Download or read book Vendor Capability for Low Thermal Expansion Mask Substrates for EUV Lithography written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of manufacturing infrastructure is required to ensure a commercial source of mask substrates for the timely introduction of EUVL. Improvements to the low thermal expansion materials that compose the substrate have been made, but need to be scaled to production quantities. We have been evaluating three challenging substrate characteristics to determine the state of the infrastructure for the finishing of substrates. First, surface roughness is on track and little risk is associated with achieving the roughness requirement as an independent specification. Second, with new flatness-measuring equipment just coming on line, the vendors are poised for improvement toward the SEMI P37 flatness specification. Third, significant acceleration is needed in the reduction of defect levels on substrates. The lack of high-sensitivity defect metrology at the vendors' sites is limiting progress in developing substrates for EWL.
Download or read book EUV Lithography written by Vivek Bakshi and published by John Wiley & Sons. This book was released on 2009 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Bakshi has compiled a thorough, clear reference text covering the important fields of EUV lithography for high-volume manufacturing. This book has resulted from his many years of experience in EUVL development and from teaching this subject to future specialists. The book proceeds from an historical perspective of EUV lithography, through source technology, optics, projection system design, mask, resist, and patterning performance, to cost of ownership. Each section contains worked examples, a comprehensive review of challenges, and relevant citations for those who wish to further investigate the subject matter. Dr. Bakshi succeeds in presenting sometimes unfamiliar material in a very clear manner. This book is also valuable as a teaching tool. It has become an instant classic and far surpasses others in the EUVL field.
Download or read book Handbook of Photomask Manufacturing Technology written by Syed Rizvi and published by CRC Press. This book was released on 2018-10-03 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the semiconductor industry attempts to increase the number of functions that will fit into the smallest space on a chip, it becomes increasingly important for new technologies to keep apace with these demands. Photomask technology is one of the key areas to achieving this goal. Although brief overviews of photomask technology exist in the literature, the Handbook of Photomask Manufacturing Technology is the first in-depth, comprehensive treatment of existing and emerging photomask technologies available. The Handbook of Photomask Manufacturing Technology features contributions from 40 internationally prominent authors from industry, academia, government, national labs, and consortia. These authors discuss conventional masks and their supporting technologies, as well as next-generation, non-optical technologies such as extreme ultraviolet, electron projection, ion projection, and x-ray lithography. The book begins with an overview of the history of photomask development. It then demonstrates the steps involved in designing, producing, testing, inspecting, and repairing photomasks, following the sequences observed in actual production. The text also includes sections on materials used as well as modeling and simulation. Continued refinements in the photomask-making process have ushered in the sub-wavelength era in nanolithography. This invaluable handbook synthesizes these refinements and provides the tools and possibilities necessary to reach the next generation of microfabrication technologies.
Download or read book Mask Substrate Requirements and Development for Extreme Ultraviolet Lithography EUVL written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The mask is deemed one of the areas that require significant research and development in EUVL. Silicon wafers will be used for mask substrates for an alpha-class EUVL exposure tool due to their low-defect levels and high quality surface finish. However, silicon has a large coefficient of thermal expansion that leads to unacceptable image distortion due to absorption of EUV light. A low thermal expansion glass or glass-ceramic is likely to be required in order to meet error budgets for the 70nm node and beyond. Since EUVL masks are used in reflection, they are coated with multilayers prior to patterning. Surface imperfections, such as polishing marks, particles, scratches, or digs, are potential nucleation sites for defects in the multilayer coating, which could result in the printed defects. Therefore we are accelerating developments in the defect reduction and surface finishing of low thermal expansion mask substrates in order to understand long-term issues in controlling printable defects, and to establish the infrastructure for supplying masks. In this paper, we explain the technical requirements for EUVL mask substrates and describe our efforts in establishing a SEMI standard for EUVL masks. We will also report on the early progress of our suppliers in producing low thermal-expansion mask substrates for our development activities.
