Download or read book Introduction to Automotive Engineering written by R. Sakthivel and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is one of the largest and most important industries in the world. Cars, buses, and other engine-based vehicles abound in every country on the planet, and it is continually evolving, with electric cars, hybrids, self-driving vehicles, and so on. Technologies that were once thought to be decades away are now on our roads right now. Engineers, technicians, and managers are constantly needed in the industry, and, often, they come from other areas of engineering, such as electrical engineering, process engineering, or chemical engineering. Introductory books like this one are very useful for engineers who are new to the industry and need a tutorial. Also valuable as a textbook for students, this introductory volume not only covers the basics of automotive engineering, but also the latest trends, such as self-driving vehicles, hybrids, and electric cars. Not only useful as an introduction to the science or a textbook, it can also serve as a valuable reference for technicians and engineers alike. The volume also goes into other subjects, such as maintenance and performance. Data has always been used in every company irrespective of its domain to improve the operational efficiency and performance of engines. This work deals with details of various automotive systems with focus on designing various components of these system to suit the working conditions on roads. Whether a textbook for the student, an introduction to the industry for the newly hired engineer, or a reference for the technician or veteran engineer, this volume is the perfect introduction to the science of automotive engineering.

Download or read book A Textbook of Automobile Engineering written by SK Gupta and published by S. Chand Publishing. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A Textbook of Automobile Engineering is a comprehensive treatise which provides clear explanation of vehicle components and basic working principles of systems with simple, unique and easy-to-understand illustrations. The textbook also describes the latest and upcoming technologies and developments in automobiles. This edition has been completely updated covering the complete syllabi of most Indian Universities with the aim to be useful for both the students and faculty members. The textbook will also be a valuable source of information and reference for vocational courses, competitive exams, interviews and working professionals.

Download or read book Vehicle and Automotive Engineering 4 written by Károly Jármai and published by Springer Nature. This book was released on 2022-09-09 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected proceedings of the (third) fourth Vehicle and Automotive Engineering conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.

Download or read book Automotive Engineering Fundamentals written by Richard Stone and published by SAE International. This book was released on 2004-04-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the introduction of Automotive Engineering Fundamentals, Richard Stone and Jeffrey K. Ball provide a fascinating and often amusing history of the passenger vehicle, showcasing the various highs and lows of this now-indispensable component of civilized societies. The authors then provide an overview of the publication, which is designed to give the student of automotive engineering a basic understanding of the principles involved with designing a vehicle. From engines and transmissions to vehicle aerodynamics and computer modeling, the intelligent, interesting presentation of core concepts in Automotive Engineering Fundamentals is sure to make this an indispensable resource for engineering students and professionals alike.

Download or read book A Practical Approach to Motor Vehicle Engineering and Maintenance written by Allan Bonnick and published by Routledge. This book was released on 2011-05-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated and in line with latest specifications, this textbook integrates vehicle maintenance procedures, making it the indispensable first classroom and workshop text for all students of motor vehicle engineering, apprentices and keen amateurs. Its clear, logical approach, excellent illustrations and step-by-step development of theory and practice make this an accessible text for students of all abilities. With this book, students have information that they can trust because it is written by an experienced practitioner and lecturer in this area. This book will provide not only the information required to understand automotive engines but also background information that allows readers to put this information into context. The book contains flowcharts, diagnostic case studies, detailed diagrams of how systems operate and overview descriptions of how systems work. All this on top of step-by-step instructions and quick reference tables. Readers won't get bored when working through this book with questions and answers that aid learning and revision included.

Download or read book Control Applications of Vehicle Dynamics written by Jingsheng Yu and published by CRC Press. This book was released on 2021-12-20 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential knowledge of car vehicle dynamics and control theory with NI LabVIEW software product application, resulting in a practical yet highly technical guide for designing advanced vehicle dynamics and vehicle system controllers. Presenting a clear overview of fundamental vehicle dynamics and vehicle system mathematical models, the book covers linear and non-linear design of model based controls such as wheel slip control, vehicle speed control, path following control, vehicle stability and rollover control, stabilization of vehicle-trailer system. Specific applications to autonomous vehicles are described among the methods. It details the practical applications of Kalman-Bucy filtering and the observer design for sensor signal estimation, alongside lateral vehicle dynamics and vehicle rollover dynamics. The book also discusses high level controllers, alongside a clear explanation of basic control principles for regenerative braking in both electric and hybrid vehicles, and wheel torque vectoring systems. Concrete LabVIEW simulation examples of how the models and controls are used in representative applications, along with software algorithms and LabVIEW block diagrams are illustrated. It will be of interest to engineering students, automotive engineering students and automotive engineers and researchers.

