Download or read book Vegetable Oil based Epoxy Resin for Structural Composite Material Manufacturing written by Morteza Tatlari and published by . This book was released on 2008 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing of Vegetable Oils based Epoxy and Composites for Structural Applications written by Rongpeng Wang and published by . This book was released on 2014 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Epoxidized vegetable oil (EVO) is one of the largest industrial applications of vegetable oils (VOs) and is widely used as a plasticizer and as a synthetic intermediate for polyol or unsaturated polyester. However, the utility of EVO as monomer for high performance epoxy thermoset polymer is limited by its reactivity and by the resulting physical properties. Herein, VO-based epoxy monomers, i.e., glycidyl esters of epoxidized fatty acids derived from soybean oil (EGS) or linseed oil (EGL), have been synthesized and were benchmarked against commercial available diglycidyl ether of bisphenol A (DGEBA) and also epoxidized soybean oil (ESO) controls. EGS and EGL possessed higher oxirane content, more reactivity and lower viscosity than ESO or epoxidized linseed oil (ELO), provided better compatibility with DGEBA as a reactive diluent, and yielded thermally and mechanically stronger polymers than polymers obtained using ESO. Glass transition temperatures (T[subscript g]) of the VO-based epoxy thermoset polymers were mostly a function of monomer oxirane content with some added structural influences of epoxy reactivity, and presence of a pendant chain. Organo-modified montmorillonite clay (OMMT) and long glass fiber reinforced composites (FRC) were efficiently manufactured using anhydride cured EGS as matrices. The OMMT nanocomposites showed higher mechanical and thermal strength than the neat polymers but were also dependent on the dispersion techniques and the clay concentration. Surprisingly, the neat EGS-anhydride matrix FRC showed comparable properties, such as flexural and impact strengths and slightly lower T[subscript g], versus DGEBA based counterparts. These high performance monomers, polymers, and composites have potential to replace petroleum-based epoxy as value-added products from VOs compared to EVOs"--Abstract, page iv.
Download or read book Vegetable Oil Based Composites written by Showkat Ahmad Bhawani and published by Springer Nature. This book was released on with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vegetable Oil Based Polymers written by Niranjan Karak and published by Elsevier. This book was released on 2012-07-10 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing need to find a sustainable, environmentally-friendly replacement for petroleum-based materials is fuelling the development of bio-based polymers from renewable resources. Amongst the most promising of these are vegetable oil-based polymeric materials. Vegetable oil-based polymers provides a comprehensive review of the research in this important field.After an introduction to classification and polymerization, Vegetable oil-based polymers goes on to review the factors involved in polymer biodegradation. The extraction, purification and application of vegetable oils are then explored, along with vegetable oil-based polyesters and poly(ester amide)s, polyurethanes and epoxies. The book then reviews polyamides, polyolefins and vegetable oil-based hyperbranched polymers. It concludes with an analysis of vegetable oil-based polymer composites and polymer nanocomposites.Vegetable oil-based polymers is an indispensable guide for all those involved in the research and development of biopolymers as well as the wide range of industries looking for more sustainable polymer materials. - Provides a comprehensive review of recent research in the area of vegetable oil-based polymeric materials - Discusses vegetable oils and their derivatives, biodegradable polymers and the fundamentals of polymers - Explores the extraction, purification and application of vegetable oils, along with vegetable oil-based polyesters and poly(ester amide)s, polyurethanes and epoxies
Download or read book Epoxy Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-04-29 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a one-stop resource for in-depth knowledge on epoxy composites from leading voices in the field Used in a wide variety of materials engineering applications, epoxy composites are highly relevant to the work of engineers and scientists in many fields. Recent developments have allowed for significant advancements in their preparation, processing and characterization that are highly relevant to the aerospace and automobile industry, among others. In Epoxy Composites: Fabrication, Characterization and Applications, a distinguished team of authors and editors deliver a comprehensive and straightforward summary of the most recent developments in the area of epoxy composites. The book emphasizes their preparation, characterization and applications, providing a complete understanding of the correlation of rheology, cure reaction, morphology, and thermo-mechanical properties with filler dispersion. Readers will learn about a variety of topics on the cutting-edge of epoxy composite fabrication and characterization, including smart epoxy composites, theoretical modeling, recycling and environmental issues, safety issues, and future prospects for these highly practical materials. Readers will also benefit from the inclusion of: A thorough introduction to epoxy composites, their synthesis and manufacturing, and micro- and nano-scale structure formation in epoxy and clay nanocomposites An exploration of long fiber reinforced epoxy composites and eco-friendly epoxy-based composites Practical discussions of the processing of epoxy composites based on carbon nanomaterials and the thermal stability and flame retardancy of epoxy composites An analysis of the spectroscopy and X-ray scattering studies of epoxy composites Perfect for materials scientists, polymer chemists, and mechanical engineers, Epoxy Composites: Fabrication, Characterization and Applications will also earn a place in the libraries of engineering scientists working in industry and process engineers seeking a comprehensive and exhaustive resource on epoxy composites.
