Download or read book Autonomous Flying Robots written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2010-09-15 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advance in robotics has boosted the application of autonomous vehicles to perform tedious and risky tasks or to be cost-effective substitutes for their - man counterparts. Based on their working environment, a rough classi cation of the autonomous vehicles would include unmanned aerial vehicles (UAVs), - manned ground vehicles (UGVs), autonomous underwater vehicles (AUVs), and autonomous surface vehicles (ASVs). UAVs, UGVs, AUVs, and ASVs are called UVs (unmanned vehicles) nowadays. In recent decades, the development of - manned autonomous vehicles have been of great interest, and different kinds of autonomous vehicles have been studied and developed all over the world. In part- ular, UAVs have many applications in emergency situations; humans often cannot come close to a dangerous natural disaster such as an earthquake, a ood, an active volcano, or a nuclear disaster. Since the development of the rst UAVs, research efforts have been focused on military applications. Recently, however, demand has arisen for UAVs such as aero-robotsand ying robotsthat can be used in emergency situations and in industrial applications. Among the wide variety of UAVs that have been developed, small-scale HUAVs (helicopter-based UAVs) have the ability to take off and land vertically as well as the ability to cruise in ight, but their most importantcapability is hovering. Hoveringat a point enables us to make more eff- tive observations of a target. Furthermore, small-scale HUAVs offer the advantages of low cost and easy operation.

Download or read book UAV Based Remote Sensing Volume 1 written by Felipe Gonzalez Toro and published by MDPI. This book was released on 2018-04-27 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "UAV-Based Remote Sensing" that was published in Sensors

Download or read book The DelFly written by G.C.H.E. de Croon and published by Springer. This book was released on 2015-11-26 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the topics most relevant to autonomously flying flapping wing robots: flapping-wing design, aerodynamics, and artificial intelligence. Readers can explore these topics in the context of the "Delfly", a flapping wing robot designed at Delft University in The Netherlands. How are tiny fruit flies able to lift their weight, avoid obstacles and predators, and find food or shelter? The first step in emulating this is the creation of a micro flapping wing robot that flies by itself. The challenges are considerable: the design and aerodynamics of flapping wings are still active areas of scientific research, whilst artificial intelligence is subject to extreme limitations deriving from the few sensors and minimal processing onboard. This book conveys the essential insights that lie behind success such as the DelFly Micro and the DelFly Explorer. The DelFly Micro, with its 3.07 grams and 10 cm wing span, is still the smallest flapping wing MAV in the world carrying a camera, whilst the DelFly Explorer is the world's first flapping wing MAV that is able to fly completely autonomously in unknown environments. The DelFly project started in 2005 and ever since has served as inspiration, not only to many scientific flapping wing studies, but also the design of flapping wing toys. The combination of introductions to relevant fields, practical insights and scientific experiments from the DelFly project make this book a must-read for all flapping wing enthusiasts, be they students, researchers, or engineers.

Download or read book Field and Service Robotics written by Luis Mejias and published by Springer. This book was released on 2014-07-15 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: FSR, the International Conference on Field and Service Robotics, is a robotics Symposium which has established over the past ten years the latest research and practical results towards the use of field and service robotics in the community with particular focus on proven technology. The first meeting was held in Canberra, Australia, in 1997. Since then the meeting has been held every two years in the pattern Asia, America, Europe. Field robots are non-factory robots, typically mobile, that operate in complex and dynamic environments; on the ground (of earth or planets), under the ground, underwater, in the air or in space. Service robots are those that work closely with humans to help them with their lives. This book present the results of the ninth edition of Field and Service Robotics, FSR13, held in Brisbane, Australia on 9th-11th December 2013. The conference provided a forum for researchers, professionals and robot manufactures to exchange up-to-date technical knowledge and experience. This book offers a collection of a broad range of topics including: Underwater Robots and Systems, Unmanned Aerial Vehicles technologies and applications, Agriculture, Space, Search and Rescue and Domestic Robotics, Robotic Vision, Mapping and Recognition.

Download or read book Robotics Research written by Antonio Bicchi and published by Springer. This book was released on 2017-07-25 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the seventeenth edition of "Robotics Research" ISRR15, offering a collection of a broad range of topics in robotics. The content of the contributions provides a wide coverage of the current state of robotics research.: the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.

