now in widespread use in construction. This book is both a survey of the changes being made in practice and a detailed guide to future directions for research and development. This book features a number of detailed case studies and
Download or read book Visualizing and the Use of CAD in Architecture written by and published by . This book was released on 1991 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Visualization with AutoCAD written by Suining Ding and published by Fairchild Books. This book was released on 2008-08-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interior designers use AutoCAD software for their drafting and rendering, but where do they learn to apply basic AutoCAD drafting standards and procedures to their specific needs? Modeling and Visualization with AutoCAD answers the question with tutorials that show students how to use AutoCAD software for such drawings as floor plans, reflected ceiling plans, interior elevations, and casework sections. Covering both 2-D and 3-D AutoCAD, the book introduces the method of importing digital images into the material library. This book introduces AutoCAD in a generic way to accommodate the minor differences between newer and older versions; the emphasis is on typical procedures and methods rather than a more detailed process.Its case studies use ancient and modern masterpieces of interior design to demonstrate various applications so that students cannot only develop their rendering skills in a creative way, but also build upon their knowledge and appreciation of the classical elements of design.Features-- Easy to follow step-by-step tutorials for different levels of learners-- Chapter objectives, key terms, and exercises to help students practice what they have learned-- Integration of instructions for applying AutoCAD functions to interior design and pre-sentation of masterpieces that enhance learners' appreciation of classical architectural forms-- Full color illustrations created with the most recent version of AutoCAD to demonstrate results that can also be achieved with earlier versions-- Instructor's Guide provides suggestions for planning the course and using the text in the classroom
Download or read book Visualization and Engineering Design Graphics with Augmented Reality Second Edition written by Mariano Alcaniz and published by SDC Publications. This book was released on 2014 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed as a learning tool to help the aspiring engineer learn the language of engineering graphics. In this regard, this book is hardly unique, as there have been literally hundreds of books published in the past that had a similar goal. The main challenge faced by engineering graphics books comes from the difficulty of representing and describing three dimensional information on paper, which is a consequence of the two dimensional nature of printed materials. What makes this book invaluable is the use of Augmented Reality, a technology that will allow you to escape the limitations of traditional materials enabling you, the student, to truly visualize the objects being described in full 3D. To take full advantage of this book you will need a smartphone, tablet or computer with a web camera, along with the software or apps provided*. Many parts of the book are linked to specific augmented reality content through a series of black and white markers that have been seamlessly integrated throughout the pages. In order to experience the content, your device’s camera must be pointed at these markers. The main marker, available at the beginning of the book, is used to interact with the augmented reality models, which will be rendered in real time in your device’s screen. * If you do not have an iOS device, Android device or a computer with a webcam, SolidWorks files of the models used throughout the book are included on the CD. In addition, STL files have been provided so the models can be opened using your solid modeling CAD package of choice or printed using a 3D printer.
Download or read book Visualization of CAD Objects Using a Stereoscopic Display written by and published by . This book was released on 1995 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subjects memorized the shape of a static 3-D object displayed on a stereoscopic CRT. In each of a series of trials that followed, single static objects were presented. The angular orientation of each trial object was one of six 36-degree increments relative to the angle of the memorized stimulus. The subject's task was to determine, as quickly and accurately as possible, whether the trial object was the same shape as the memorized object or its mirrored image. One of the two cases was always true. Disparity and interposition were manipulated in a within-subject manner during the initial memorization period and the trials that followed. Subject response time and error rate were evaluated. The experimental objective was to determine the extent to which stereopsis and hidden surface affect subjects' ability to (1) transfer to and retrieve from long-term memory spatial information about a 3-D object, and (2) visualize spatial characteristics in a quick and direct manner. Improved performance due to hidden surface is the most convincing experimental finding. The study also found a significant but limited stereopsis effect.
Download or read book Computer Visualization for the Theatre written by Gavin Carver and published by Taylor & Francis. This book was released on 2013-06-26 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theatre designers using 3D software for computer visualisation in the theatre will find this book both a guide to the creative design process as well as an introduction to the use of computers in live performance. Covering the main software packages in use: Strata Studio Base, 3D Studio Max and 3D Studio Viz, the book provides techniques for 3D modelling alongside creative ideas and concepts for working in 3D space. Projects are provided to sharpen your awareness and digital skills as well as suggested further reading to broaden the scope of your theatrical and design knowledge. This book is both a useful day to day reference as well as an inspirational starting point for implementing your own ideas. The authors are experienced trainers in the field and understand the pitfalls to be avoided as well as the possibilities to be explored using computer visualisation for designing theatre space. They provide insightful hands on descriptions of techniques used in the development of performance projects set in the wider context of design considerations. The book is highly informative about the technology of computer visualisation providing examples of working practice applicable to all software.
Download or read book Realistic Architectural Visualization with 3ds Max and mental ray written by Roger Cusson and published by Taylor & Francis. This book was released on 2012-11-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bring new realism to your visualizations with a command of the 3ds Max toolset. Three step-by-step tutorials demonstrate exterior and interior, day and night lighting scenes. You learn the nuts and bolts of importing models from CAD programs, lighting, applying mr shaders and materials, and optimizing your renders. Mental ray is made simple with an accessible description of its tools.
