Download or read book Vibration with Control written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are becoming increasingly aware of the problems caused by vibration in engineering design, particularly in the areas of structural health monitoring and smart structures. Vibration is a constant problem as it can impair performance and lead to fatigue, damage and the failure of a structure. Control of vibration is a key factor in preventing such detrimental results. This book presents a homogenous treatment of vibration by including those factors from control that are relevant to modern vibration analysis, design and measurement. Vibration and control are established on a firm mathematical basis and the disciplines of vibration, control, linear algebra, matrix computations, and applied functional analysis are connected. Key Features: Assimilates the discipline of contemporary structural vibration with active control Introduces the use of Matlab into the solution of vibration and vibration control problems Provides a unique blend of practical and theoretical developments Contains examples and problems along with a solutions manual and power point presentations Vibration with Control is an essential text for practitioners, researchers, and graduate students as it can be used as a reference text for its complex chapters and topics, or in a tutorial setting for those improving their knowledge of vibration and learning about control for the first time. Whether or not you are familiar with vibration and control, this book is an excellent introduction to this emerging and increasingly important engineering discipline.

Download or read book Vibration Control Engineering written by Ernesto Novillo and published by . This book was released on 2022 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Vibration with Control written by David Wagg and published by Springer. This book was released on 2014-11-03 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive discussion of nonlinear multi-modal structural vibration problems, and shows how vibration suppression can be applied to such systems by considering a sample set of relevant control techniques. It covers the basic principles of nonlinear vibrations that occur in flexible and/or adaptive structures, with an emphasis on engineering analysis and relevant control techniques. Understanding nonlinear vibrations is becoming increasingly important in a range of engineering applications, particularly in the design of flexible structures such as aircraft, satellites, bridges, and sports stadia. There is an increasing trend towards lighter structures, with increased slenderness, often made of new composite materials and requiring some form of deployment and/or active vibration control. There are also applications in the areas of robotics, mechatronics, micro electrical mechanical systems, non-destructive testing and related disciplines such as structural health monitoring. Two broader themes cut across these application areas: (i) vibration suppression – or active damping – and, (ii) adaptive structures and machines. In this expanded 2nd edition, revisions include: An additional section on passive vibration control, including nonlinear vibration mounts. A more in-depth description of semi-active control, including switching and continuous schemes for dampers and other semi-active systems. A complet e reworking of normal form analysis, which now includes new material on internal resonance, bifurcation of backbone curves and stability analysis of forced responses. Further analysis of the nonlinear dynamics of cables including internal resonance leading to whirling. Additional material on the vibration of systems with impact friction. The book is accessible to practitioners in the areas of application, as well as students and researchers working on related topics. In particular, the aim is to introduce the key concepts of nonlinear vibration to readers who have an understanding of linear vibration and/or linear control, but no specialist knowledge in nonlinear dynamics or nonlinear control.

Download or read book Vibration Control of Active Structures written by A. Preumont and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: My objective in writing this book was to cross the bridge between the structural dynamics and control communities, while providing an overview of the potential of SMART materials for sensing and actuating purposes in active vibration c- trol. I wanted to keep it relatively simple and focused on systems which worked. This resulted in the following: (i) I restricted the text to fundamental concepts and left aside most advanced ones (i.e. robust control) whose usefulness had not yet clearly been established for the application at hand. (ii) I promoted the use of collocated actuator/sensor pairs whose potential, I thought, was strongly underestimated by the control community. (iii) I emphasized control laws with guaranteed stability for active damping (the wide-ranging applications of the IFF are particularly impressive). (iv) I tried to explain why an accurate pred- tion of the transmission zeros (usually called anti-resonances by the structural dynamicists) is so important in evaluating the performance of a control system. (v) I emphasized the fact that the open-loop zeros are more difficult to predict than the poles, and that they could be strongly influenced by the model trun- tion (high frequency dynamics) or by local effects (such as membrane strains in piezoelectric shells), especially for nearly collocated distributed actuator/sensor pairs; this effect alone explains many disappointments in active control systems.

Download or read book Mechanical Vibration written by Haym Benaroya and published by CRC Press. This book was released on 2017-08-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Vibration: Analysis, Uncertainties, and Control, Fourth Edition addresses the principles and application of vibration theory. Equations for modeling vibrating systems are explained, and MATLAB® is referenced as an analysis tool. The Fourth Edition adds more coverage of damping, new case studies, and development of the control aspects in vibration analysis. A MATLAB appendix has also been added to help students with computational analysis. This work includes example problems and explanatory figures, biographies of renowned contributors, and access to a website providing supplementary resources.

