Download or read book Vector Control of Induction Motor Using MATLAB written by Langsi Yao and published by LAP Lambert Academic Publishing. This book was released on 2012-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, vector control of induction motor drives are increasingly employed in industrial drive systems, motor works on best performance at certain voltage and frequency for certain loads. This project describes a generalized model of the three-phase induction motor by using vector control method and its computer simulation using MATLAB/SIMULINK, it presents the advances made in vector control as applied to high performance AC motor drives. By using this application, it can achieve speed control by controlling the reference speed value and torque value to keep the electromagnetic torque at a constant value. Machine models in d-q representation, implementation issues with AC induction motor, inverters and converters, parameter effects for induction motor vector control are dealt with and simulation results from the project are presented and discussed by computational calculation and graphs to support this theory. The large scope in this model can lead the algorithm designers to direct their efforts to the promising areas and avoid impossible tasks. From this project, the readers can approximately understand the principle of vector control in three-phase AC induction motor drive.

Download or read book Modeling and Control of AC Machine Using Matlab r Simulink written by Mourad Boufadene and published by . This book was released on 2022-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces electrical machine modeling and control for electrical engineering and science to graduate, undergraduate students as well as researchers, who are working on modeling and control of electrical machines. It targets electrical engineering students who have no time to derive mathematical equations for electrical machines in particular induction machine (IM) and doubly fed induction machines (DFIM). The main focus is on the application of field oriented control technique to induction motor (IM) and doubly fed induction motor (DFIM) in details, and since the induction motors have many drawback using this technique, therefore the application of a nonlinear control technique (feedback linearization) is applied to a reduced order model of DFIM to enhance the performance of doubly fed induction motor. Features Serves as text book for electrical motor modeling, simulation and control; especially modeling of induction motor and doubly fed induction motor using different frame of references. Vector control (field oriented control) is given in more detailed, and is applied to induction motor. A nonlinear controller is applied to a reduced model of an doubly induction motor associated with a linear observer to estimate the unmeasured load torque, which is used to enhance the performance of the vector control to doubly fed induction motor. Access to the full MATLAB/SIMULINK blocks for simulation and control.

Download or read book Vector Control of an AC Machine Using Matlab Simulink written by Boufadene Mourad and published by . This book was released on 2017-07-18 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Dynamical Model of Doubly Fed Induction Motor 31.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 31.2 Mathematical model of doubly fed induction motor . . . . 41.2.1 Mechanical equations . . . . . . . . . . . . . . . . 61.2.2 State space model of DFIM . . . . . . . . . . . . . 71.3 Matlab Simulation . . . . . . . . . . . . . . . . . . . . . . 92 Field oriented control of a doubly fed induction machine 132.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 132.1.1 Field oriented control principle . . . . . . . . . . . 142.2 Mathematical model of doubly fed inducton motor . . . . 152.3 Field oriented control . . . . . . . . . . . . . . . . . . . . 162.4 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . 182.4.1 currents controller parameters . . . . . . . . . . . . 182.4.2 Speed controllers parameters . . . . . . . . . . . . 192.5 Matlab Simulink Block of The eld Oriented Control . . . 212.6 Simulations and results . . . . . . . . . . . . . . . . . . . 222.6.1 Performance of FOC . . . . . . . . . . . . . . . . . 232.7 Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . 26A Doubly fed induction machine matlab code 31A.1 Matlab s-function for the doubly fed induction motor . . . 31B Doubly Fed Induction Motor Parameters

Download or read book Modeling and Control of AC Machine using MATLAB SIMULINK written by Mourad Boufadene and published by CRC Press. This book was released on 2018-12-20 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces electrical machine modeling and control for electrical engineering and science to graduate, undergraduate students as well as researchers, who are working on modeling and control of electrical machines. It targets electrical engineering students who have no time to derive mathematical equations for electrical machines in particular induction machine (IM) and doubly fed induction machines (DFIM). The main focus is on the application of field oriented control technique to induction motor (IM) and doubly fed induction motor (DFIM) in details, and since the induction motors have many drawback using this technique, therefore the application of a nonlinear control technique (feedback linearization) is applied to a reduced order model of DFIM to enhance the performance of doubly fed induction motor. Features Serves as text book for electrical motor modeling, simulation and control; especially modeling of induction motor and doubly fed induction motor using different frame of references. Vector control (field oriented control) is given in more detailed, and is applied to induction motor. A nonlinear controller is applied to a reduced model of an doubly induction motor associated with a linear observer to estimate the unmeasured load torque, which is used to enhance the performance of the vector control to doubly fed induction motor. Access to the full MATLAB/SIMULINK blocks for simulation and control.

