Download or read book Ordered and Turbulent Patterns in Taylor Couette Flow written by C. David Andereck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seldom does a physical system, particularly one as apparently simple as the flow of a Newtonian fluid between concentric rotating cylinders, retain the interest of scientists, applied mathematicians and engineers for very long. Yet, as this volume goes to press it has been nearly 70 years since G. I. Taylor's outstanding experimental and theoretical study of the linear stability of this flow was published, and a century since the first experiments were performed on rotating cylinder viscometers. Since then, the study of this system has progressed enormously, but new features of the flow patterns are still being uncovered. Interesting variations on the basic system abound. Connections with open flows are being made. More complex fluids are used in some experiments. The vigor of the research going on in this particular example of nonequilibrium systems was very apparent at the NATO Advanced Research Workshop on "Ordered and Turbulent Patterns in Taylor Couette Flow," held in Columbus, Ohio, USA May 22-24, 1991. A primary goal of this ARW was to bring together those interested in pattern formation in the classic Taylor Couette problem with those looking at variations on the basic system and with those interested in related systems, in order to better define the interesting areas for the future, the open questions, and the features common (and not common) to closed and open systems. This volume contains many of the contributions presented during the workshop.
Download or read book Particle Image Velocimetry written by Ronald J. Adrian and published by Cambridge University Press. This book was released on 2011 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.
Download or read book B nard Cells and Taylor Vortices written by E. L. Koschmieder and published by Cambridge University Press. This book was released on 1993-02-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the motions resulting from heating a fluid layer from below.
Download or read book Physics of Rotating Fluids written by Christoph Egbers and published by Springer. This book was released on 2008-01-11 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to recent developments in the field of rotating fluids, in particular the study of Taylor--Couette flow, spherical Couette flow, planar Couette flow, as well as rotating annulus flow. Besides a comprehensive overview of the current state of the art, possible future directions in this research field are investigated. The first part of this volume presents several new results in the classical Taylor--Couette system covering diverse theoretical, experimental and numerical work on bifurcation theory, influence of boundary conditions, counter-rotating flows, spiral vortices and many others. The second part focuses on spherical Couette flows, including isothermal flows, thermal convective motion, as well as magnetohydrodynamics in spherical shells. The remaining parts are devoted to Goertler vortices, rotating annulus flows, as well as superfluid Couette flows. The present book will be of interest to all researchers and graduate students working actively in the field.
Download or read book Advances in Fluid Mechanics and Turbomachinery written by Hans J. Rath and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume are mostly in the area of computational fluid dynamics (CFD). Furthermore, to some extend this volume contains also contributions from the field of new experimental mehtods and diagnostics applied to fluid dynamics, combustions and turbomachniery. the contributed papers cover diverse topics such as pipe flows, shock tube flows, compressor flows as well as velocity and turbulence measurements of flow conditioners. There is also a survey article on recent flow computations on high performance computers. Articles are also devoted to liquid-liquid systems, rotating fluid flows and combustion diagnostics.
Download or read book Advances in Computational Methods in Sciences and Engineering 2005 2 vols written by Theodore Simos and published by CRC Press. This book was released on 2022-05-04 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together selected contributed papers presented at the International Conference of Computational Methods in Science and Engineering (ICCMSE 2005), held in Greece, 21 aEURO" 26 October 2005. The conference aims to bring together computational scientists from several disciplines in order to share methods and ideas. The ICCMSE is unique in its kind. It regroups original contributions from all fields of the traditional Sciences, Mathematics, Physics, Chemistry, Biology, Medicine and all branches of Engineering. It would be perhaps more appropriate to define the ICCMSE as a conference on computational science and its applications to science and engineering. Topics of general interest are: Computational Mathematics, Theoretical Physics and Theoretical Chemistry. Computational Engineering and Mechanics, Computational Biology and Medicine, Computational Geosciences and Meteorology, Computational Economics and Finance, Scientific Computation. High Performance Computing, Parallel and Distributed Computing, Visualization, Problem Solving Environments, Numerical Algorithms, Modelling and Simulation of Complex System, Web-based Simulation and Computing, Grid-based Simulation and Computing, Fuzzy Logic, Hybrid Computational Methods, Data Mining, Information Retrieval and Virtual Reality, Reliable Computing, Image Processing, Computational Science and Education etc. More than 800 extended abstracts have been submitted for consideration for presentation in ICCMSE 2005. From these 500 have been selected after international peer review by at least two independent reviewers.