Download or read book Engineering Vibration Analysis with Application to Control Systems written by C. Beards and published by Elsevier. This book was released on 1995-06-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most machines and structures are required to operate with low levels of vibration as smooth running leads to reduced stresses and fatigue and little noise. This book provides a thorough explanation of the principles and methods used to analyse the vibrations of engineering systems, combined with a description of how these techniques and results can be applied to the study of control system dynamics. Numerous worked examples are included, as well as problems with worked solutions, and particular attention is paid to the mathematical modelling of dynamic systems and the derivation of the equations of motion. All engineers, practising and student, should have a good understanding of the methods of analysis available for predicting the vibration response of a system and how it can be modified to produce acceptable results. This text provides an invaluable insight into both.

Download or read book Vibration Control for Building Structures written by Aiqun Li and published by Springer Nature. This book was released on 2020-03-11 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to the field of structural vibration reduction control, but may also be used as a reference source for more advanced topics. The content is divided into four main parts: the basic principles of structural vibration reduction control, structural vibration reduction devices, structural vibration reduction design methods, and structural vibration reduction engineering practices. As the book strikes a balance between theoretical and practical aspects, it will appeal to researchers and practicing engineers alike, as well as graduate students.

Download or read book Active Control of Vibration written by Christopher C. Fuller and published by Academic Press. This book was released on 1996-02-08 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers. Combines material from vibrations, signal processing, mechanics, and controls Summarizes new research in the field

Download or read book Noise and Vibration Control written by Leo Leroy Beranek and published by McGraw-Hill Companies. This book was released on 1971 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration Dynamics and Control written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2008-11-16 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering,and engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face p- found issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series f- turing graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of concentrations important to mechanical engineering graduate - ucation and research. We are fortunate to have a distinguished roster of series editors, each an expert in one of the areas of concentration. The names of the series editors are listed on page vi of this volume. The areas of concentration are applied mechanics, biomechanics, computational - chanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Preface After15yearssincethepublicationofVibrationofStructuresandMachines and three subsequent editions a deep reorganization and updating of the material was felt necessary. This new book on the subject of Vibration dynamics and control is organized in a larger number of shorter chapters, hoping that this can be helpful to the reader. New materialhas been added and many points have been updated. A larger number of examples and of exercises have been included.

Download or read book Vibration Control For Optomechanical Systems written by Vyacheslav M Ryaboy and published by World Scientific. This book was released on 2021-11-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration presents a major challenge to advanced experiments and technological processes in engineering, physics and life sciences that rely on optics and optoelectronics. This compendium discusses ways in which vibration may affect optical performance and describes methods and means of reducing this impact. Principal methods of vibration control, namely, damping and isolation are highlighted using mathematical models and real-life examples.The unique text covers some topics that are important for optomechanical applications but are lacking in general vibration texts, such as dynamics and stability of elastically supported systems with high centers of gravity, physics of pneumatic isolators, and application of dynamic absorbers to vibration-isolated systems.This useful reference book enables the reader to apply the vibration control tools properly and perform basic analytical and experimental tasks of estimating and verifying their performance. It is also a must-have textbook for undergraduate or graduate-level courses in vibration control and optomechanics.Related Link(s)

Download or read book Vibration Theory and Applications with Finite Elements and Active Vibration Control written by Alan Palazzolo and published by John Wiley & Sons. This book was released on 2016-01-11 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on many years of research and teaching, this book brings together all the important topics in linear vibration theory, including failure models, kinematics and modeling, unstable vibrating systems, rotordynamics, model reduction methods, and finite element methods utilizing truss, beam, membrane and solid elements. It also explores in detail active vibration control, instability and modal analysis. The book provides the modeling skills and knowledge required for modern engineering practice, plus the tools needed to identify, formulate and solve engineering problems effectively.