Download or read book Advances in Low Defect Multilayers for EUVL Mask Blanks written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-defect multilayer coatings are required to fabricate mask blanks for Extreme Ultraviolet Lithography (EUVL). The mask blanks consist of high reflectance E W multilayers on low thermal expansion substrates. A defect density of 0.0025 printable defects/cm2 for both the mask substrate and the multilayer is required to provide a mask blank yield of 60%. Current low defect multilayer coating technology allows repeated coating-added defect levels of 0.05/cm2 for defects greater than 90 nm polystyrene latex sphere (PSL) equivalent size for lots of 20 substrates. Extended clean operation of the coating system at levels below 0.08/cm2 for 3 months of operation has also been achieved. Two substrates with zero added defects in the quality area have been fabricated, providing an existence proof that ultra low defect coatings are possible. Increasing the ion source-to-target distance from 410 to 560 mm to reduce undesired coating of the ion source caused the defect density to increase to 0.2/cm2. Deposition and etching diagnostic witness substrates and deposition pinhole cameras showed a much higher level of ion beam spillover (ions missing the sputter target) than expected. Future work will quantify beam spillover, and test designs to reduce spillover, if it is confirmed to be the cause of the increased defect level. The LDD system will also be upgraded to allow clean coating of standard format mask substrates. The upgrade will confirm that the low defect process developed on Si wafers is compatible with the standard mask format 152 mm square substrates, and will provide a clean supply of EUVL mask blanks needed to support development of EUVL mask patterning processes and clean mask handling technologies.
Download or read book Photomask and Next generation Lithography Mask Technology XI written by and published by . This book was released on 2004 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EUV Lithography written by Vivek Bakshi and published by SPIE Press. This book was released on 2009 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Editorial Review Dr. Bakshi has compiled a thorough, clear reference text covering the important fields of EUV lithography for high-volume manufacturing. This book has resulted from his many years of experience in EUVL development and from teaching this subject to future specialists. The book proceeds from an historical perspective of EUV lithography, through source technology, optics, projection system design, mask, resist, and patterning performance, to cost of ownership. Each section contains worked examples, a comprehensive review of challenges, and relevant citations for those who wish to further investigate the subject matter. Dr. Bakshi succeeds in presenting sometimes unfamiliar material in a very clear manner. This book is also valuable as a teaching tool. It has become an instant classic and far surpasses others in the EUVL field. --Dr. Akira Endo, Chief Development Manager, Gigaphoton Inc. Description Extreme ultraviolet lithography (EUVL) is the principal lithography technology aiming to manufacture computer chips beyond the current 193-nm-based optical lithography, and recent progress has been made on several fronts: EUV light sources, optics, optics metrology, contamination control, masks and mask handling, and resists. This comprehensive volume is comprised of contributions from the world's leading EUVL researchers and provides all of the critical information needed by practitioners and those wanting an introduction to the field. Interest in EUVL technology continues to increase, and this volume provides the foundation required for understanding and applying this exciting technology. About the editor of EUV Lithography Dr. Vivek Bakshi previously served as a senior member of the technical staff at SEMATECH; he is now president of EUV Litho, Inc., in Austin, Texas.
Download or read book Soft X Rays and Extreme Ultraviolet Radiation written by David Attwood and published by Cambridge University Press. This book was released on 2007-02-22 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed, comprehensive book describes the fundamental properties of soft X-rays and extreme ultraviolet (EUV) radiation and discusses their applications in a wide variety of fields, including EUV lithography for semiconductor chip manufacture and soft X-ray biomicroscopy. The author begins by presenting the relevant basic principles such as radiation and scattering, wave propagation, diffraction, and coherence. He then goes on to examine a broad range of phenomena and applications. The topics covered include spectromicroscopy, EUV astronomy, synchrotron radiation, and soft X-ray lasers. The author also provides a wealth of useful reference material such as electron binding energies, characteristic emission lines and photo-absorption cross-sections. The book will be of great interest to graduate students and researchers in engineering, physics, chemistry, and the life sciences. It will also appeal to practising engineers involved in semiconductor fabrication and materials science.