Download or read book Flow at Ultra High Reynolds and Rayleigh Numbers written by Russell J. Donnelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists have learned to use liquid and gaseous helium to overcome the limitations imposed by the usual wind and water tunnels for testing the performance of aircraft or the behavior of the atmosphere. This book covers fundamental studies of the turbulence problem, practical applications of turbulence, superfluid turbulence, cryogenic turbulence research, and new types of miniature flow instrumentation, all which are crucial for high Reynolds number research. This state-of-the-art presentation will interest physicists in fluid dynamics, engineers working with turbulent flows, and naval and aerospace engineers testing realistic parameter ranges.
Download or read book Origin of Turbulence written by Hua-Shu Dou and published by Springer Nature. This book was released on 2022-03-25 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the new discovery of the origin of turbulence from Navier–Stokes equations. The fully developed turbulence is found to be composed of singularities of flow field. The mechanisms of flow stability and turbulent transition are described using the energy gradient theory, which states all the flow instability and breakdown resulted from the gradient of the total mechanical energy normal to the flow direction. This approach is universal for flow instability in Newtonian flow and non-Newtonian flow. The theory has been used to solve several problems, such as plane and pipe Poiseuille flows, plane Couette flow, Taylor–Couette flow, flows in straight coaxial annulus, flows in curved pipes and ducts, thermal convection flow, viscoelastic flow, and magnet fluid flow, etc. The theory is in agreement with results from numerical simulations and experiments. The analytical method used in this book is novel and is different from the traditional approaches. This book includes the fundamental basics of flow stability and turbulent transition, the essentials of the energy gradient theory, and the applications of the theory to several practical problems. This book is suitable for researchers and graduate students.
Download or read book Boundaries Interfaces and Transitions written by Michel C. Delfour and published by American Mathematical Soc.. This book was released on 1998 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together tools that have been developed in a priori distant areas of mathematics, mechanics and physics. It provides coverage of selected contemporary problems in the areas of optimal design, mathematical models in material sciences, hysteresis, superconductivity, phase transition, crystal growth, moving boundary problems, thin shells and some of the associated numerical issues.
Download or read book The Couette Taylor Problem written by Pascal Chossat and published by Springer. This book was released on 1994-03-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. 1 A paradigm About one hundred years ago, Maurice Couette, a French physicist, de signed an apparatus consisting of two coaxial cylinders, the space between the cylinders being filled with a viscous fluid and the outer cylinder being rotated at angular velocity O2. The purpose of this experiment was, follow ing an idea of the Austrian physicist Max Margules, to deduce the viscosity of the fluid from measurements of the torque exerted by the fluid on the inner cylinder (the fluid is assumed to adhere to the walls of the cylinders). At least when O is not too large, the fluid flow is nearly laminar and 2 the method of Couette is valuable because the torque is then proportional to 110 , where II is the kinematic viscosity of the fluid. If, however, O is 2 2 increased to a very large value, the flow becomes eventually turbulent. A few years later, Arnulph Mallock designed a similar apparatus but allowed the inner cylinder to rotate with angular velocity 01, while O2 = o. The surprise was that the laminar flow, now known as the Couette flow, was not observable when 0 exceeded a certain "low" critical value Ole, even 1 though, as we shall see in Chapter II, it is a solution of the model equations for any values of 0 and O .
Download or read book Nonlinear Waves and Pattern Dynamics written by Nizar Abcha and published by Springer. This book was released on 2018-04-20 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the fascinating phenomena associated with nonlinear waves and spatio-temporal patterns. These appear almost everywhere in nature from sand bed forms to brain patterns, and yet their understanding still presents fundamental scientific challenges. The reader will learn here, in particular, about the current state-of-the art and new results in: Nonlinear water waves: resonance, solitons, focusing, Bose-Einstein condensation, as well as and their relevance for the sea environment (sea-wind interaction, sand bed forms, fiber clustering) Pattern formation in non-equilibrium media: soap films, chimera patterns in oscillating media, viscoelastic Couette-Taylor flow, flow in the wake behind a heated cylinder, other pattern formation. The editors and authors dedicate this book to the memory of Alexander Ezersky, Professor of Fluid Mechanics at the University of Caen Normandie (France) from September 2007 to July 2016. Before 2007, he had served as a Senior Scientist at the Institute of Applied Physics of the Russian Academy of Sciences in Nizhny Novgorod (Russia). The chapters have been written by leading scientists in Nonlinear Physics, and the topics chosen so as to cover all the fields to which Prof. Ezersky himself contributed, by means of experimental, theoretical and numerical approaches. The volume will appeal to advanced students and researchers studying nonlinear waves and pattern dynamics, as well as other scientists interested in their applications in various natural media.
