Download or read book Vision Guidance Controller for an Unmanned Aerial Vehicle written by Mark T. Watson and published by . This book was released on 1998-12-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of Unmanned Aerial Vehicles (UAVs) in modern military operations for reconnaissance and other missions continues to grow. UAV systems using remote control guidance are limited in range and subject to Electronic Warfare concerns. Guidance Systems using only Global Positioning Service (GPS) or an Inertial Navigation System (INS) are limited to a pre-programmed route of flight. A vision guidance system that can control the UAV over an arbitrary course is not subject to these limitations. This thesis uses classical control methods to develop and test an autonomous vision controller for the FOG-R UAV (FROG). First, a computer model of the camera output for a flight that tracks a river is made to develop the controller and to test it in nonlinear simulation. Finally, the complete system is flight tested on the FROG UAV. The design and test equipment include a highly modified FOG-R UAV from the U.S. Army, the MATRIXx Product Family of software tools developed by Integrated Systems, Inc., and a Ground Station built at NPS from commercially available computer and communication equipment.
Download or read book An Onboard Vision System for Unmanned Aerial Vehicle Guidance written by Barrett Bruce Edwards and published by . This book was released on 2010 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The viability of small Unmanned Aerial Vehicles (UAVs) as a stable platform for specific application use has been significantly advanced in recent years. Initial focus of lightweight UAV development was to create a craft capable of stable and controllable flight. This is largely a solved problem. Currently, the field has progressed to the point that unmanned aircraft can be carried in a backpack, launched by hand, weigh only a few pounds and be capable of navigating through unrestricted airspace.
Download or read book Engineering UAS Applications Sensor Fusion Machine Vision and Mission Management written by Jesús Garcia and published by Artech House. This book was released on 2023-07-31 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aerial systems (UAS) have evolved rapidly in recent years thanks to advances in microelectromechanical components, navigation, perception, and artificial intelligence, allowing for a fast development of autonomy. This book presents general approaches to develop, test, and evaluate critical functions such as navigation, obstacle avoidance and perception, and the capacity to improve performance in real and simulated scenarios. It provides the practical knowledge to install, analyze and evaluate UAS solutions working in real systems; illustrates how to use and configure complete platforms and software tools; and reviews the main enabling technologies applied to develop UAS, possibilities and evaluation methodology. You will get the tools you need to evaluate navigation and obstacle avoidance functions, object detection, and planning and landing alternatives in simulated conditions. The book also provides helpful guidance on the integration of additional sensors (video, weather, meteorological) and communication networks to build IoT solutions. This is an important book for practitioners and researchers interested in integrating advanced techniques in the fields of AI, sensor fusion and mission management, and anyone interest in applying and testing advanced algorithms in UAS platforms.
Download or read book A Gimbal supported Mono Camera Relative Position Measurement System of a Visually Distinct Object for UAV Guidance written by Rostyk Svitelskyi and published by . This book was released on 2019 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes a vision-based system for measuring distance and bearing between an unmanned aerial vehicle (UAV) and a ground object. The system is built of a single camera, mounted on a gimbal, which stabilizes camera attitude. The novelty of this system is that it uses a single camera and tracks a single object on the ground, hence requiring less equipment compared to other types of vision-based navigation systems. Vision system data estimates are fed into the controller to stabilize aircraft on a circular orbit and to maintain fully automated flight, without GPS data. The system can be used as a backup in the case of GPS signal loss. In that case, the UAV will orbit a target until the signal is restored or manual input is received. We describe the hardware chosen to solve this problem and the image-processing and rectification algorithms that determine the position of the target. The position data is used to control the autopilot which was optimized for circling the target. The real flight test results for the system, installed on a fixed-wing UAV, are presented.
Download or read book Small Unmanned Aircraft written by Randal W. Beard and published by Princeton University Press. This book was released on 2012-02-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous unmanned air vehicles (UAVs) are critical to current and future military, civil, and commercial operations. Despite their importance, no previous textbook has accessibly introduced UAVs to students in the engineering, computer, and science disciplines--until now. Small Unmanned Aircraft provides a concise but comprehensive description of the key concepts and technologies underlying the dynamics, control, and guidance of fixed-wing unmanned aircraft, and enables all students with an introductory-level background in controls or robotics to enter this exciting and important area. The authors explore the essential underlying physics and sensors of UAV problems, including low-level autopilot for stability and higher-level autopilot functions of path planning. The textbook leads the student from rigid-body dynamics through aerodynamics, stability augmentation, and state estimation using onboard sensors, to maneuvering through obstacles. To facilitate understanding, the authors have replaced traditional homework assignments with a simulation project using the MATLAB/Simulink environment. Students begin by modeling rigid-body dynamics, then add aerodynamics and sensor models. They develop low-level autopilot code, extended Kalman filters for state estimation, path-following routines, and high-level path-planning algorithms. The final chapter of the book focuses on UAV guidance using machine vision. Designed for advanced undergraduate or graduate students in engineering or the sciences, this book offers a bridge to the aerodynamics and control of UAV flight.