Download or read book Labs on Chip written by Eugenio Iannone and published by CRC Press. This book was released on 2018-09-03 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Labs on Chip: Principles, Design and Technology provides a complete reference for the complex field of labs on chip in biotechnology. Merging three main areas— fluid dynamics, monolithic micro- and nanotechnology, and out-of-equilibrium biochemistry—this text integrates coverage of technology issues with strong theoretical explanations of design techniques. Analyzing each subject from basic principles to relevant applications, this book: Describes the biochemical elements required to work on labs on chip Discusses fabrication, microfluidic, and electronic and optical detection techniques Addresses planar technologies, polymer microfabrication, and process scalability to huge volumes Presents a global view of current lab-on-chip research and development Devotes an entire chapter to labs on chip for genetics Summarizing in one source the different technical competencies required, Labs on Chip: Principles, Design and Technology offers valuable guidance for the lab-on-chip design decision-making process, while exploring essential elements of labs on chip useful both to the professional who wants to approach a new field and to the specialist who wants to gain a broader perspective.
Download or read book Nanocoatings and Ultra Thin Films written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2011-09-14 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coatings are used for a wide range of applications, from anti-fogging coatings for glass through to corrosion control in the aerospace and automotive industries. Nanocoatings and ultra-thin films provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings.Part one covers technologies used in the creation and analysis of thin films, including chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films. Part two focuses on the applications of nanocoatings and ultra-thin films, with chapters covering topics such as nanocoatings for architectural glass, packaging applications, conventional and smart nanocoatings for corrosion protection in aerospace engineering and ultra-thin membranes for sensor applications.With its distinguished editors and international team of contributors, Nanocoatings and ultra-thin films is an essential reference for professional engineers in the glazing, consctruction, electronics and transport industries, as well as all those with an academic research interest in the field. - Provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings - Focuses on the applications of nanocoatings and ultra-thin films, covering topics such as nanocoatings for architectural glass, packaging applications and ultra-thin membranes for sensor applications - Includes chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films
Download or read book Bebop to the Boolean Boogie written by Clive Maxfield and published by Newnes. This book was released on 2008-12-05 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This entertaining and readable book provides a solid, comprehensive introduction to contemporary electronics. It's not a "how-to-do" electronics book, but rather an in-depth explanation of how today's integrated circuits work, how they are designed and manufactured, and how they are put together into powerful and sophisticated electronic systems. In addition to the technical details, it's packed with practical information of interest and use to engineers and support personnel in the electronics industry. It even tells how to pronounce the alphabet soup of acronyms that runs rampant in the industry. - Written in conversational, fun style that has generated a strong following for the author and sales of over 14,000 copies for the first two editions - The Third Edition is even bigger and better, with lots of new material, illustrations, and an expanded glossary - Ideal for training incoming engineers and technicians, and for people in marketing or other related fields or anyone else who needs to familiarize themselves with electronics terms and technology
Download or read book Fabless written by Daniel Nenni and published by Createspace Independent Publishing Platform. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to illustrate the magnificence of the fabless semiconductor ecosystem, and to give credit where credit is due. We trace the history of the semiconductor industry from both a technical and business perspective. We argue that the development of the fabless business model was a key enabler of the growth in semiconductors since the mid-1980s. Because business models, as much as the technology, are what keep us thrilled with new gadgets year after year, we focus on the evolution of the electronics business. We also invited key players in the industry to contribute chapters. These "In Their Own Words" chapters allow the heavyweights of the industry to tell their corporate history for themselves, focusing on the industry developments (both in technology and business models) that made them successful, and how they in turn drive the further evolution of the semiconductor industry.