Download or read book Control of Noise and Structural Vibration written by Qibo Mao and published by Springer Science & Business Media. This book was released on 2013-06-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Noise and Structural Vibration presents a MATLAB®-based approach to solving the problems of undesirable noise generation and transmission by structures and of undesirable vibration within structures in response to environmental or operational forces. The fundamentals of acoustics, vibration and coupling between vibrating structures and the sound fields they generate are introduced including a discussion of the finite element method for vibration analysis. Following this, the treatment of sound and vibration control begins, illustrated by example systems such as beams, plates and double walls. Sensor and actuator placement is explained as is the idea of modal sensor–actuators. The design of appropriate feedback systems includes consideration of basic stability criteria and robust active structural acoustic control. Positive position feedback (PPF) and multimode control are also described in the context of loudspeaker–duct and loudspeaker–microphone models. The design of various components is detailed including the analog circuit for PPF, adaptive (semi-active) Helmholtz resonators and shunt piezoelectric circuits for noise and vibration suppression. The text makes extensive use of MATLAB® examples and these can be simulated using files available for download from the book’s webpage at springer.com. End-of-chapter exercises will help readers to assimilate the material as they progress through the book. Control of Noise and Structural Vibration will be of considerable interest to the student of vibration and noise control and also to academic researchers working in the field. It’s tutorial features will help practitioners who wish to update their knowledge with self-study.

Download or read book Passive Vibration Control written by Denys J. Mead and published by John Wiley & Sons. This book was released on 1998 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account concerning the vibration control of equipment and tools as well as sound. Addresses those passive means developed over the years to control and restrict the level of vibration which may be produced. The first section contains the background vibration theory essential to understanding the nature of structural vibration and the structural parameters on which vibration levels depend. The latter half is devoted to the three parameters which can be tuned: stiffness, mass and damping. Describes various methods of passive vibration control techniques. Results of the author's internationally renowned research on damping are included.

Download or read book Vibration Damping Control and Design written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-04-05 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reducing and controlling the level of vibration in a mechanical system leads to an improved work environment and product quality, reduced noise, more economical operation, and longer equipment life. Adequate design is essential for reducing vibrations, while damping and control methods help further reduce and manipulate vibrations when design strat

Download or read book Modeling and Control of Vibration in Mechanical Systems written by Chunling Du and published by CRC Press. This book was released on 2018-09-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the ox carts and pottery wheels the spacecrafts and disk drives, efficiency and quality has always been dependent on the engineer’s ability to anticipate and control the effects of vibration. And while progress in negating the noise, wear, and inefficiency caused by vibration has been made, more is needed. Modeling and Control of Vibration in Mechanical Systems answers the essential needs of practitioners in systems and control with the most comprehensive resource available on the subject. Written as a reference for those working in high precision systems, this uniquely accessible volume: Differentiates between kinds of vibration and their various characteristics and effects Offers a close-up look at mechanical actuation systems that are achieving remarkably high precision positioning performance Includes techniques for rejecting vibrations of different frequency ranges Covers the theoretical developments and principles of control design with detail elaborate enough that readers will be able to apply the techniques with the help of MATLAB® Details a wealth of practical working examples as well as a number of simulation and experimental results with comprehensive evaluations The modern world’s ever-growing spectra of sophisticated engineering systems such as hard disk drives, aeronautic systems, and manufacturing systems have little tolerance for unanticipated vibration of even the slightest magnitude. Accordingly, vibration control continues to draw intensive focus from top control engineers and modelers. This resource demonstrates the remarkable results of that focus to date, and most importantly gives today’s researchers the technology that they need to build upon into the future. Chunling Du is currently researching modeling and advanced servo control of hard disk drives at the Data Storage Institute in Singapore. Lihua Xie is the Director of the Centre for Intelligent Machines and a professor at Nanyang Technological University in Singapore.

Download or read book Spatial Control of Vibration written by S. O. Reza Moheimani and published by World Scientific. This book was released on 2003 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a natural phenomenon that occurs in a variety of engineering systems. In many circumstances, vibration greatly affects the nature of engineering design as it often dictates limiting factors in the performance of the system. The conventional treatment is to redesign the system or to use passive damping. The former could be a costly exercise, while the latter is only effective at higher frequencies. Active control techniques have emerged as viable technologies to fill this low-frequency gap. This book is concerned with the study of feedback controllers for vibration control of flexible structures, with a view to minimizing vibration over the entire body of the structure.The book introduces a variety of flexible structures such as beams, strings, and plates with specific boundary conditions, and explains in detail how a spatially distributed model of such systems can be obtained. It addresses the problems of model reduction and model correction for spatially distributed systems of high orders, and goes on to extend robust control techniques such as H-infinity and H2 control design methodologies to spatially distributed systems arising in active vibration control problems. It also addresses other important topics, such as actuator and sensor placement for flexible systems, and system identification for flexible structures with irregular boundary conditions. The text contains numerous examples, and experimental results obtained from laboratory-level apparatus, with details of how similar test beds may be built.