Download or read book Advanced fibre reinforced polymer FRP composites for structural applications written by V. Fiore and published by Elsevier Inc. Chapters. This book was released on 2013-09-30 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter discusses the epoxy resins which, thanks to their good and versatile properties, can be considered nowadays the most important class of thermosetting polymers. In particular the chapter first reviews both the epoxy resins commonly available on the market, including a new class of bio-derived epoxy resins, and the most-used curing agents. it then describes the principal characteristics of the epoxy resins and how it is possible to enhance them by adding several fillers to the epoxy system. Finally, the chapter analyzes the main engineering fields in which epoxy resins find application today and their possible future utilization.
Download or read book Bio Based Epoxy Polymers Blends and Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art overview on bioepoxy polymers as well as their blends and composites -- covering all aspects from fundamentals to applications! Bioepoxy polymers is an emerging area and have attracted more and more attention due to their biodegradability and good thermo-mechanical performance. In recent years, research progress has been made in synthesis, processing, characterization, and applications of bioepoxy blends and composites. Bioepoxy polymers are very promising candidates to replace the traditional thermosetting nonbiodegradable polymers. Bio-Based Epoxy Polymers, Blends and Composites summaries recent research progress on bioepoxy polymers as well as their blends and composites. It covers aspects from synthesis, processing, various characterization techniques to broad spectrum of applications. It provides a correlation of physical properties with macro, micro and nanostructures of the materials. Moreover, research trends, future directions, and opportunities are also discussed. Attracts attention: Bioepoxy polymers are environmentally friendly and considered as a promising candidate to replace the traditional thermosetting nonbiodegradable polymers Highly application-oriented: Bioepoxy polymers can be used in a broad range of applications such as polymer foams, construction, aerospace, automobiles, self-healing systems One-stop reference: Covers all aspects of bioepoxy polymer, their blends and composites, such as synthesis, properties, processing, characterization and applications Broad audience: Attracts attention from both academia and industry
Download or read book Soybean written by Minobu Kasai and published by BoD – Books on Demand. This book was released on 2019-02-20 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plants are important for a permanent ecosystem, because in the ecological pyramid plants support all the other living organisms at the base. Very important organization is thought to be the integral process of resource, transport, partitioning, metabolism, and production, which involves yield, biomass, and productivity in plants. Accordingly, it is important to obtain more information about the knowledge concerning yield, biomass, and productivity in plants. Soybean is one of the main crops largely contributing to our life, which is thought to be connected to our ecosystem through the above-mentioned integral process. This book focuses on the soybean, and reviews and research concerning the yield, biomass, and productivity of soybean are presented herein. This text updates the book published in 2017. Although there are many difficulties, the main aim of this book is to present a basis for the above-mentioned integral processes of resource, transport, partitioning, metabolism, and production, which involves yield, biomass, and productivity in plants (soybean), and to understand what supports this basis and the integral process. It is hoped that this and the preceding book will be essential reads.