Download or read book Imaging and Sensing for Unmanned Aircraft Systems written by Vania V. Estrela and published by Institution of Engineering and Technology. This book was released on 2020-02-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book set explores how sensors and computer vision technologies are used for the navigation, control, stability, reliability, guidance, fault detection, self-maintenance, strategic re-planning and reconfiguration of unmanned aircraft systems (UAS). Volume 1 concentrates on UAS control and performance methodologies including Computer Vision and Data Storage, Integrated Optical Flow for Detection and Avoidance Systems, Navigation and Intelligence, Modeling and Simulation, Multisensor Data Fusion, Vision in Micro-Aerial Vehicles (MAVs), Computer Vision in UAV using ROS, Security Aspects of UAV and Robot Operating System, Vision in Indoor and Outdoor Drones, Sensors and Computer Vision, and Small UAV for Persistent Surveillance. Volume 2 focuses on UAS deployment and applications including UAV-CPSs as a Testbed for New Technologies and a Primer to Industry 5.0, Human-Machine Interface Design, Open Source Software (OSS) and Hardware (OSH), Image Transmission in MIMO-OSTBC System, Image Database, Communications Requirements, Video Streaming, and Communications Links, Multispectral vs Hyperspectral Imaging, Aerial Imaging and Reconstruction of Infrastructures, Deep Learning as an Alternative to Super Resolution Imaging, and Quality of Experience (QoE) and Quality of Service (QoS).
Download or read book Guidance of Unmanned Aerial Vehicles written by Rafael Yanushevsky and published by CRC Press. This book was released on 2011-03-29 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an expert with more than 30 years of experience, Guidance of Unmanned Aerial Vehicles contains new analytical results, taken from the author's research, which can be used for analysis and design of unmanned aerial vehicles guidance and control systems. This book progresses from a clear elucidation of guidance laws and unmanned aerial veh
Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.
Download or read book State Estimation and Control for Low cost Unmanned Aerial Vehicles written by Chingiz Hajiyev and published by Springer. This book was released on 2015-06-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses state estimation and control procedures for a low-cost unmanned aerial vehicle (UAV). The authors consider the use of robust adaptive Kalman filter algorithms and demonstrate their advantages over the optimal Kalman filter in the context of the difficult and varied environments in which UAVs may be employed. Fault detection and isolation (FDI) and data fusion for UAV air-data systems are also investigated, and control algorithms, including the classical, optimal, and fuzzy controllers, are given for the UAV. The performance of different control methods is investigated and the results compared. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles covers all the important issues for designing a guidance, navigation and control (GNC) system of a low-cost UAV. It proposes significant new approaches that can be exploited by GNC system designers in the future and also reviews the current literature. The state estimation, control and FDI methods are illustrated by examples and MATLAB® simulations. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles will be of interest to both researchers in academia and professional engineers in the aerospace industry. Graduate students may also find it useful, and some sections are suitable for an undergraduate readership.
Download or read book Unmanned Aerial Vehicles written by Rogelio Lozano and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic tools required to obtain the dynamical models for aerial vehicles (in the Newtonian or Lagrangian approach). Several control laws are presented for mini-helicopters, quadrotors, mini-blimps, flapping-wing aerial vehicles, planes, etc. Finally, this book has two chapters devoted to embedded control systems and Kalman filters applied for aerial vehicles control and navigation. This book presents the state of the art in the area of UAVs. The aerodynamical models of different configurations are presented in detail as well as the control strategies which are validated in experimental platforms.
