Download or read book Vibration Modal Characterization of a Stirling Convertor Via Base Shake Excitation written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-20 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE), Lockheed Martin (LM), Stirling Technology Company (STC), and NASA John H. Glenn Research Center (GRC) are currently developing a high-efficiency Stirling convertor for use in a Stirling Radioisotope Generator (SRG). NASA and DOE have identified the SRG for potential use as an advanced power system for future NASA Space Science missions, providing spacecraft onboard electric power for deep space missions and power for unmanned Mars rovers. Low-level, baseshake sine vibration tests were conducted on the Stirling Technology Demonstration Convertor (TDC), at NASA GRC's Structural Dynamics Laboratory, in February 2001, as part of the development of this Stirling technology. The purpose of these tests was to provide a better understanding of the TDC's internal dynamic response to external vibratory base excitations. The knowledge obtained can therein be used to help explain the success that the TDC enjoyed in its previous random vibration qualification tests (December 1999). This explanation focuses on the TDC s internal dynamic characteristics in the 50 to 250 Hz frequency range, which corresponds to the maximum input levels of its qualification random vibration test specification. The internal dynamic structural characteristics of the TDC have now been measured in two separate tests under different motoring and dynamic loading conditions: (1) with the convertor being electrically motored, under a vibratory base-shake excitation load, and (2) with the convertor turned off, and its alternator internals undergoing dynamic excitation via hammer impact loading. This paper addresses the test setup, procedure and results of the base-shake vibration testing conducted on the motored TDC, and will compare these results with those results obtained from the dynamic impact tests (May 2001) on the nonmotored TDC. Suarez, Vicente J. and Goodnight, Thomas W. and Hughes, William O. and Samorezov, Sergey Glenn Research Center NASA/TM-2003-212479, E-14
Download or read book Current Frontiers in Cryobiology written by Igor Katkov and published by BoD – Books on Demand. This book was released on 2012-03-09 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost a decade has passed since the last textbook on the science of cryobiology, Life in the Frozen State, was published. Recently, there have been some serious tectonic shifts in cryobiology which were perhaps not seen on the surface but will have a profound effect on both the future of cryobiology and the development of new cryopreservation methods. We feel that it is time to revise the previous paradigms and dogmas, discuss the conceptually new cryobiological ideas, and introduce the recently emerged practical protocols for cryopreservation. The present books, "Current Frontiers in Cryobiology" and "Current Frontiers in Cryopreservation" will serve the purpose. This is a global effort by scientists from 27 countries from all continents and we hope it will be interesting to a wide audience.
Download or read book Direct Energy Conversion written by Andrea M. Mitofsky and published by Createspace Independent Publishing Platform. This book was released on 2018-08-25 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries. In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.This peer-reviewed book is used for a junior level electrical engineering class at Trine University. However, it is intended not just for electrical engineers. Direct energy conversion is a fascinating topic because it does not fit neatly into a single discipline. This book also should be of interest to physicists, chemists, mechanical engineers, and other researchers interested in an introduction to the energy conversion devices studied by scientists and engineers in other disciplines.
Download or read book Seismic Structural Health Monitoring written by Maria Pina Limongelli and published by Springer. This book was released on 2019-04-24 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a collection of state-of-the-art contributions addressing both theoretical developments in, and successful applications of, seismic structural health monitoring (S2HM). Over the past few decades, Seismic SHM has expanded considerably, due to the growing demand among various stakeholders (owners, managers and engineering professionals) and researchers. The discipline has matured in the process, as can be seen by the number of S2HM systems currently installed worldwide. Furthermore, the responses recorded by S2HM systems hold great potential, both with regard to the management of emergency situations and to ordinary maintenance needs. The book’s 17 chapters, prepared by leading international experts, are divided into four major sections. The first comprises six chapters describing the specific requirements of S2HM systems for different types of civil structures and infrastructures (buildings, bridges, cultural heritage, dams, structures with base isolation devices) and for monitoring different phenomena (e.g. soil-structure interaction and excessive drift). The second section describes available methods and computational tools for data processing, while the third is dedicated to hardware and software tools for S2HM. In the book’s closing section, five chapters report on state-of-the-art applications of S2HM around the world.
Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.
Download or read book Noise and Vibration Analysis written by Anders Brandt and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration Analysis is a complete and practical guide that combines both signal processing and modal analysis theory with their practical application in noise and vibration analysis. It provides an invaluable, integrated guide for practicing engineers as well as a suitable introduction for students new to the topic of noise and vibration. Taking a practical learning approach, Brandt includes exercises that allow the content to be developed in an academic course framework or as supplementary material for private and further study. Addresses the theory and application of signal analysis procedures as they are applied in modern instruments and software for noise and vibration analysis Features numerous line diagrams and illustrations Accompanied by a web site at www.wiley.com/go/brandt with numerous MATLAB tools and examples. Noise and Vibration Analysis provides an excellent resource for researchers and engineers from automotive, aerospace, mechanical, or electronics industries who work with experimental or analytical vibration analysis and/or acoustics. It will also appeal to graduate students enrolled in vibration analysis, experimental structural dynamics, or applied signal analysis courses.
