Download or read book Versatility of Waterjet Technology written by Peter H.-T. Liu and published by CRC Press. This book was released on 2024-08-16 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waterjet technology involves complex flow phenomena, which include supersonic, turbulent, compressible, and three-phase interactions. This book, by the editor and colleagues, distills three decades of R&D expertise from Flow Industries, Inc. and OMAX Corp., based in Kent, Washington, USA. Organized into 10 sections and 32 chapters, it blends physical experiments and limited computational fluid dynamics analyses as R&D methodologies. Through flow visualization and probe measurement, the book characterizes waterjet geometry, water-droplet and abrasive speeds, surface roughness and edge qualities of machined parts, and more. It showcases advancements in micro abrasive-waterjet technology, recognized as a 2016 R&D 100 Awards finalist and honored with the 2016 Tibbitts Award from the U.S. Small Business Administration.
Download or read book Abrasive Technology written by Anna Rudawska and published by BoD – Books on Demand. This book was released on 2018-10-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject matter of this book is the information on the abrasive technology methods, the characteristics of the methods (for example, the technological parameters, tools, and machines), innovative methods, characteristics of surface structure and surface properties after this type of mechanical process, and application in various industrial branches and other technical and technological domains. Abrasive technology is very important, for example, in precision component manufacturing and nano-technology devices. The aim of this book is to present information on the characteristics and applications of abrasive technology, abrasive tools, tests, and also the innovative methods of this technology. This information enables scientists, engineers, and designers to ensure the soundness and integrity of the fabricated components and to develop new techniques effectively.
Download or read book Micromachining Techniques for Fabrication of Micro and Nano Structures written by Mojtaba Kahrizi and published by BoD – Books on Demand. This book was released on 2012-02-03 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromachining is used to fabricate three-dimensional microstructures and it is the foundation of a technology called Micro-Electro-Mechanical-Systems (MEMS). Bulk micromachining and surface micromachining are two major categories (among others) in this field. This book presents advances in micromachining technology. For this, we have gathered review articles related to various techniques and methods of micro/nano fabrications, like focused ion beams, laser ablation, and several other specialized techniques, from esteemed researchers and scientists around the world. Each chapter gives a complete description of a specific micromachining method, design, associate analytical works, experimental set-up, and the final fabricated devices, followed by many references related to this field of research available in other literature. Due to the multidisciplinary nature of this technology, the collection of articles presented here can be used by scientists and researchers in the disciplines of engineering, materials sciences, physics, and chemistry.
Download or read book Materials Forming Machining and Post Processing written by Kapil Gupta and published by Springer. This book was released on 2019-06-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of various forming, machining, and post processing techniques. Working principle, process mechanism, salient features and latest developments are primarily focused. It presents some basic and specialized processes to produce quality engineered parts. This book also incorporates some investigations on modelling, simulation and optimization of the aforementioned processes to improve quality and performance, productivity, and sustainability.
Download or read book Jet Cutting Technology written by A. Lichtarowicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the 11th International Conference on Jet Cutting Technology, held at St. Andrews, Scotland, on 8-10 September 1992. Jetting techniques have been successfully applied for many years in the field of cleaning and descaling. Today, however, jet cutting is used in operations as diverse as removing cancerous growths from the human body, decommissioning sunsea installations and disabling explosive munitions. The diversity is reflected in the papers presented at the conference. The papers were divided into several main sections: jetting basics -- materials; jetting basics -- fluid mechanics; mining and quarrying; civil engineering; new developments; petrochem; cleaning and surface treatment; and manufacturing. The high quality of papers presented at the conference has further reinforced its position as the premier event in the field. The volume will be of interest to researchers, developers and manufacturers of systems, equipment users and contractors.
Download or read book Anniversary Feature Papers written by Steven Y. Liang and published by MDPI. This book was released on 2021-04-15 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Journal of Manufacturing and Materials Processing (JMMP) aims to provide an international forum for the documentation and dissemination of recent, original, and significant research studies in the analysis of processes, equipment, systems, and materials related to material heat treatment, solidification, deformation, addition, removal, welding, and accretion for the industrial fabrication and production of parts, components, and products. The JMMP was established in 2017 and has published more than 300 contributions. It has been listed in the ESCI, Inspec (IET), and Scopus (Elsevier). In celebration of the anniversary of the JMMP, the Editorial Office has put together this Special Issue, which includes several representative papers that reflect the vibrant growth and dynamic trend of research in this field.
Download or read book Abrasive Waterjet Machining of Engineering Materials written by Jun Wang and published by Trans Tech Publications Ltd. This book was released on 2003-04-30 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industry is becoming ever more time-conscious with regard to the global economy, and the need for rapid prototyping and small production batches is increasing. These trends have placed a premium on the use of new and advanced technologies for quickly turning raw materials into usable goods; with no time being required for tooling. The need for advanced processing technologies is particularly evident when machining advanced materials, such as ceramics, composites and thermo-sensitive materials that have wide application but are considered to be "difficult-to-machine" using conventional machining technologies such as turning and milling. Abrasive waterjet (AWJ) machining has been found to be one of the advanced technologies that meet these processing requirements; due to its distinct advantages over other machining technologies.