Download or read book An Introduction to SolidWorks Flow Simulation 2014 written by John Matsson and published by SDC Publications. This book was released on 2014-07-07 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SolidWorks Flow Simulation 2014 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.
Download or read book An Introduction to SolidWorks Flow Simulation 2010 written by John E. Matsson and published by SDC Publications. This book was released on 2010-09-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SolidWorks Flow Simulation 2010 takes the reader through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The twelve chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.
Download or read book Heart Mechanics written by El-Sayed H. Ibrahim and published by CRC Press. This book was released on 2017-09-19 with total page 1267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on research and clinical trials, this book details the latest research in magnetic resonance imaging (MRI) tagging technology related to heart mechanics. It covers clinical applications and examines future trends, providing a guide for future uses of MRI technology for studying heart mechanics.
Download or read book Bioreactors for Tissue Engineering written by Julian Chaudhuri and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time in a single volume, the design, characterisation and operation of the bioreactor system in which the tissue is grown is detailed. Bioreactors for Tissue Engineering presents an overall picture of the current state of knowledge in the engineering of bioreactors for several tissue types (bone, cartilage, vascular), addresses the issue of mechanical conditioning of the tissue, and describes the use of techniques such as MRI for monitoring tissue growth. This unique volume is dedicated to the fundamentals and application of bioreactor technology to tissue engineering products. Not only will it appeal to graduate students and experienced researchers in tissue engineering and regenerative medicine, but also to tissue engineers and culture technologists, academic and industrial chemical engineers, biochemical engineers and cell biologists who wish to understand the criteria used to design and develop novel systems for tissue growth in vitro.
Download or read book Heart s Vortex written by Ares Pasipoularides and published by PMPH-USA. This book was released on 2009-11 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: This outstanding resource provides a comprehensive guide to intracardiac blood flow phenomena and cardiac hemodynamics, including the developmental history, theoretical frameworks, computational fluid dynamics, and practical applications for clinical cardiology, cardiac imaging and embryology. It is not a mere compilation of the most up-to-date scientific data and relevant concepts. Rather, it is an integrated educational means to developing pluridisciplinary background, knowledge, and understanding. Such understanding allows an appreciation of the crucial, albeit heretofore generally unappreciated, importance of intracardiac blood flow phenomena in a host of multifaceted functional and morphogenetic cardiac adaptations. The book includes over 400 figures, which were prepared by the author and form a vital part of the pedagogy. It is organized in three parts. Part I, Fundamentals of Intracardiac Flows and Their Measurement, provides comprehensive background from many disciplines that are necessary for a deep and broad understanding and appreciation of intracardiac blood flow phenomena. Such indispensable background spans several chapters and covers necessary mathematics, a brief history of the evolution of ideas and methodological approaches that are relevant to cardiac fluid dynamics and imaging, a qualitative introduction to fluid dynamic stability theory, chapters on physics and fluid dynamics of unsteady blood flows and an intuitive introduction to various kinds of relevant vortical fluid motions. Part II, Visualization of Intracardiac Blood Flows: Methodologies, Frameworks and Insights, is devoted to pluridisciplinary approaches to the visualization of intracardiac blood flows. It encompasses chapters on 3-D real-time and "live 3-D" echocardiography and Doppler echocardiography, CT tomographic scanning modalities, including multidetector spiral/helical dataset acquisitions, MRI and cardiac MRA, including phase contrast velocity mapping (PCVM), etc. An entire chapter is devoted to the understanding of post processing exploration techniques and the display of tomographic data, including "slice-and-dice" 3-D techniques and cine-MRI. Part II also encompasses an intuitive introduction to CFD as it pertains to intracardiac blood flow simulations, followed--in separate chapters--by conceptually rich treatments of the computational fluid dynamics of ejection and of diastolic filling. An entire chapter is devoted to fluid dynamic epigenetic factors in cardiogenesis and pre- and postnatal cardiac remodeling, and another to clinical and basic science perspectives, and their implications for emerging research frontiers. Part III contains an Appendix presenting technical aspects of the method of predetermined boundary motion, "PBM," developed at Duke University by the author and his collaborators.
Download or read book Computational Fluid Dynamics written by and published by . This book was released on 1992 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