Download or read book Introduction to Autonomous Mobile Robots second edition written by Roland Siegwart and published by MIT Press. This book was released on 2011-02-18 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive introduction to all aspects of mobile robotics, from algorithms to mechanisms. Mobile robots range from the Mars Pathfinder mission's teleoperated Sojourner to the cleaning robots in the Paris Metro. This text offers students and other interested readers an introduction to the fundamentals of mobile robotics, spanning the mechanical, motor, sensory, perceptual, and cognitive layers the field comprises. The text focuses on mobility itself, offering an overview of the mechanisms that allow a mobile robot to move through a real world environment to perform its tasks, including locomotion, sensing, localization, and motion planning. It synthesizes material from such fields as kinematics, control theory, signal analysis, computer vision, information theory, artificial intelligence, and probability theory. The book presents the techniques and technology that enable mobility in a series of interacting modules. Each chapter treats a different aspect of mobility, as the book moves from low-level to high-level details. It covers all aspects of mobile robotics, including software and hardware design considerations, related technologies, and algorithmic techniques. This second edition has been revised and updated throughout, with 130 pages of new material on such topics as locomotion, perception, localization, and planning and navigation. Problem sets have been added at the end of each chapter. Bringing together all aspects of mobile robotics into one volume, Introduction to Autonomous Mobile Robots can serve as a textbook or a working tool for beginning practitioners. Curriculum developed by Dr. Robert King, Colorado School of Mines, and Dr. James Conrad, University of North Carolina-Charlotte, to accompany the National Instruments LabVIEW Robotics Starter Kit, are available. Included are 13 (6 by Dr. King and 7 by Dr. Conrad) laboratory exercises for using the LabVIEW Robotics Starter Kit to teach mobile robotics concepts.

Download or read book Experimental Robotics IX written by Marcelo H. Ang and published by Springer Science & Business Media. This book was released on 2006-02-09 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Experimental Robotics (ISER) is a series of bi-annual meetings which are organized in a rotating fashion around North America, Europe and Asia/Oceania. The goal of ISER is to provide a forum for research in robotics that focuses on novelty of theoretical contributions validated by experimental results. The meetings are conceived to bring together, in a small group setting, researchers from around the world who are in the forefront of experimental robotics research. This unique reference presents the latest advances across the various fields of robotics, with ideas that are not only conceived conceptually but also verified experimentally. It collects contributions on the current developments and new directions in the field of experimental robotics, which are based on the papers presented at the Ninth ISER held in Singapore.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1988 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quad Rotorcraft Control written by Luis Rodolfo García Carrillo and published by Springer Science & Business Media. This book was released on 2012-08-12 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quad Rotorcraft Control develops original control methods for the navigation and hovering flight of an autonomous mini-quad-rotor robotic helicopter. These methods use an imaging system and a combination of inertial and altitude sensors to localize and guide the movement of the unmanned aerial vehicle relative to its immediate environment. The history, classification and applications of UAVs are introduced, followed by a description of modelling techniques for quad-rotors and the experimental platform itself. A control strategy for the improvement of attitude stabilization in quad-rotors is then proposed and tested in real-time experiments. The strategy, based on the use low-cost components and with experimentally-established robustness, avoids drift in the UAV’s angular position by the addition of an internal control loop to each electronic speed controller ensuring that, during hovering flight, all four motors turn at almost the same speed. The quad-rotor’s Euler angles being very close to the origin, other sensors like GPS or image-sensing equipment can be incorporated to perform autonomous positioning or trajectory-tracking tasks. Two vision-based strategies, each designed to deal with a specific kind of mission, are introduced and separately tested. The first stabilizes the quad-rotor over a landing pad on the ground; it extracts the 3-dimensional position using homography estimation and derives translational velocity by optical flow calculation. The second combines colour-extraction and line-detection algorithms to control the quad-rotor’s 3-dimensional position and achieves forward velocity regulation during a road-following task. In order to estimate the translational-dynamical characteristics of the quad-rotor (relative position and translational velocity) as they evolve within a building or other unstructured, GPS-deprived environment, imaging, inertial and altitude sensors are combined in a state observer. The text give the reader a current view of the problems encountered in UAV control, specifically those relating to quad-rotor flying machines and it will interest researchers and graduate students working in that field. The vision-based control strategies presented help the reader to a better understanding of how an imaging system can be used to obtain the information required for performance of the hovering and navigation tasks ubiquitous in rotored UAV operation.