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Fundamentals of Automotive and Engine Technology written by Konrad Reif and published by Springer. This book was released on 2014-06-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid drives and the operation of hybrid vehicles are characteristic of contemporary automotive technology. Together with the electronic driver assistant systems, hybrid technology is of the greatest importance and both cannot be ignored by today’s car drivers. This technical reference book provides the reader with a firsthand comprehensive description of significant components of automotive technology. All texts are complemented by numerous detailed illustrations.

Download or read book Theory of Ground Vehicles written by J. Y. Wong and published by John Wiley & Sons. This book was released on 2001-03-20 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated edition of the classic reference on the dynamics of road and off-road vehicles As we enter a new millennium, the vehicle industry faces greater challenges than ever before as it strives to meet the increasing demand for safer, environmentally friendlier, more energy efficient, and lower emissions products. Theory of Ground Vehicles, Third Edition gives aspiring and practicing engineers a fundamental understanding of the critical factors affecting the performance, handling, and ride essential to the development and design of ground vehicles that meet these requirements. As in previous editions, this book focuses on applying engineering principles to the analysis of vehicle behavior. A large number of practical examples and problems are included throughout to help readers bridge the gap between theory and practice. Covering a wide range of topics concerning the dynamics of road and off-road vehicles, this Third Edition is filled with up-to-date information, including: * The Magic Formula for characterizing pneumatic tire behavior from test data for vehicle handling simulations * Computer-aided methods for performance and design evaluation of off-road vehicles, based on the author's own research * Updated data on road vehicle transmissions and operating fuel economy * Fundamentals of road vehicle stability control * Optimization of the performance of four-wheel-drive off-road vehicles and experimental substantiation, based on the author's own investigations * A new theory on skid-steering of tracked vehicles, developed by the author.

Download or read book Automotive Systems Engineering written by Markus Maurer and published by Springer Science & Business Media. This book was released on 2013-05-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as “automotive systems engineering”. These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

Download or read book Vehicle and Automotive Engineering written by Károly Jármai and published by Springer. This book was released on 2017-03-23 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the first vehicle engineering and vehicle industry conference. It captures the outcome of theoretical and practical studies as well as the future development trends in a wide field of automotive research. The themes of the conference include design, manufacturing, economic and educational topics.

Download or read book Encyclopedia of Automotive Engineering written by David Crolla and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Choice Oustanding Academic Title The Encyclopedia of Automotive Engineering provides for the first time a large, unified knowledge base laying the foundation for advanced study and in-depth research. Through extensive cross-referencing and search functionality it provides a gateway to detailed but scattered information on best industry practice, engendering a better understanding of interrelated concepts and techniques that cut across specialized areas of engineering. Beyond traditional automotive subjects the Encyclopedia addresses green technologies, the shift from mechanics to electronics, and the means to produce safer, more efficient vehicles within varying economic restraints worldwide. The work comprises nine main parts: (1) Engines: Fundamentals (2) Engines: Design (3) Hybrid and Electric Powertrains (4) Transmission and Driveline (5) Chassis Systems (6) Electrical and Electronic Systems (7) Body Design (8) Materials and Manufacturing (9) Telematics. Offers authoritative coverage of the wide-ranging specialist topics encompassed by automotive engineering An accessible point of reference for entry level engineers and students who require an understanding of the fundamentals of technologies outside of their own expertise or training Provides invaluable guidance to more detailed texts and research findings in the technical literature Developed in conjunction with FISITA, the umbrella organisation for the national automotive societies in 37 countries around the world and representing more than 185,000 automotive engineers 6 Volumes www.automotive-reference.com An essential resource for libraries and information centres in industry, research and training organizations, professional societies, government departments, and all relevant engineering departments in the academic sector.

