Download or read book Vibration Analysis of Cracked Aluminium Plates written by Asif Israr and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This research is concerned with analytical modelling of the effects of cracks in structural plates and panels within aerospace systems such as aeroplane fuselage, wing, and tail-plane structures, and, as such, is part of a larger body of research into damage detection methodologies in such systems. This study is based on generating a so-called reduced order analytical model of the behaviour of the plate panel, within which a crack with some arbitrary characteristics is present, and which is subjected to a force that causes it to vibrate. In practice such a scenario is potentially extremely dangerous as it can lead to failure, with obvious consequences. The equation that is obtained is in the form of the classical Duffing equation, in this case, the coefficients within the equation contain information about the geometrical and mass properties of the plate, the loading and boundary conditions, and the geometry, location, and potentially the orientation of the crack. This equation has been known for just over a century and has in the last few decades received very considerable attention from both the analytical dynamics community and also from the dynamical systems researchers, in particular the work of Ueda, Thompson, in the 1970s and 1980s, and Thomsen in the 1990s and beyond. An approximate analytical solution is obtained by means of the perturbation method of multiple scales. This powerful method was popularized in the 1970s by Ali H. Nayfeh, and discussed in his famous books, Â'Perturbation MethodsÂ' (1974) and Â'Nonlinear OscillationsÂ' (1979, with D.T. Mook), and also by J. Murdock (1990), and M.P. Cartmell et al. (2003) and has been shown to be immensely useful for a wide range of nonlinear vibration problems. In this work it is shown that different boundary conditions can be admitted for the plate and that the modal natural frequencies are sensitive to the crack geometry. Bifurcatory behaviour of the cracked plate has then been examined numerically, for a range of parameters. The model has been tested against experimental work and against a Finite Element model, with good corroboration from both. In all events, this is a significant new result in the field and one that if implemented within a larger damage detection strategy, could be of considerable practical use.
Download or read book New Research on Acoustics written by Benjamin N. Weiss and published by Nova Publishers. This book was released on 2008 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is the science concerned with the production, control, transmission, reception, and effects of sound. Its origins began with the study of mechanical vibrations and the radiation of these vibrations through mechanical waves, and still continue today. Research was done to look into the many aspects of the fundamental physical processes involved in waves and sound and into possible applications of these processes in modern life. The study of sound waves also leads to physical principles that can be applied to the study of all waves. The broad scope of acoustics as an area of interest and endeavour can be ascribed to a variety of reasons. First, there is the ubiquitous nature of mechanical radiation, generated by natural causes and by human activity. Then, there is the existence of the sensation of hearing, of the human vocal ability, of communication via sound, along with the variety of psychological influences sound has on those who hear it. Such areas as speech, music, sound recording and reproduction.
Download or read book CARe written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2014-10-09 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of Researcher Profiles from Centre for Advanced Research on Energy (CARe), Universiti Teknikal Malaysia Melaka.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thickness Effects on a Cracked Aluminum Plate with Composite Patch Repair written by Joel J. Schubbe and published by . This book was released on 1997-06-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Post-repair fatigue crack growth was investigated in 3.175, 4.826, and 6.35 mm thick aluminum panels asymmetrically repaired with boron/epoxy composite patches bonded to the plates with FM73 sheet adhesive. Patches were uniaxial with patch to panel stiffness ratios ranging from 0.46 to 1.3. Experimental fatigue tests were carried out at 120 MPa, R=0.1, and 10 Hz (sinusoidal) to measure patched and unpatched face crack lengths, center crack opening displacements, and selected strains. Crack growth data was acquired using optical, eddy current, and post-test analysis methods. Crack growth rates were calculated using the incremental polynomial method. A three-layer Mindlin plate finite element model was used as an analytical technique to predict patched and unpatched face reaction loads and displacements. These parameters, in conjunction with the modified crack closure method, were then used to compute crack growth rates for the specimens using experimentally determined material constants and the Paris Law relationship. Comparisons of the experimental to analytical curvatures of repaired panels showed excellent agreement. Crack growth rate predictions fall consistently within their experimental counterparts at the unpatched face. The present analysis is, thus, an effective tool to investigate the behavior of fatigue crack growth in aluminum panels repaired with composite patches.
