Download or read book Viscoplastic Flow in Solids Produced by Shear Banding written by Ryszard B. Pecherski and published by John Wiley & Sons. This book was released on 2022-05-26 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: VISCOPLASTIC FLOW IN SOLIDS PRODUCED BYSHEAR BANDING A complete overview of the topic of viscoplastic flow in solids produced by shear banding This book presents novel ideas about inelastic deformation and failure of solids in a clear, concise manner. It exposes readers to information that will allow them to acquire the competence and ability to deal with up-to-date manufacturing and failure processes. It also portrays a new understanding of deformation processes. Finally, shear banding’s typical mechanism becomes the active cause of viscoplastic flow and not the passive effect. Viscoplastic Flow in Solids Produced by Shear Banding begins by discussing the new physical model of multilevel hierarchy and the evolution of micro-shear bands. In conclusion, it examines the difficulties of applying a direct multiscale integration scheme and extends the representative volume element (RVE) concept using the general theory of the singular surfaces of the microscopic velocity field sweeping out the RVE. This book reveals a new formulation of the shear strain rate generated by the consecutive systems of shear bands in the workflow integration approach. This book: Presents fresh ideas about inelastic deformation and failure of materials Provides readers with the ability to deal with up-to-date manufacturing and failure processes Sheds light on the interdisciplinary view of deformation processes in solids Viscoplastic Flow in Solids Produced by Shear Banding will appeal to researchers studying physical foundations of inelastic behaviour and failure of solid materials, dealing with analysis and numerical simulations of manufacturing forming processes. It is also an excellent resource for graduate and postgraduate students of material science and mechanical engineering faculties.
Download or read book Damage Mechanics and Micromechanics of Localized Fracture Phenomena in Inelastic Solids written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2012-01-29 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book resulted from a series of lecture notes presented in CISM, Udine in July 7 -11, 2008. The papers inform about recent advances in continuum damage mechanics for both metals and metal matrix composites as well as the micromechanics of localization in inelastic solids. Also many of the different constitutive damage models that have recently appeared in the literature and the different approaches to this topic are presented, making them easily accessible to researchers and graduate students in civil engineering, mechanical engineering, engineering mechanics, aerospace engineering, and material science.
Download or read book Current Advances in Mechanical Design Production IV written by Y. H. Kabil and published by Elsevier. This book was released on 2017-05-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of the state of the art in mechanical design and production. Both basic and applied research papers highlight recent trends, techniques and case studies in two major fields: analysis and design of mechanical systems and components; production and industrial engineering. This volume also includes all the invited keynote lectures presented at the conference. Contains 73 papers.
Download or read book Transactions of the Army Conference on Applied Mathematics and Computing written by and published by . This book was released on 1991 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Localization and Fracture Phenomena in Inelastic Solids written by Piotr Perzyna and published by Springer. This book was released on 2014-05-04 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains the discussion of some important aspects of localization and fracture phenomena in inelastic solids (single crystals, polycrystalline solids and geological materials). Physical and experimental foundations of crystal plasticity are given. Constitutive modelling of dissipative solids for description of localization and fracture is presented. Various regularization methods for solution of the initial-boundary value problems are outlined. Numerical solutions based on finite element method of practicular evolution problems with localization of plastic deformation are considered.
Download or read book Semi Solid Processing of Alloys and Composites X written by Gerhard Hirt and published by Trans Tech Publications Ltd. This book was released on 2008-07-07 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume is dedicated to the science and technology of the semi-solid processing of metals. Since the recognition of the possibility of manipulating metals in the semi-solid state, during the seventies, this fascinating technology has experienced dynamic development and has led to a whole family of new production processes, new equipment and industrial applications. In order to exploit fully the technical and economic potential of these new ideas, it is important to achieve a better understanding of the microstructural development and flow behavior in order to improve material and process modelling as well as process control.
Download or read book Large Plastic Deformations Fundamental Aspects and Applications to Metal Forming written by J.L. Raphanel and published by Routledge. This book was released on 2021-09-17 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers topics involving large plastic deformation of metallic materials. These proceedings offer an overview of the synergism achieved by combining microstructural characterization and understanding, mechanical modelling and experiments, numerical analysis and computation.
Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Adiabatic shear localization / Y. Bai and B. Dodd. 1992. 1st ed.
Download or read book Computational Methods for Predicting Material Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 2014-06-28 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this book deal with computational methods for predicting material processing defects. Using recent advances in finite strain plasticity and viscoplasticity, damage modelling, bifurcation and instability theory, fracture mechanics and computer numerical techniques, new approaches to mechanical defect analysis are proposed. Appropriate methods for explaining and avoiding the defects leading to fracture, high porosity, strain localization or undesirable geometrical imperfections are presented. In addition, some papers are devoted to new formulations and new calculation algorithms to be used for solving the forming problems. Finally, two papers deal with physical description of defects occurring in forming and cutting operations, focusing on the academic and practical interest of these topics.This is the first book to deal with the prediction of defects occurring in material forming processes; it contains much of interest from both a theoretical and a practical viewpoint.
Download or read book The Physics and Mathematics of Adiabatic Shear Bands written by T. W. Wright and published by Cambridge University Press. This book was released on 2002-07-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a research monograph on the material instability known as adiabatic shear banding which often occurs in a plastically deforming material as it undergoes rapid shearing. Plastic deformation generates heat, which eventually softens most materials with continued straining, a process which is usually unstable. In this case the instability results in thin regions of highly deformed material, which are often the sites of further damage and complete failure. The main body of the book examines a series of one-dimensional problems of increasing complexity. In this way a comprehensive and quantitative picture of the complete phenomena is built up. Particular care is taken to use well established asymptotic techniques to find simple, but universal, analytic expressions or scaling laws that encapsulate various aspects of the dynamic formation and the final morphology of shear bands. A fully developed mechanics of shear is just beginning to emerge as a major companion to fracture mechanics, this book may speed the process along.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research in Progress written by and published by . This book was released on 1991 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials written by André Pineau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Download or read book Plastic Flow and Creep written by Hussein M. Zbib and published by American Society of Mechanical Engineers. This book was released on 1992 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Instabilities written by Hussein M. Zbib and published by . This book was released on 1992 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Symposium on Material Instabilities was held at the University of Missouri-Rolla in October 1991 in conjunction with the 22nd Midwestern Mechanics Conference. The papers are arranged in three groups theoretical, numerical and experimental with special emphasis on the shear banding phenomenon in single crystals, polycrystals, clays and granular materials.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics. Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design. The eight tasks are: The automatic solution of mathematical models Effective numerical schemes for fluid flows The development of an effective mesh-free numerical solution method The development of numerical procedures for multiphysics problems The development of numerical procedures for multiscale problems The modelling of uncertainties The analysis of complete life cycles of systems Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features Bridges the gap between academic researchers and practitioners in industry Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Thermal Effects on Structures and Materials written by American Society of Mechanical Engineers. Winter Annual Meeting and published by American Society of Civil Engineers. This book was released on 1990 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