Download or read book Modeling and Control of AC Machine using MATLAB SIMULINK written by Mourad Boufadene and published by CRC Press. This book was released on 2018-12-20 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces electrical machine modeling and control for electrical engineering and science to graduate, undergraduate students as well as researchers, who are working on modeling and control of electrical machines. It targets electrical engineering students who have no time to derive mathematical equations for electrical machines in particular induction machine (IM) and doubly fed induction machines (DFIM). The main focus is on the application of field oriented control technique to induction motor (IM) and doubly fed induction motor (DFIM) in details, and since the induction motors have many drawback using this technique, therefore the application of a nonlinear control technique (feedback linearization) is applied to a reduced order model of DFIM to enhance the performance of doubly fed induction motor. Features Serves as text book for electrical motor modeling, simulation and control; especially modeling of induction motor and doubly fed induction motor using different frame of references. Vector control (field oriented control) is given in more detailed, and is applied to induction motor. A nonlinear controller is applied to a reduced model of an doubly induction motor associated with a linear observer to estimate the unmeasured load torque, which is used to enhance the performance of the vector control to doubly fed induction motor. Access to the full MATLAB/SIMULINK blocks for simulation and control.

Download or read book Applied Intelligent Control of Induction Motor Drives written by Tze Fun Chan and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction motors are the most important workhorses in industry. They are mostly used as constant-speed drives when fed from a voltage source of fixed frequency. Advent of advanced power electronic converters and powerful digital signal processors, however, has made possible the development of high performance, adjustable speed AC motor drives. This book aims to explore new areas of induction motor control based on artificial intelligence (AI) techniques in order to make the controller less sensitive to parameter changes. Selected AI techniques are applied for different induction motor control strategies. The book presents a practical computer simulation model of the induction motor that could be used for studying various induction motor drive operations. The control strategies explored include expert-system-based acceleration control, hybrid-fuzzy/PI two-stage control, neural-network-based direct self control, and genetic algorithm based extended Kalman filter for rotor speed estimation. There are also chapters on neural-network-based parameter estimation, genetic-algorithm-based optimized random PWM strategy, and experimental investigations. A chapter is provided as a primer for readers to get started with simulation studies on various AI techniques. Presents major artificial intelligence techniques to induction motor drives Uses a practical simulation approach to get interested readers started on drive development Authored by experienced scientists with over 20 years of experience in the field Provides numerous examples and the latest research results Simulation programs available from the book's Companion Website This book will be invaluable to graduate students and research engineers who specialize in electric motor drives, electric vehicles, and electric ship propulsion. Graduate students in intelligent control, applied electric motion, and energy, as well as engineers in industrial electronics, automation, and electrical transportation, will also find this book helpful. Simulation materials available for download at www.wiley.com/go/chanmotor

Download or read book High Performance Control of AC Drives with Matlab Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.

Download or read book Vector Control of AC Drives written by Syed A. Nasar and published by Routledge. This book was released on 2017-11-22 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternating current (AC) induction and synchronous machines are frequently used in variable speed drives with applications ranging from computer peripherals, robotics, and machine tools to railway traction, ship propulsion, and rolling mills. The notable impact of vector control of AC drives on most traditional and new technologies, the multitude of practical configurations proposed, and the absence of books treating this subject as a whole with a unified approach were the driving forces behind the creation of this book. Vector Control of AC Drives examines the remarkable progress achieved worldwide in vector control from its introduction in 1969 to the current technology. The book unifies the treatment of vector control of induction and synchronous motor drives using the concepts of general flux orientation and the feed-forward (indirect) and feedback (direct) voltage and current vector control. The concept of torque vector control is also introduced and applied to all AC motors. AC models for drive applications developed in complex variables (space phasors), both for induction and synchronous motors, are used throughout the book. Numerous practical implementations of vector control are described in considerable detail, followed by representative digital simulations and test results taken from the recent literature. Vector Control of AC Drives will be a welcome addition to the reference collections of electrical and mechanical engineers involved with machine and system design.

Download or read book High Performance Control of AC Drives with Matlab Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.