Download or read book UAV Sensors for Environmental Monitoring written by Felipe Gonzalez Toro and published by MDPI. This book was released on 2018-03-05 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "UAV Sensors for Environmental Monitoring" that was published in Sensors

Download or read book Advances in Embedded Computer Vision written by Branislav Kisačanin and published by Springer. This book was released on 2014-11-26 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illuminating collection offers a fresh look at the very latest advances in the field of embedded computer vision. Emerging areas covered by this comprehensive text/reference include the embedded realization of 3D vision technologies for a variety of applications, such as stereo cameras on mobile devices. Recent trends towards the development of small unmanned aerial vehicles (UAVs) with embedded image and video processing algorithms are also examined. Topics and features: discusses in detail three major success stories – the development of the optical mouse, vision for consumer robotics, and vision for automotive safety; reviews state-of-the-art research on embedded 3D vision, UAVs, automotive vision, mobile vision apps, and augmented reality; examines the potential of embedded computer vision in such cutting-edge areas as the Internet of Things, the mining of large data streams, and in computational sensing; describes historical successes, current implementations, and future challenges.

Download or read book Aeronautics and Astronautics written by Max Mulder and published by BoD – Books on Demand. This book was released on 2011-09-12 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its first centennial, aerospace has matured from a pioneering activity to an indispensable enabler of our daily life activities. In the next twenty to thirty years, aerospace will face a tremendous challenge - the development of flying objects that do not depend on fossil fuels. The twenty-three chapters in this book capture some of the new technologies and methods that are currently being developed to enable sustainable air transport and space flight. It clearly illustrates the multi-disciplinary character of aerospace engineering, and the fact that the challenges of air transportation and space missions continue to call for the most innovative solutions and daring concepts.

Download or read book UAV or Drones for Remote Sensing Applications written by Felipe Gonzalez Toro and published by MDPI. This book was released on 2018-11-23 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "UAV or Drones for Remote Sensing Applications" that was published in Sensors

Download or read book Planetary Rovers written by Alex Ellery and published by Springer. This book was released on 2015-12-30 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: This will be the only book on planetary rover development covering all aspects relevant to the design of systems

Download or read book Computer Vision in Vehicle Technology written by Antonio M. López and published by John Wiley & Sons. This book was released on 2017-02-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified view of the use of computer vision technology for different types of vehicles Computer Vision in Vehicle Technology focuses on computer vision as on-board technology, bringing together fields of research where computer vision is progressively penetrating: the automotive sector, unmanned aerial and underwater vehicles. It also serves as a reference for researchers of current developments and challenges in areas of the application of computer vision, involving vehicles such as advanced driver assistance (pedestrian detection, lane departure warning, traffic sign recognition), autonomous driving and robot navigation (with visual simultaneous localization and mapping) or unmanned aerial vehicles (obstacle avoidance, landscape classification and mapping, fire risk assessment). The overall role of computer vision for the navigation of different vehicles, as well as technology to address on-board applications, is analysed. Key features: Presents the latest advances in the field of computer vision and vehicle technologies in a highly informative and understandable way, including the basic mathematics for each problem. Provides a comprehensive summary of the state of the art computer vision techniques in vehicles from the navigation and the addressable applications points of view. Offers a detailed description of the open challenges and business opportunities for the immediate future in the field of vision based vehicle technologies. This is essential reading for computer vision researchers, as well as engineers working in vehicle technologies, and students of computer vision.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Visual Sensors written by Oscar Reinoso and published by MDPI. This book was released on 2020-03-27 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visual sensors are able to capture a large quantity of information from the environment around them. A wide variety of visual systems can be found, from the classical monocular systems to omnidirectional, RGB-D, and more sophisticated 3D systems. Every configuration presents some specific characteristics that make them useful for solving different problems. Their range of applications is wide and varied, including robotics, industry, agriculture, quality control, visual inspection, surveillance, autonomous driving, and navigation aid systems. In this book, several problems that employ visual sensors are presented. Among them, we highlight visual SLAM, image retrieval, manipulation, calibration, object recognition, navigation, etc.