Download or read book Visual Guidance of Unmanned Aerial Manipulators written by Angel Santamaria-Navarro and published by Springer. This book was released on 2018-08-18 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers theoretical and practical aspects of the problem of autonomous guiding of unmanned aerial manipulators using visual information. For the estimation of the vehicle state (position, orientation, velocity, and acceleration), the authors propose a method that relies exclusively on the use of low-cost and highrate sensors together with low-complexity algorithms. This is particularly interesting for applications in which on board computation with low computation power is needed. Another relevant topic covered in this monograph is visual servoing. The authors present an uncalibrated visual servo scheme, capable of estimating at run time, the camera focal length from the observation of a tracked target. The monograph also covers several control techniques, which achieve a number of tasks, such as robot and arm positioning, improve stability and enhance robot arm motions. All methods discussed in this monograph are demonstrated in simulation and through real robot experimentation. The text is appropriate for readers interested in state estimation and control of aerial manipulators, and is a reference book for people who work in mobile robotics research in general.
Download or read book Handbook of Unmanned Aerial Vehicles written by Kimon P. Valavanis and published by Springer. This book was released on 2014-08-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Unmanned Aerial Vehicles is a reference text for the academic and research communities, industry, manufacturers, users, practitioners, Federal Government, Federal and State Agencies, the private sector, as well as all organizations that are and will be using unmanned aircraft in a wide spectrum of applications. The Handbook covers all aspects of UAVs, from design to logistics and ethical issues. It is also targeting the young investigator, the future inventor and entrepreneur by providing an overview and detailed information of the state-of-the-art as well as useful new concepts that may lead to innovative research. The contents of the Handbook include material that addresses the needs and ‘know how’ of all of the above sectors targeting a very diverse audience. The Handbook offers a unique and comprehensive treatise of everything one needs to know about unmanned aircrafts, from conception to operation, from technologies to business activities, users, OEMs, reference sources, conferences, publications, professional societies, etc. It should serve as a Thesaurus, an indispensable part of the library for everyone involved in this area. For the first time, contributions by the world’s top experts from academia, industry, government and the private sector, are brought together to provide unique perspectives on the current state-of-the-art in UAV, as well as future directions. The Handbook is intended for the expert/practitioner who seeks specific technical/business information, for the technically-oriented scientists and engineers, but also for the novice who wants to learn more about the status of UAV and UAV-related technologies. The Handbook is arranged in a user-friendly format, divided into main parts referring to: UAV Design Principles; UAV Fundamentals; UAV Sensors and Sensing Strategies; UAV Propulsion; UAV Control; UAV Communication Issues; UAV Architectures; UAV Health Management Issues; UAV Modeling, Simulation, Estimation and Identification; MAVs and Bio-Inspired UAVs; UAV Mission and Path Planning; UAV Autonomy; UAV Sense, Detect and Avoid Systems; Networked UAVs and UAV Swarms; UAV Integration into the National Airspace; UAV-Human Interfaces and Decision Support Systems; Human Factors and Training; UAV Logistics Support; UAV Applications; Social and Ethical Implications; The Future of UAVs. Each part is written by internationally renowned authors who are authorities in their respective fields. The contents of the Handbook supports its unique character as a thorough and comprehensive reference book directed to a diverse audience of technologists, businesses, users and potential users, managers and decision makers, novices and experts, who seek a holistic volume of information that is not only a technical treatise but also a source for answers to several questions on UAV manufacturers, users, major players in UAV research, costs, training required and logistics issues.
Download or read book Vision Based Tracking for Unmanned Aerial Vehicles written by and published by . This book was released on 2006 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents the design of a vision-based controller for an underactuated, unmanned aerial vehicle (UAV) equipped with a pan-tilt camera unit (PTCU) to achieve the objective of following a leader vehicle autonomously. The relative position and orientation information is obtained from the monocular camera utilizing homography-based techniques. The proposed controller, built upon Lyapunov design methods, achieves uniform ultimate bounded (UUB) tracking. As an extension, it is also demonstrated that the approach used in the development of the control strategy for the leaderfollower problem can be applied, with a few modifications, to the problem of trajectory tracking, where the desired trajectory is described as a sequence of images taken, for example, by the on-board camera during a previous flight.