Download or read book Fundamentals and Applications of Nano Silicon in Plasmonics and Fullerines written by Munir H. Nayfeh and published by Elsevier. This book was released on 2018-06-29 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Nano Silicon in Plasmonics and Fullerines: Current and Future Trends addresses current and future trends in the application and commercialization of nanosilicon. The book presents current, innovative and prospective applications and products based on nanosilicon and their binary system in the fields of energy harvesting and storage, lighting (solar cells and nano-capacitor and fuel cell devices and nanoLEDs), electronics (nanotransistors and nanomemory, quantum computing, photodetectors for space applications; biomedicine (substance detection, plasmonic treatment of disease, skin and hair care, implantable glucose sensor, capsules for drug delivery and underground water and oil exploration), and art (glass and pottery). Moreover, the book includes material on the use of advanced laser and proximal probes for imaging and manipulation of nanoparticles and atoms. In addition, coverage is given to carbon and how it contrasts and integrates with silicon with additional related applications. This is a valuable resource to all those seeking to learn more about the commercialization of nanosilicon, and to researchers wanting to learn more about emerging nanosilicon applications. - Features a variety of designs and operation of nano-devices, helping engineers to make the best use of nanosilicon - Contains underlying principles of how nanomaterials work and the variety of applications they provide, giving those new to nanosilicon a fundamental understanding - Assesses the viability of various nanoslicon devices for mass production and commercialization, thereby providing an important source of information for engineers
Download or read book Vacuum Ultraviolet Spectroscopy written by James A. Samson and published by Academic Press. This book was released on 2000-12-21 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of Vacuum Ultraviolet Spectroscopy was first published in 1967. In the three decades since, the techniques associated with vacuum ultraviolet spectroscopy have been greatly expanded. Originally published as two volumes in the serial "Experimental Methods in the Physical Sciences," Vacuum Ultraviolet Spectroscopy combines in one paperback volume information on the many advances in vacuum ultraviolet (VUV) research. In addition, the book provides students and researchers with concise reviews of the important aspects of designing experiments in the VUV region.This is the only comprehensive treatise describing the use of synchrotron and other light sources for research, along with the new technologies in optical elements, multilayers, mirror coatings, soft x-ray zone plates, VUV detectors, interferometric spectrometers, and subjects such as spectromicroscopy, lithography, and photon-induced fluorescence. Vacuum Ultraviolet Spectroscopy is an ideal handbook both for the beginner and for the experienced researcher in any field requiring the use of VUV radiation. Key Features* Detailed review of synchrotron radiation sources including undulators and wigglers* Comprehensive outline of monochromator design* Concise review of optics theory for multilayers, spectrometers, and zone plates* Information about other important VUV sources such as laser produced plasmas and Electron Beam Ion Trap (EBIT) sources* Applications such as spectromicroscopy, lithography, and fluorescence
Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.
Download or read book Nano CMOS Circuit and Physical Design written by Ban Wong and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the authors' expansive collection of notes taken over the years, Nano-CMOS Circuit and Physical Design bridges the gap between physical and circuit design and fabrication processing, manufacturability, and yield. This innovative book covers: process technology, including sub-wavelength optical lithography; impact of process scaling on circuit and physical implementation and low power with leaky transistors; and DFM, yield, and the impact of physical implementation.
Download or read book Nanoimprint Lithography written by Hongbo Lan and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography, the fundamental fabrication process of semiconductor devices, has been playing a critical role in micro-nanofabrication technologies and manufacturing of Integrated Circuits (IC). Traditional optical lithography including contact and project photolithography has contributed significantly to the semiconductor device advancements. Currently, maintaining the rapid pace of half-pitch reduction requires overcoming the challenge of improving and extending the incumbent optical projection lithography technology while simultaneously developing alternative, next generation lithography (NGL) technologies to be used when optical projection lithography is no longer more economical than the alternatives. Furthermore, NIL is also one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures as this highly technical book will give new insight to.
