Download or read book Fluid Flow Measurement written by Paul J. LaNasa and published by Butterworth-Heinemann. This book was released on 2014-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications
Download or read book Techniques and Topics in Flow Measurement written by Frank E. Jones and published by CRC Press. This book was released on 2020-09-11 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques and Topics in Flow Measurement covers the applications and techniques of flow measurement. This definitive book provides guidelines for choosing appropriate techniques and assuring valid measurements as well as describes methods for treatment of calibration data in fluid flow under various conditions. The book also covers three systems of units: the SI system, the English Absolute Dimensional system, and the English Engineering system. Commonly used - and often misused - variables such as force, weight, and pressure are defined, and the relationships between the systems for these common variables are summarized. One of the many unique features of Techniques and Topics in Flow Measurement is the number of ready-to-use tables included throughout the text. Tables are provided for such commonly encountered variables as the saturation vapor pressure of water; the composition of dry air; the compressibility factor for air; air-free and air-saturated water density; viscosity of dry air, nitrogen, and other gases; and specific heat/specific volume ratios for dry air, water vapor, and moist air. Another unique feature of this book is the number of highly relevant examples. The author includes examples/exercises that demonstrate applications for density calculations; water vapor mixing ratio determination; gas viscosity interpolation; NIST guideline applications; buoyancy corrections; and more.
Download or read book Flowmeters Flow Measurement written by P. Chattopadhyay and published by Asian Books Private Limited. This book was released on 2006 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: It Gives Details Of All Kinds Of Flowmeters Through Operating Principle And Discusses Their Applications Plus Advantages And Disadvantages. Besides, It Presents The Techniques Of Installation Of Individual Flowmeters And Flow Measurement Along With Numerical Calculations. Selection Crieteria And Flowmeter Selection Have Been Nicely Presented. Chapter-7 Discusses Proprietary Flowmeter - Their Specification, Operating Principle & Design Data. A Discussion Of British Standard Bs7405 Is An Added Bonaza.Presentation Is Good. Language Is Simple. Content Highlights : - Preface # Flowmeters And Flow Measurement In Closed Pipes # Flow Measurement In Open Channels # Numerical Examples # Principles Of Flowmeter Selections # Selection Crieteria # Flowmeter Selection # Specification Of Proprietary Flowmeter # Installation & Maintenance # Miscellaneous # Important Tips # Appendix # Index
Download or read book Flow Measurement written by Bela G. Liptak and published by CRC Press. This book was released on 2020-06-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully illustrated with diagrams, tables, and formulas, Flow Measurement covers virtually every type of flow meter in use today. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Viscosity of Liquids written by Dabir S. Viswanath and published by Springer Science & Business Media. This book was released on 2007-03-31 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in that it brings together published viscosity data, experimental methods, theoretical, correlation and predictive procedures in a single volume. The readers will get a better understanding of why various methods are used for measuring viscosity of different types of liquids and why an experimental method is dependent on fluid characteristics, such as Newtonian or non-Newtonian fluids.
Download or read book College Physics for AP Courses written by Irna Lyublinskaya and published by . This book was released on 2015-07-31 with total page 1665 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This introductory, algebra-based, two-semester college physics book is grounded with real-world examples, illustrations, and explanations to help students grasp key, fundamental physics concepts. ... This online, fully editable and customizable title includes learning objectives, concept questions, links to labs and simulations, and ample practice opportunities to solve traditional physics application problems."--Website of book.
Download or read book Techniques and Topics in Flow Measurement written by Frank E. Jones and published by CRC Press. This book was released on 1995-08-08 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques and Topics in Flow Measurement covers the applications and techniques of flow measurement. This definitive book provides guidelines for choosing appropriate techniques and assuring valid measurements as well as describes methods for treatment of calibration data in fluid flow under various conditions. The book also covers three systems of units: the SI system, the English Absolute Dimensional system, and the English Engineering system. Commonly used - and often misused - variables such as force, weight, and pressure are defined, and the relationships between the systems for these common variables are summarized. One of the many unique features of Techniques and Topics in Flow Measurement is the number of ready-to-use tables included throughout the text. Tables are provided for such commonly encountered variables as the saturation vapor pressure of water; the composition of dry air; the compressibility factor for air; air-free and air-saturated water density; viscosity of dry air, nitrogen, and other gases; and specific heat/specific volume ratios for dry air, water vapor, and moist air. Another unique feature of this book is the number of highly relevant examples. The author includes examples/exercises that demonstrate applications for density calculations; water vapor mixing ratio determination; gas viscosity interpolation; NIST guideline applications; buoyancy corrections; and more.