Download or read book Quad Rotorcraft Control written by Luis Rodolfo García Carrillo and published by Springer Science & Business Media. This book was released on 2012-08-12 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quad Rotorcraft Control develops original control methods for the navigation and hovering flight of an autonomous mini-quad-rotor robotic helicopter. These methods use an imaging system and a combination of inertial and altitude sensors to localize and guide the movement of the unmanned aerial vehicle relative to its immediate environment. The history, classification and applications of UAVs are introduced, followed by a description of modelling techniques for quad-rotors and the experimental platform itself. A control strategy for the improvement of attitude stabilization in quad-rotors is then proposed and tested in real-time experiments. The strategy, based on the use low-cost components and with experimentally-established robustness, avoids drift in the UAV’s angular position by the addition of an internal control loop to each electronic speed controller ensuring that, during hovering flight, all four motors turn at almost the same speed. The quad-rotor’s Euler angles being very close to the origin, other sensors like GPS or image-sensing equipment can be incorporated to perform autonomous positioning or trajectory-tracking tasks. Two vision-based strategies, each designed to deal with a specific kind of mission, are introduced and separately tested. The first stabilizes the quad-rotor over a landing pad on the ground; it extracts the 3-dimensional position using homography estimation and derives translational velocity by optical flow calculation. The second combines colour-extraction and line-detection algorithms to control the quad-rotor’s 3-dimensional position and achieves forward velocity regulation during a road-following task. In order to estimate the translational-dynamical characteristics of the quad-rotor (relative position and translational velocity) as they evolve within a building or other unstructured, GPS-deprived environment, imaging, inertial and altitude sensors are combined in a state observer. The text give the reader a current view of the problems encountered in UAV control, specifically those relating to quad-rotor flying machines and it will interest researchers and graduate students working in that field. The vision-based control strategies presented help the reader to a better understanding of how an imaging system can be used to obtain the information required for performance of the hovering and navigation tasks ubiquitous in rotored UAV operation.
Download or read book Design of Unmanned Aerial Systems written by Mohammad H. Sadraey and published by John Wiley & Sons. This book was released on 2020-04-13 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the design and analysis of unmanned aircraft systems with a systems perspective Written for students and engineers who are new to the field of unmanned aerial vehicle design, this book teaches the many UAV design techniques being used today and demonstrates how to apply aeronautical science concepts to their design. Design of Unmanned Aerial Systems covers the design of UAVs in three sections—vehicle design, autopilot design, and ground systems design—in a way that allows readers to fully comprehend the science behind the subject so that they can then demonstrate creativity in the application of these concepts on their own. It teaches students and engineers all about: UAV classifications, design groups, design requirements, mission planning, conceptual design, detail design, and design procedures. It provides them with in-depth knowledge of ground stations, power systems, propulsion systems, automatic flight control systems, guidance systems, navigation systems, and launch and recovery systems. Students will also learn about payloads, manufacturing considerations, design challenges, flight software, microcontroller, and design examples. In addition, the book places major emphasis on the automatic flight control systems and autopilots. Provides design steps and procedures for each major component Presents several fully solved, step-by-step examples at component level Includes numerous UAV figures/images to emphasize the application of the concepts Describes real stories that stress the significance of safety in UAV design Offers various UAV configurations, geometries, and weight data to demonstrate the real-world applications and examples Covers a variety of design techniques/processes such that the designer has freedom and flexibility to satisfy the design requirements in several ways Features many end-of-chapter problems for readers to practice Design of Unmanned Aerial Systems is an excellent text for courses in the design of unmanned aerial vehicles at both the upper division undergraduate and beginning graduate levels.
Download or read book Autonomous Flying Robots written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2010-09-15 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advance in robotics has boosted the application of autonomous vehicles to perform tedious and risky tasks or to be cost-effective substitutes for their - man counterparts. Based on their working environment, a rough classi cation of the autonomous vehicles would include unmanned aerial vehicles (UAVs), - manned ground vehicles (UGVs), autonomous underwater vehicles (AUVs), and autonomous surface vehicles (ASVs). UAVs, UGVs, AUVs, and ASVs are called UVs (unmanned vehicles) nowadays. In recent decades, the development of - manned autonomous vehicles have been of great interest, and different kinds of autonomous vehicles have been studied and developed all over the world. In part- ular, UAVs have many applications in emergency situations; humans often cannot come close to a dangerous natural disaster such as an earthquake, a ood, an active volcano, or a nuclear disaster. Since the development of the rst UAVs, research efforts have been focused on military applications. Recently, however, demand has arisen for UAVs such as aero-robotsand ying robotsthat can be used in emergency situations and in industrial applications. Among the wide variety of UAVs that have been developed, small-scale HUAVs (helicopter-based UAVs) have the ability to take off and land vertically as well as the ability to cruise in ight, but their most importantcapability is hovering. Hoveringat a point enables us to make more eff- tive observations of a target. Furthermore, small-scale HUAVs offer the advantages of low cost and easy operation.
Download or read book Vision based Localization and Guidance for Unmanned Aerial Vehicles written by Gianpaolo Conte and published by . This book was released on 2009 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