Download or read book Fundamentals of Vehicle Dynamics and Modelling written by Bruce P. Minaker and published by John Wiley & Sons. This book was released on 2019-08-15 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to vehicle dynamics and the fundamentals of mathematical modeling Fundamentals of Vehicle Dynamics and Modeling is a student-focused textbook providing an introduction to vehicle dynamics, and covers the fundamentals of vehicle model development. It illustrates the process for construction of a mathematical model through the application of the equations of motion. The text describes techniques for solution of the model, and demonstrates how to conduct an analysis and interpret the results. A significant portion of the book is devoted to the classical linear dynamic models, and provides a foundation for understanding and predicting vehicle behaviour as a consequence of the design parameters. Modeling the pneumatic tire is also covered, along with methods for solving the suspension kinematics problem, and prediction of acceleration and braking performance. The book introduces the concept of multibody dynamics as applied to vehicles and provides insight into how large and high fidelity models can be constructed. It includes the development of a method suitable for computer implementation, which can automatically generate and solve the linear equations of motion for large complex models. Key features: ● Accompanied by a website hosting MATLAB® code. ● Supported by the Global Education Delivery channels. Fundamentals of Vehicle Dynamics and Modeling is an ideal textbook for senior undergraduate and graduate courses on vehicle dynamics.

Download or read book Proceedings of the 4th International Congress of Automotive and Transport Engineering AMMA 2018 written by Nicolae Burnete and published by Springer. This book was released on 2018-09-29 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes selected and reviewed papers from the 4th International Congress of Automotive and Transport Engineering, held in Cluj, Romania, in September 2018. Authors are experts from research, industry and universities coming from 14 countries worldwide. The papers are covering the latest developments in automotive vehicles and environment, advanced transport systems and road traffic, heavy and special vehicles, new materials, manufacturing technologies and logistics, accident research and analysis and innovative solutions for automotive vehicles. The conference is organized by SIAR (Society of Automotive Engineers from Romania) in cooperation with FISITA.

Download or read book Automotive Engineering e Mega Reference written by David Crolla and published by Butterworth-Heinemann. This book was released on 2009-09-24 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-stop Mega Reference eBook brings together the essential professional reference content from leading international contributors in the automotive field. An expansion the Automotive Engineering print edition, this fully searchable electronic reference book of 2500 pages delivers content to meet all the main information needs of engineers working in vehicle design and development. Material ranges from basic to advanced topics from engines and transmissions to vehicle dynamics and modelling. * A fully searchable Mega Reference Ebook, providing all the essential material needed by Automotive Engineers on a day-to-day basis. * Fundamentals, key techniques, engineering best practice and rules-of-thumb together in one quick-reference. * Over 2,500 pages of reference material, including over 1,500 pages not included in the print edition

Download or read book Automotive Innovation written by Patrick Hossay and published by CRC Press. This book was released on 2019-07-12 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Innovation: The Science and Engineering behind Cutting-Edge Automotive Technology provides a survey of innovative automotive technologies in the auto industry. Automobiles are rapidly changing, and this text explores these trends. IC engines, transmissions, and chassis are being improved, and there are advances in digital control, manufacturing, and materials. New vehicles demonstrate improved performance, safety and efficiency factors; electric vehicles represent a green energy alternative, while sensor technologies and computer processors redefine the nature of driving. The text explores these changes, the engineering and science behind them, and directions for the future.

Download or read book The Automotive Body written by L. Morello and published by Springer Science & Business Media. This book was released on 2011-03-04 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The Automotive Body” consists of two volumes. The first volume produces the needful cultural background on the body; it describes the body and its components in use on most kinds of cars and industrial vehicles: the quantity of drawings that are presented allows the reader to familiarize with the design features and to understand functions, design motivations and fabrication feasibility, in view of the existing production processes. The second volume addresses the body system engineer and has the objective to lead him to the specification definition used to finalize detail design and production by the car manufacturer or the supply chain. The processing of these specifications, made by mathematical models of different complexity, starts always from the presentations of the needs of the customer using the vehicle and from the large number of rules imposed by laws and customs. The two volumes are completed by references, list of symbols adopted and subjects index. These two books about the vehicle body may be added to those about the chassis and are part of a series sponsored by ATA (the Italian automotive engineers association) on the subject of automotive engineering; they follow the first book, published in 2005 in Italian only, about automotive transmission. They cover automotive engineering from every aspect and are the result of a five-year collaboration between the Polytechnical University of Turin and the University of Naples on automotive engineering.