Download or read book Advances in Water Jetting written by Dagmar Klichová and published by Springer Nature. This book was released on 2020-09-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on recent advances in the rapidly growing field of high-speed water jet technology, discussing research, developments and applications related to cutting, machining, repair of structures and buildings, cleaning, removal of coatings and layers, mining, and abrasive materials. It also explores special applications of high-pressure techniques, as well as important environmental aspects and solutions for technology transfer. Thanks to the balance of theory and practical findings, the book offers a timely snapshot for researchers and industrial communities alike, and a platform to facilitate communication and collaboration between the two groups.
Download or read book Proceedings of the Future Technologies Conference FTC 2018 written by Kohei Arai and published by Springer. This book was released on 2018-10-17 with total page 1174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book, presenting the proceedings of the 2018 Future Technologies Conference (FTC 2018), is a remarkable collection of chapters covering a wide range of topics, including, but not limited to computing, electronics, artificial intelligence, robotics, security and communications and their real-world applications. The conference attracted a total of 503 submissions from pioneering researchers, scientists, industrial engineers, and students from all over the world. After a double-blind peer review process, 173 submissions (including 6 poster papers) have been selected to be included in these proceedings. FTC 2018 successfully brought together technology geniuses in one venue to not only present breakthrough research in future technologies but to also promote practicality and applications and an intra- and inter-field exchange of ideas. In the future, computing technologies will play a very important role in the convergence of computing, communication, and all other computational sciences and applications. And as a result it will also influence the future of science, engineering, industry, business, law, politics, culture, and medicine. Providing state-of-the-art intelligent methods and techniques for solving real-world problems, as well as a vision of the future research, this book is a valuable resource for all those interested in this area.
Download or read book The Technology Teacher written by and published by . This book was released on 1998 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Innovations in Mechanical Engineering written by Meghanshu Vashista and published by Springer Nature. This book was released on 2022-04-15 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the 3rd International Conference on Recent Innovations & Technological Development in Mechanical Engineering (ICRITDME 2020). It focuses on recent innovations and technological developments in the area of mechanical engineering to solve real-life problems occurring in different domains. Various topics covered in this book include machinery and machine elements, automotive engineering, aerospace technology and astronautics, nanotechnology and microengineering, control, robotics, mechatronics, dynamical systems, control, fluid mechanics engineering, thermodynamics, and heat and mass transfer. The book will be useful for students, researchers and professionals working in the area of mechanical engineering and allied fields.
Download or read book Proceedings of the 5th Pacific Rim International Conference on Water Jet Technology written by M. M. Vijay and published by Allied Publishers. This book was released on 1998 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Machining and Manufacturing Processes written by Kaushik Kumar and published by Springer. This book was released on 2018-04-17 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development. The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.
Download or read book Principles of Abrasive Water Jet Machining written by Andreas W. Momber and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive water jet machining was introduced to manufacturing ten years ago and has been increasingly used for treating hard-to-machine and multi-layered materials and as an alternative tool for milling, turning, drilling and polishing. This is the first comprehensive review of the technique, dealing with a broad range of issues including mixing and acceleration processes, material removal mechanisms, process optimization and fluid mechanics. Explanations are given as the book follows the development of an abrasive water jet machining process, from tool generation through to machining results, supervision and control. This methodical journey through the field is marked by drawings, graphs and tables, many of which are being published here for the first time. Though the book is written at an academic level, it focuses very much on practical applications, which reflects the authors' extensive involvement with both laboratory research and industrial practices.
Download or read book Piercing of Materials with Abrasive Water Jet written by Ivana Kleinedlerová and published by Springer Nature. This book was released on 2022-01-08 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an innovative approach for piercing materials and shows how the application of computer software and correct setting of technological parameters in production are important tools for achieving the required production quality. Piercing of material is performed in practice for all types and thicknesses of materials, always within the residual material. This book shows how the AWJC piercing in material can be performed in a more productive way as is currently the case, bringing ultimate reduction of cutting costs, especially for cut material saving.
Download or read book Advanced Noncontact Cutting and Joining Technologies written by Rasheedat Modupe Mahamood and published by Springer. This book was released on 2018-03-02 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illuminates advanced cutting and joining processes, what they are used for, and the capabilities of these manufacturing techniques, especially in micro- and nano-fabrication. The authors illustrate the use of water jets and lasers that can be used to cut highly complex shapes without leaving burrs of heat affected zones, as well as friction stir welding processes that were not possible in the past. Rounding out their examination, the authors describe in detail the use of additive manufacturing for fabrication of micro and nano-scale components and the direction of future research. Incorporating many examples from industry, the book is ideal for professional engineers, technicians, and fabrication managers in multiple industries. Maximizes understanding of advanced manufacturing processes and their capabilities, as well as the limitations of each of these technologies; Explains use of contactless manufacturing processes in applications such as electronics and sensor fabrication; Serves as a ready reference on the latest cutting and joining technologies, including those at the micro- and nano-scale.
Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.