Download or read book High Performance Control of AC Drives with Matlab Simulink Models written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2012-04-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to understanding AC machines with exhaustive simulation models to practice design and control Nearly seventy percent of the electricity generated worldwide is used by electrical motors. Worldwide, huge research efforts are being made to develop commercially viable three- and multi-phase motor drive systems that are economically and technically feasible. Focusing on the most popular AC machines used in industry – induction machine and permanent magnet synchronous machine – this book illustrates advanced control techniques and topologies in practice and recently deployed. Examples are drawn from important techniques including Vector Control, Direct Torque Control, Nonlinear Control, Predictive Control, multi-phase drives and multilevel inverters. Key features include: systematic coverage of the advanced concepts of AC motor drives with and without output filter; discussion on the modelling, analysis and control of three- and multi-phase AC machine drives, including the recently developed multi-phase-phase drive system and double fed induction machine; description of model predictive control applied to power converters and AC drives, illustrated together with their simulation models; end-of-chapter questions, with answers and PowerPoint slides available on the companion website www.wiley.com/go/aburub_control This book integrates a diverse range of topics into one useful volume, including most the latest developments. It provides an effective guideline for students and professionals on many vital electric drives aspects. It is an advanced textbook for final year undergraduate and graduate students, and researchers in power electronics, electric drives and motor control. It is also a handy tool for specialists and practicing engineers wanting to develop and verify their own algorithms and techniques.

Download or read book Advances in Communication Signal Processing VLSI and Embedded Systems written by Shubhakar Kalya and published by Springer Nature. This book was released on 2019-11-30 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected peer-reviewed papers from the International Conference on VLSI, Signal Processing, Power Systems, Illumination and Lighting Control, Communication and Embedded Systems (VSPICE-2019). The contents are divided into five broad topics - VLSI and embedded systems, signal processing, power systems, illumination and control, and communication and networking. The book focuses on the latest innovations, trends, and challenges encountered in the different areas of electronics and communication, and electrical engineering. It also offers potential solutions and provides an insight into various emerging areas such as image fusion, bio-sensors, and underwater sensor networks. This book can prove to be useful for academics and professionals interested in the various sub-fields of electronics and communication engineering.

Download or read book Development of Adaptive Speed Observers for Induction Machine System Stabilization written by Ahmed A. Zaki Diab and published by Springer Nature. This book was released on 2020-01-03 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of an adaptive state observer using a mathematical model to achieve high performance for sensorless induction motor drives. This involves first deriving an expression for a modified gain rotor flux observer with a parameter adaptive scheme to estimate the motor speed accurately and improve the stability and performance of sensorless vector-controlled induction motor drives. This scheme is then applied to the controls of a photovoltaic-motor water-pumping system, which results in improved dynamic performance under different operating conditions. The book also presents a robust speed controller design for a sensorless vector-controlled induction motor drive system based on H∞ theory, which overcomes the problems of the classical controller.

Download or read book Control of Induction Motors written by Andrzej Trzynadlowski and published by Academic Press. This book was released on 2001 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reference source for practising engineers specializing in electric power engineering and industrial electronics. It begins with the basic dynamic models of induction motors and progresses to low- and high-performance drive systems.

Download or read book Simulation and Design of a Vector Control Scheme to Provide Torque Control for a Three Phase Induction Motor written by Derek N. Barboza and published by . This book was released on 1994 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Artificial Intelligence and Evolutionary Computations in Engineering Systems written by Subhransu Sekhar Dash and published by Springer. This book was released on 2017-07-11 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume is a collection of high-quality peer-reviewed research papers presented in the International Conference on Artificial Intelligence and Evolutionary Computation in Engineering Systems (ICAIECES 2016) held at SRM University, Chennai, Tamilnadu, India. This conference is an international forum for industry professionals and researchers to deliberate and state their research findings, discuss the latest advancements and explore the future directions in the emerging areas of engineering and technology. The book presents original work and novel ideas, information, techniques and applications in the field of communication, computing and power technologies.

Download or read book Vector Control and Dynamics of AC Drives written by D. W. Novotny and published by Oxford University Press. This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric drive systems is an area of great change and increasing commercial importance in industry today. Written by experts in the field, this book takes account of recent developments. These have been due largely to the advances in power electronics and computer control; in turn, they have made possible the implementation of a.c. drive systems, in place of d.c. Topics include inverter machine dynamics; constant speed behavior and the development of conventional equivalent circuits; vector controlled systems; and current regulators.

Download or read book Renewable Power for Sustainable Growth written by Atif Iqbal and published by Springer Nature. This book was released on 2021-04-20 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the International Conference on Renewable Power (ICRP 2020), held during 13–14 July 2020 in Rajouri, Jammu, India. The book covers different topics of renewable energy sources in modern power systems. The book focusses on smart grid technologies and applications, renewable power systems including solar PV, solar thermal, wind, power generation, transmission and distribution, transportation electrification and automotive technologies, power electronics and applications in renewable power system, energy management and control system, energy storage in modern power system, active distribution network, artificial intelligence in renewable power systems, and cyber-physical systems and Internet of things in smart grid and renewable power.