Download or read book Visualization and Engineering Design Graphics with Augmented Reality Third Edition written by Mariano Alcaniz and published by SDC Publications. This book was released on 2019-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a learning tool to help the aspiring engineer learn the language of engineering graphics. In this regard, this book is hardly unique, as there have been literally hundreds of books published in the past that had a similar goal. The main challenge faced by engineering graphics books comes from the difficulty of representing and describing three dimensional information on paper, which is a consequence of the two dimensional nature of printed materials. What makes this book invaluable is the use of Augmented Reality, a technology that will allow you to escape the limitations of traditional materials enabling you, the student, to truly visualize the objects being described in full 3D. To take full advantage of this book you will need a smartphone, tablet or computer with a camera, along with the apps provided.* Many parts of the book are linked to specific augmented reality content through a series of black and white markers that have been seamlessly integrated throughout the pages. In order to experience the content, your device’s camera must be pointed at these markers. The main marker, available at the beginning of the book, is used to interact with the augmented reality models, which will be rendered in real time in your device’s screen. * If you do not have an iOS or Android device, or a computer with a webcam, SOLIDWORKS files of the models used throughout the book are available for download. In addition, STL files are available so the models can be opened using your solid modeling CAD package of choice or printed using a 3D printer.
Download or read book Cognition During Visualization written by David Matthew Kirwin and published by . This book was released on 1987 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Big Book of Dashboards written by Steve Wexler and published by John Wiley & Sons. This book was released on 2017-04-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference book with real-world solutions you won't find anywhere else The Big Book of Dashboards presents a comprehensive reference for those tasked with building or overseeing the development of business dashboards. Comprising dozens of examples that address different industries and departments (healthcare, transportation, finance, human resources, marketing, customer service, sports, etc.) and different platforms (print, desktop, tablet, smartphone, and conference room display) The Big Book of Dashboards is the only book that matches great dashboards with real-world business scenarios. By organizing the book based on these scenarios and offering practical and effective visualization examples, The Big Book of Dashboards will be the trusted resource that you open when you need to build an effective business dashboard. In addition to the scenarios there's an entire section of the book that is devoted to addressing many practical and psychological factors you will encounter in your work. It's great to have theory and evidenced-based research at your disposal, but what will you do when somebody asks you to make your dashboard 'cooler' by adding packed bubbles and donut charts? The expert authors have a combined 30-plus years of hands-on experience helping people in hundreds of organizations build effective visualizations. They have fought many 'best practices' battles and having endured bring an uncommon empathy to help you, the reader of this book, survive and thrive in the data visualization world. A well-designed dashboard can point out risks, opportunities, and more; but common challenges and misconceptions can make your dashboard useless at best, and misleading at worst. The Big Book of Dashboards gives you the tools, guidance, and models you need to produce great dashboards that inform, enlighten, and engage.
Download or read book AutoCAD 2012 For Dummies written by David Byrnes and published by John Wiley & Sons. This book was released on 2011-05-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: A full-color guide to the #1 architectural drafting program—AutoCAD 2012! AutoCAD is the leading software used to create 2D and 3D technical drawings. Used by engineers, architects, and drafting professionals, it can be complex and is a perfect subject for the tried-and-true For Dummies format. Full-color illustrations make the instructions even easier to follow, because examples in the book appear exactly as they will on the screen. Explains AutoCAD and gets readers quickly up to speed on the latest version Features full-color illustrations that look the same as the AutoCAD 2012 screens, making the interface and the all-important Model view easier to understand Covers all the new features, creating a basic layout, using AutoCAD DesignCenter, drawing and editing, working with dimensions, adding text, and more Newcomers to AutoCAD will easily master the software with help from this full-color edition of AutoCAD 2012 For Dummies.
Download or read book Modeling and Visualizing Interiors written by Kingsley K. Wu and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for students with some knowledge of CAD but not necessarily with AutoCAD R13, as well as designers and drafters in interior space planning and architectural firms, this text serves as a tutorial through the creation of specific three- dimensional objects and interior spaces. Illustrated wit
Download or read book Cooperative Design Visualization and Engineering written by Yuhua Luo and published by Springer Science & Business Media. This book was released on 2010-09-20 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many papers in this volume re?ect, to some degree, the active, rapid economic developmentincertaingeographicareasintheworldsuchasChina,Japan,South Korea,and EasternEurope, which demand cooperative work,particularly co- erative engineering, more than ever. New concepts and new ideas of cooperative design, visualization, and engineering have emerged to meet the higher demand resulting from the economic development in these areas. Another trend among the papers in this volume is to apply existing concepts and methods to new application areas. The emergence of new concepts can be considered as a signal of fruitful research with its maturity in the ?eld. This can be found in the papers of this year’s conference. Cooperative design, visualization, and engineering via cloud computing is a new concept presented in a group of papers in this volume. The concept of cloud has been proposed for cooperative manufacturing, large scale cooperative simulation, and visualization, etc. Applying existing concepts to new application areas or creating new me- ods based on them is a logicaldirection to takefull advantageof the cooperative design, visualization, and engineering technology. This is no doubt the best way to widen anddeepen the knowledgein the ?eld. Typicalexamples in this volume include the cooperative visualization of DNA microarray data in bioinform- ics, astrophysical simulations, natural disaster simulations, and cooperative risk assessment, etc. As the volume editor, I would like to congratulate all the authors for their research and development results, raising cooperative technology to a new level.