Download or read book SV Sound and Vibration written by and published by . This book was released on 1996 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steps to an Ecology of Mind written by Gregory Bateson and published by University of Chicago Press. This book was released on 2000 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gregory Bateson was a philosopher, anthropologist, photographer, naturalist, and poet, as well as the husband and collaborator of Margaret Mead. This classic anthology of his major work includes a new Foreword by his daughter, Mary Katherine Bateson. 5 line drawings.
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Sound Vibration written by and published by . This book was released on 1996 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MECHANICAL VIBRATIONS AND NOISE ENGINEERING written by AMBEKAR A.G. and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, which is a result of the author's many years of teaching, exposes the readers to the fundamentals of mechanical vibrations and noise engineering. It provides them with the tools essential to tackle the problem of vibrations produced in machines and structures due to unbalanced forces and the noise produced thereof. The text lays emphasis on mechanical engineering applications of the subject and develops conceptual understanding with the help of many worked-out examples. What distinguishes the text is that three chapters are devoted to Sound Level and Subjective Response to Sound, Noise: Effects, Ratings and Regulations and Noise: Sources, Isolation and Control. Importance of mathematical formulation in converting a distributed parameter vibration problem into an equivalent lumped parameter problem is also emphasized. Primarily designed as a text for undergraduate and postgraduate students of mechanical engineering, this book would also be useful for undergraduate and postgraduate students of civil, aeronautical and automobile engineering as well as practising engineers.
Download or read book Optical Tweezers written by Philip H. Jones and published by Cambridge University Press. This book was released on 2015-12-03 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the theory, practice and applications of optical tweezers, combining state-of-the-art research with a strong pedagogic approach.
Download or read book Multiconfigurational Quantum Chemistry written by Björn O. Roos and published by John Wiley & Sons. This book was released on 2016-08-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to aid in the understanding of multiconfigurational quantum chemistry, Multiconfigurational Quantum Chemistry demystifies a subject that has historically been considered difficult to learn. Accessible to any reader with a background in quantum mechanics and quantum chemistry, the book contains illustrative examples showing how these methods can be used in various areas of chemistry, such as chemical reactions in ground and excited states, transition metal and other heavy element systems. The authors detail the drawbacks and limitations of DFT and coupled-cluster based methods and offer alternative, wavefunction-based methods more suitable for smaller molecules.
Download or read book Developments in Dynamic Soil structure Interaction written by Polat G]lkan and published by Springer Science & Business Media. This book was released on 1993 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last couple of decades it has been recognized that the foundation material on which a structure is constructed may interact dynamically with the structure during its response to dynamic excitation to the extent that the stresses and deflections in the system are modified from the values that would have been developed if it had been on a rigid foundations. This phenomenon is examined in detail in this book.
Download or read book Simulating Humans written by Norman I. Badler and published by Oxford University Press, USA. This book was released on 1993-09-02 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of simulated human figures is an active research area in computer graphics, and Norman Badler's group at the University of Pennsylvania is one of the leaders in the field. This book summarizes the state of the art in simulating human figures, discusses many of the interesting application areas, and makes some assumptions and predictions about where the field is going.
Download or read book Biologically Inspired Robotics written by Yunhui Liu and published by CRC Press. This book was released on 2011-12-21 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotic engineering inspired by biology—biomimetics—has many potential applications: robot snakes can be used for rescue operations in disasters, snake-like endoscopes can be used in medical diagnosis, and artificial muscles can replace damaged muscles to recover the motor functions of human limbs. Conversely, the application of robotics technology to our understanding of biological systems and behaviors—biorobotic modeling and analysis—provides unique research opportunities: robotic manipulation technology with optical tweezers can be used to study the cell mechanics of human red blood cells, a surface electromyography sensing system can help us identify the relation between muscle forces and hand movements, and mathematical models of brain circuitry may help us understand how the cerebellum achieves movement control. Biologically Inspired Robotics contains cutting-edge material—considerably expanded and with additional analysis—from the 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO). These 16 chapters cover both biomimetics and biorobotic modeling/analysis, taking readers through an exploration of biologically inspired robot design and control, micro/nano bio-robotic systems, biological measurement and actuation, and applications of robotics technology to biological problems. Contributors examine a wide range of topics, including: A method for controlling the motion of a robotic snake The design of a bionic fitness cycle inspired by the jaguar The use of autonomous robotic fish to detect pollution A noninvasive brain-activity scanning method using a hybrid sensor A rehabilitation system for recovering motor function in human hands after injury Human-like robotic eye and head movements in human–machine interactions A state-of-the-art resource for graduate students and researchers in the fields of control engineering, robotics, and biomedical engineering, this text helps readers understand the technology and principles in this emerging field.
Download or read book Introduction to Symmetry Analysis Paperback with CD ROM written by Brian Cantwell and published by Cambridge University Press. This book was released on 2002-09-23 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to symmetry analysis for graduate students in science, engineering and applied mathematics.