Download or read book Enriched Numerical Techniques written by Azher Jameel and published by Elsevier. This book was released on 2024-05-09 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enriched Numerical Techniques: Implementation and Applications explores recent advances in enriched numerical techniques, including the extended finite element method, meshfree methods, extended isogeometric analysis and coupled numerical techniques. Techniques for implementation and programming issues are discussed, with other sections discussing applications for enriched numerical techniques in solving a range of engineering problems. The level set methodologies for complex shaped irregularities is presented, as are enriched numerical methodologies for various complex and advanced problems such as Nonlinear Structural Analysis, Fracture and Fatigue in Structures, Elasto-Plastic Crack Growth, Large Deformation Analysis, Frictional Contact Problems, Thermo-Mechanical Problems, Fluid Flow Investigations, Composite Materials and Bio-mechanics. - Features explanations on how to use enriched numerical techniques to model problems in fracture mechanics, continuum mechanics, fluid flow, and biomechanics - Explains methods through the use of worked examples throughout - Provides practical advice on how to tackle programming issues
Download or read book Introduction to Finite Element Vibration Analysis written by Maurice Petyt and published by Cambridge University Press. This book was released on 1998-07-30 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: First time paperback of successful mechanical engineering book suitable as a textbook for graduate students in mechanical engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring 2011 written by Fu-Kuo Chang and published by DEStech Publications, Inc. This book was released on 2011 with total page 1397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2-volume set of books, comprising over 2,700 total pages, presents 325 fully original presentations on recent advances in structural health monitoring, as applied to commercial and military aircraft (manned and unmanned), high-rise buildings, wind turbines, civil infrastructure, power plants and ships. One general theme of the books is how SHM can be used for condition-based maintenance, with the goal of developing prediction-based systems, designed to save money over the life of vehicles and structures. A second theme centers on technologies for developing systems comprising sensors, diagnostic data and decision-making, with a focus on intelligent materials able to respond to damage and in some cases repair it. Finally the books discuss the relation among data, data interpretation and decision-making in managing a wide variety of complex structures and vehicles. More recent technologies discussed in the books include SHM and environmental effects, energy harvesting, non-contact sensing, and intelligent networks.Material in these books was first presented in September, 2011 at a conference held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Office, the Office of Naval Research and the National Science Foundation. Some of the highlights of the books include: SHM technologies for condition-based maintenance (CBM) and predictive maintenance Verification, validation, qualification, data mining, prognostics systems for decision-making Structural health, sensing and materials in closed-loop intelligent networks Military and aerospace, bioinspired sensors, wind turbines, monitoring with MEMS, damage sensing, hot spot monitoring, SHM and ships, high-rise structures Includes a fully-searchable CD-ROM displaying many figures and charts in full color
Download or read book Current Technology Index written by and published by . This book was released on 1984 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Modal Patterns of Vibration of a Circular Aluminum Plate Using Time average Holography written by Phillip H. Malyak and published by . This book was released on 1980 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Feature Selection for Machine Learning Using the Dynamic Wavelet Fingerprint written by Mark K. Hinders and published by Springer Nature. This book was released on 2020-07-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various applications of machine learning using a new approach, the dynamic wavelet fingerprint technique, to identify features for machine learning and pattern classification in time-domain signals. Whether for medical imaging or structural health monitoring, it develops analysis techniques and measurement technologies for the quantitative characterization of materials, tissues and structures by non-invasive means. Intelligent Feature Selection for Machine Learning using the Dynamic Wavelet Fingerprint begins by providing background information on machine learning and the wavelet fingerprint technique. It then progresses through six technical chapters, applying the methods discussed to particular real-world problems. Theses chapters are presented in such a way that they can be read on their own, depending on the reader’s area of interest, or read together to provide a comprehensive overview of the topic. Given its scope, the book will be of interest to practitioners, engineers and researchers seeking to leverage the latest advances in machine learning in order to develop solutions to practical problems in structural health monitoring, medical imaging, autonomous vehicles, wireless technology, and historical conservation.
Download or read book Peridynamic Theory and Its Applications written by Erdogan Madenci and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the peridynamic theory, which provides the capability for improved modeling of progressive failure in materials and structures, and paves the way for addressing multi-physics and multi-scale problems. The book provides students and researchers with a theoretical and practical knowledge of the peridynamic theory and the skills required to analyze engineering problems. The text may be used in courses such as Multi-physics and Multi-scale Analysis, Nonlocal Computational Mechanics, and Computational Damage Prediction. Sample algorithms for the solution of benchmark problems are available so that the reader can modify these algorithms, and develop their own solution algorithms for specific problems. Students and researchers will find this book an essential and invaluable reference on the topic.
Download or read book Proceedings of Mechanical Engineering Research Day 2018 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2018-05-16 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the 5th Mechanical Engineering Research Day (MERD'18) - Kampus Teknologi UTeM, Melaka, Malaysia on 03 May 2018.
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Structural Damage Detection written by Tadeusz Stepinski and published by John Wiley & Sons. This book was released on 2013-05-20 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring (SHM) is the interdisciplinary engineering field devoted to the monitoring and assessment of structural health and integrity. SHM technology integrates non-destructive evaluation techniques using remote sensing and smart materials to create smart self-monitoring structures characterized by increased reliability and long life. Its applications are primarily systems with critical demands concerning performance where classical onsite assessment is both difficult and expensive. Advanced Structural Damage Detection: From Theory to Engineering Applications is written by academic experts in the field and provides students, engineers and other technical specialists with a comprehensive review of recent developments in various monitoring techniques and their applications to SHM. Contributing to an area which is the subject of intensive research and development, this book offers both theoretical principles and feasibility studies for a number of SHM techniques. Key features: Takes a multidisciplinary approach and provides a comprehensive review of main SHM techniques Presents real case studies and practical application of techniques for damage detection in different types of structures Presents a number of new/novel data processing algorithms Demonstrates real operating prototypes Advanced Structural Damage Detection: From Theory to Engineering Applications is a comprehensive reference for researchers and engineers and is a useful source of information for graduate students in mechanical and civil engineering