Download or read book Fiber Reinforced Composites written by Kuruvilla Joseph and published by Woodhead Publishing. This book was released on 2021-03-20 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-based fibre-reinforced composites FRC's have now come out as a major class of structural materials being used or regarded as substituent's for metals in several critical components in space, automotive and other industries (marine, and sports goods) owing to their low density, strength-weight ratio, and fatigue strength. FRC's have several commercial as well as industrial applications ranging from aircraft, space, automotive, sporting goods, marine, and infrastructure. The above-mentioned applications of FRC's clearly reveal that FRC's have the potential to be used in a broad range of different engineering fields with the added advantages of low density, and resistance to corrosion compared to conventional metallic and ceramic composites. However, for scientists/researchers/R&D's to fabricate FRC's with such potential there should be careful and precise design followed by suitable process development based on properties like mechanical, physical, and thermal that are unique to each application. Hence the last few decades have witnessed considerable research on fibre reinforced composites. Fibre Reinforced Composites: Constituents, Compatibility, Perspectives and Applications presents a widespread all-inclusive review on fibre-reinforced composites ranging from the different types of processing techniques to chemical modification of the fibre surface to enhance the interfacial adhesion between the matrix and fibre and the structure-property relationship. It illustrates how high value composites can be produced by efficient and sustainable processing methods by selecting different constituents [fibres and resins]. Researchers in academia working in composites and accompanying areas [materials characterisation] and industrial manufacturers who need information on composite constituents and how they relate to each other for a certain application will find the book extremely useful when they need to make decisions about materials selection for their products. - Focuses on the different types of FRC's that are currently available (e.g. from polymeric matrices to metallic and ceramic matrices, from carbon fibre to different types of natural fibres and from short to long fibre reinforced), their processing techniques, characterization of different properties, and how to improve the interfacial adhesion between an incompatible fibre and matrix and their applications - Looks at crisis areas such as how to incorporate incompatible fibres and matrices together (e.g. Non-polar polypropylene matrix is not compatible with that of polar natural fibres and hence suitable surface modifications are required to make them compatible with each other) along with low cost processing methods, low density and high strength - Uncovers clarifications to both elementary and practical problems related to the fabrication of FRCs - Schematic representations depicting the interaction between different fibre types and matrices will be provided in some chapters
Download or read book Biobased Composites written by Anish Khan and published by John Wiley & Sons. This book was released on 2021-03-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the world of biocomposites with this one-stop resource edited by four international leaders in the field Bio-based Composites: Characterization, Properties, and Applications delivers a comprehensive treatment of all known characterization methods, properties, and industry applications of bio-based composites materials. This unique, one-stop resource covers all major developments in the field from the last decade of research into this environmentally beneficial area. The internationally recognized editors have selected resources that represent advances in the mechanical, thermal, tribological, and water sorption properties of bio-based composites, and cover new areas of research in physico-chemical analysis, flame retardancy, failure mechanisms, lifecycle assessment, and modeling of bio-based composites. The low weight, low cost, excellent thermal recyclability, and biodegradability of bio-based composites make them ideal candidates to replace engineered plastic products derived from fossil fuel. This book provides its readers with the knowledge they’ll require to understand a new class of materials increasingly being used in the automotive and packaging industries, aerospace, the military, and construction. It also includes: An extended discussion of the environmental impact of bio-based composites using a lice cycle methodology A review of forecasts of natural fiber reinforced polymeric composites and its degradability concerns An analysis of the physical and mechanical properties of a bio-based composite with sisal powder A comprehensive treatment of the mechanical, thermal, tribological, and dielectric properties of bio-based composites A review of processing methods for the manufacture of bio-based composites Perfect for materials scientists in private industry, government laboratories, or engaged in academic research, Bio-Based Composites will also earn a place in the libraries of industrial and manufacturing engineers who seek a better understanding of the beneficial industrial applications of biocomposites in industries ranging from automobiles to packaging.
Download or read book Future Automotive Production Conference 2022 written by Klaus Dröder and published by Springer Nature. This book was released on 2023-03-18 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the conference “Future Automotive Production 2022”, which took place in Wolfsburg. The conference focused on hybrid lightweight design, which is characterized by the combination of different materials with the aim of improving properties and reducing weight. In particular, production technologies for hybrid lightweight design were discussed, new evaluation methods for the ecological assessment of hybrid components were presented and future-oriented approaches motivated by nature for the development of components, assemblies and systems were introduced. Lightweight design is a key technology for the development of sustainable and resource-efficient mobility concepts. Vehicle manufacturers operate in an area of conflict between customer requirements, competition and legislation. Material hybrid structures, which combine the advantages of different materials, have a high potential for reducing weight, while simultaneously expanding component functionality. The future, efficient use of function-integrated hybrid structures in vehicle design requires innovations and constant developments in vehicle and production technology. There is a great demand, especially with regard to new methods and technologies, for "affordable" lightweight construction in large-scale production, taking into account the increasing requirements with regard to variant diversity, safety and quality.