Download or read book Food Texture and Viscosity Concept and Measurement written by Malcolm C. Bourne and published by Elsevier. This book was released on 2014-06-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Science and Technology: A Series of Monographs: Food Texture and Viscosity: Concept and Measurement focuses on the texture and viscosity of food and how these properties are measured. The publication first elaborates on texture, viscosity, and food, body-texture interactions, and principles of objective texture measurement. Topics include area and volume measuring instruments, chemical analysis, multiple variable instruments, soothing effect of mastication, reasons for masticating food, rheology and texture, and the rate of compression between the teeth. The book then examines the practice of objective texture measurement and viscosity and consistency, including the general equation for viscosity, methods for measuring viscosity, factors affecting viscosity, tensile testers, distance measuring measurements, and shear testing. The manuscript takes a look at the selection of a suitable test procedure and sensory methods of texture and viscosity measurement. Discussions focus on nonoral methods of sensory measurement; correlations between subjective and objective measurements; variations on the texture profile technique; and importance of sensory evaluation. The publication is a vital source of information for food experts and researchers interested in food texture and viscosity.
Download or read book Schaum s Outline of Fluid Mechanics and Hydraulics 4th Edition written by Cheng Liu and published by McGraw Hill Professional. This book was released on 2013-11-08 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study faster, learn better, and get top grades! Here is the ideal review for your fluid mechanics and hydraulics course More than 40 million students have trusted Schaum’s Outlines for their expert knowledge and helpful solved problems. Written by a renowned expert in this field, Schaum's Outline of Fluid Mechanics and Hydraulics covers what you need to know for your course and, more important, your exams. Step-by-step, the author walks you through coming up with solutions to exercises in this topic. Features: 622 fully solved problems Links to online instruction videos Practical examples of proofs of theorems and derivations of formulas Chapters on fluid statics and the flow of compressible fluids Detailed explanations of free-body analysis, vector diagrams, the principles of work and energy and impulse-momentum, and Newton’s laws of motion Helpful material for the following courses: Introduction to Fluid Dynamics; Introduction to Hydraulics; Fluid Mechanics; Statics and Mechanics of Materials
Download or read book Introduction to Fluid Mechanics written by Robert W. Fox and published by John Wiley & Sons. This book was released on 2008 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the bestselling books in the field, Introduction to Fluid Mechanics continues to provide readers with a balanced and comprehensive approach to mastering critical concepts. The new seventh edition once again incorporates a proven problem-solving methodology that will help them develop an orderly plan to finding the right solution. It starts with basic equations, then clearly states assumptions, and finally, relates results to expected physical behavior. Many of the steps involved in analysis are simplified by using Excel.
Download or read book Viscosity and Flow Measurement written by John R. Van Wazer and published by . This book was released on 1963 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Measurement Handbook written by R. C. Baker and published by Cambridge University Press. This book was released on 2000-05-29 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical, comprehensive advice on the design, operation, and performance of flowmeters.
Download or read book Capnography written by J. S. Gravenstein and published by Cambridge University Press. This book was released on 2011-03-17 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years capnography has gained a foothold in the medical field and is fast becoming a standard of care in anaesthesiology and critical care medicine. In addition, newer applications have emerged which have expanded the utility of capnographs in a number of medical disciplines. This new edition of the definitive text on capnography reviews every aspect of this valuable diagnostic technique. An introductory section summarises the basic physiology of carbon dioxide generation and transport in the body. A technical section describes how the instruments work, and a comprehensive clinical section reviews the use of capnography to diagnose a wide range of clinical disorders. Edited by the world experts in the technique, and with over 40 specialist contributors, Capnography, second edition, is the most comprehensive review available on the application of capnography in health care.
Download or read book Flow Measurement Engineering Handbook written by Richard W. Miller and published by McGraw-Hill Companies. This book was released on 1983 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Viscometry for Liquids written by S. V. Gupta and published by Springer Science & Business Media. This book was released on 2014-03-17 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for scientists involved in the calibration of viscometers. A detailed description for stepping up procedures to establish the viscosity scale and obtaining sets of master viscometers is given in the book. Uncertainty considerations for standard oils of known viscosity are presented. The modern viscometers based on principles of tuning fork, ultrasonic, PZT, plate waves, Love waves, micro-cantilever and vibration of optical fiber are discussed to inspire the reader to further research and to generate improved versions. The primary standard for viscosity is pure water. Measurements of its viscosity with accuracy/uncertainty achieved are described. The principles of rotational and oscillation viscometers are explained to enhance the knowledge in calibration work. Devices used for specific materials and viscosity in non SI units are discussed with respect to the need to correlate viscosity values obtained by various devices. The description of commercial viscometers meets the needs of the user.
Download or read book Flow Measurement for Engineers and Scientists written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2022-01-27 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses instrumentation and experimental methods for obtaining detailed information on the structure of various types of flows as well as standard process flow instrumentation suitable for industrial control applications. It assists research-oriented and process engineering personnel.
Download or read book The Rheology Handbook written by Thomas G. Mezger and published by Vincentz Network GmbH & Co KG. This book was released on 2006 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