Download or read book Fiber reinforced Composites written by P. K. Mallick and published by . This book was released on 1988 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry and Technology of Epoxy Resins written by Bryan Ellis and published by Springer Science & Business Media. This book was released on 1993 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Introduction to the chemistry, synthesis, manufacture and characterization of epoxy resins.- 2 Curing agents for epoxy resins.- 3 The kinetics of cure and network formation.- 4 Additives and modifiers for epoxy resins.- 5 Fracture behaviour of epoxy resins.- 6 Electrical properties of epoxy resins.- 7 Epoxy resin adhesives.- 8 Composite materials.- 9 Coatings and other applications of epoxy resins.
Download or read book Bio Based Polymers and Composites written by Richard Wool and published by Elsevier. This book was released on 2011-08-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bio-Based Polymers and Composites is the first book systematically describing the green engineering, chemistry and manufacture of biobased polymers and composites derived from plants. This book gives a thorough introduction to bio-based material resources, availability, sustainability, biobased polymer formation, extraction and refining technologies, and the need for integrated research and multi-disciplinary working teams. It provides an in-depth description of adhesives, resins, plastics, and composites derived from plant oils, proteins, starches, and natural fibers in terms of structures, properties, manufacturing, and product performance. This is an excellent book for scientists, engineers, graduate students and industrial researchers in the field of bio-based materials.* First book describing the utilization of crops to make high performance plastics, adhesives, and composites* Interdisciplinary approach to the subject, integrating genetic engineering, plant science, food science, chemistry, physics, nano-technology, and composite manufacturing.* Explains how to make green materials at low cost from soyoil, proteins, starch, natural fibers, recycled newspapers, chicken feathers and waste agricultural by-products.
Download or read book Bio Based Epoxy Polymers Blends and Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-01-07 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art overview on bioepoxy polymers as well as their blends and composites -- covering all aspects from fundamentals to applications! Bioepoxy polymers is an emerging area and have attracted more and more attention due to their biodegradability and good thermo-mechanical performance. In recent years, research progress has been made in synthesis, processing, characterization, and applications of bioepoxy blends and composites. Bioepoxy polymers are very promising candidates to replace the traditional thermosetting nonbiodegradable polymers. Bio-Based Epoxy Polymers, Blends and Composites summaries recent research progress on bioepoxy polymers as well as their blends and composites. It covers aspects from synthesis, processing, various characterization techniques to broad spectrum of applications. It provides a correlation of physical properties with macro, micro and nanostructures of the materials. Moreover, research trends, future directions, and opportunities are also discussed. Attracts attention: Bioepoxy polymers are environmentally friendly and considered as a promising candidate to replace the traditional thermosetting nonbiodegradable polymers Highly application-oriented: Bioepoxy polymers can be used in a broad range of applications such as polymer foams, construction, aerospace, automobiles, self-healing systems One-stop reference: Covers all aspects of bioepoxy polymer, their blends and composites, such as synthesis, properties, processing, characterization and applications Broad audience: Attracts attention from both academia and industry
Download or read book Multifunctional Epoxy Resins written by Nishar Hameed and published by Springer Nature. This book was released on 2023-01-01 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consolidates information about multifunctional epoxy as a frontier material, its composites, engineering and applications in a very detailed manner that encompasses the entire spectrum of up-to-date literature citations, current market trends and patents. It highlights latest experimental and theoretical studies on the atypical properties of epoxy resins such as self-healing, thermally and electrically conductivity; and its applications in devices where there is reliance on unsustainable sourced inorganic materials with comparable properties. It caters to polymer chemists, physicists and engineers who are interested in the field of next generation epoxy polymers.
Download or read book Incorporating Sustainable Practice in Mechanics and Structures of Materials written by Sam Fragomeni and published by CRC Press. This book was released on 2010-11-18 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating Sustainable Practice in Mechanics of Structures and Materials is a collection of peer-reviewed papers presented at the 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM21, Victoria, University, Melbourne, Australia, 7th 10th of December 2010). The contributions from academics, researchers and practisin
