Download or read book Various and Ingenious Machines Volume One Power Generation and Transport written by Bryan Lawton and published by BRILL. This book was released on 2023-03-13 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work describes the pre-industrial history of mechanical engineering and covers power generation, transport, manufacturing, and weapons technology. Important items are discussed in each section and performance data are presented in easily understood graphical format using over 800 illustrations. The print edition is available as a set of two volumes (9789004136090).
Download or read book Various and Ingenious Machines Volume Two Manufacturing and Weapons Technology written by Bryan Lawton and published by BRILL. This book was released on 2023-04-17 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work describes the pre-industrial history of mechanical engineering and covers power generation, transport, manufacturing, and weapons technology. Important items are discussed in each section and performance data are presented in easily understood graphical format using over 800 illustrations. The print edition is available as a set of two volumes (9789004136090).
Download or read book Wind Water Work written by Adam Lucas and published by BRILL. This book was released on 2006-01-01 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the most comprehensive empirical study to date of the social and technical aspects of milling during the ancient and medieval periods. Drawing on the latest archaeological evidence and historical studies, the book examines the chronological development and technical details of handmills, beast mills, watermills and windmills from the first millennium BCE to c. 1500. It discusses the many and varied uses to which mills were turned in the civilisations of Rome, China, Islam and Europe, and the many types of mill that existed. The book also includes comparative regional studies of the social and economic significance of milling, and tackles several important historiographical issues, such as whether technological stagnation was a characteristic of late Antiquity, whether there was an "industrial revolution" in the European Middle Ages based on waterpower, and how contemporary studies in the social shaping of technology can shed light on the study of pre-modern technology.
Download or read book Early Power and Transport written by Bryan Lawton and published by American Society of Mechanical Engineers. This book was released on 2017 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bryan Lawton received ASME's 2016 Historian Award for his acclaimed book, Various and Ingenious Machines, a 1300 page, two-volume work, which provides a well-researched history of mechanical engineering worldwide, from prehistory to the beginnnings of industrialization. ASME has published a smaller, more affordable version to serve as a guide.
Download or read book Finding the Limits of the Limes written by Philip Verhagen and published by Springer. This book was released on 2019-02-08 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book demonstrates the application of simulation modelling and network analysis techniques in the field of Roman studies. It summarizes and discusses the results of a 5-year research project carried out by the editors that aimed to apply spatial dynamical modelling to reconstruct and understand the socio-economic development of the Dutch part of the Roman frontier (limes) zone, in particular the agrarian economy and the related development of settlement patterns and transport networks in the area. The project papers are accompanied by invited chapters presenting case studies and reflections from other parts of the Roman Empire focusing on the themes of subsistence economy, demography, transport and mobility, and socio-economic networks in the Roman period. The book shows the added value of state-of-the-art computer modelling techniques and bridges computational and conventional approaches. Topics that will be of particular interest to archaeologists are the question of (forced) surplus production, the demographic and economic effects of the Roman occupation on the local population, and the structuring of transport networks and settlement patterns. For modellers, issues of sensitivity analysis and validation of modelling results are specifically addressed. This book will appeal to students and researchers working in the computational humanities and social sciences, in particular, archaeology and ancient history.
Download or read book A Tale of Three Thirsty Cities written by Jaime-Chaim Shulman and published by BRILL. This book was released on 2017-11-01 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: In A Tale of Three Thirsty Cities: The Innovative Water Supply Systems of Toledo, London and Paris in the Second Half of the Sixteenth Century, Chaim Shulman presents an analysis of three projects of urban water supply systems carried out between 1560s–1610s. The technical and economic differences between these projects resulted from external conditions not directly related to the water supply problem. Although the same basic technology was apparently available at the time in all cases, the geographical, engineering, entrepreneurial and cultural nature of each region differed. The inhabitants’ wellbeing improvement achieved varied accordingly. Much broader insights are drawn on the policies of the three monarchies regarding the initiative of and support for grand scale public works in general.
Download or read book Using the Engineering Literature written by Bonnie A. Osif and published by CRC Press. This book was released on 2006-08-23 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of engineering is becoming increasingly interdisciplinary, and there is an ever-growing need for engineers to investigate engineering and scientific resources outside their own area of expertise. However, studies have shown that quality information-finding skills often tend to be lacking in the engineering profession. Using the Engineerin
Download or read book The Cloud Revolution written by Mark P. Mills and published by Encounter Books. This book was released on 2021-11-02 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conventional wisdom on how technology will change the future is wrong. Mark Mills lays out a radically different and optimistic vision for what’s really coming. The mainstream forecasts fall into three camps. One considers today as the “new normal,” where ordering a ride or food on a smartphone or trading in bitcoins is as good as it’s going to get. Another foresees a dystopian era of widespread, digitally driven job- and business-destruction. A third believes that the only technological revolution that matters will be found with renewable energy and electric cars. But according to Mills, a convergence of technologies will instead drive an economic boom over the coming decade, one that historians will characterize as the “Roaring 2020s.” It will come not from any single big invention, but from the confluence of radical advances in three primary technology domains: microprocessors, materials, and machines. Microprocessors are increasingly embedded in everything. Materials, from which everything is built, are emerging with novel, almost magical capabilities. And machines, which make and move all manner of stuff, are undergoing a complementary transformation. Accelerating and enabling all of this is the Cloud, history’s biggest infrastructure, which is itself based on the building blocks of next-generation microprocessors and artificial intelligence. We’ve seen this pattern before. The technological revolution that drove the great economic expansion of the twentieth century can be traced to a similar confluence, one that was first visible in the 1920s: a new information infrastructure (telephony), new machines (cars and power plants), and new materials (plastics and pharmaceuticals). Single inventions don’t drive great, long-cycle booms. It always takes convergent revolutions in technology’s three core spheres—information, materials, and machines. Over history, that’s only happened a few times. We have wrung much magic from the technologies that fueled the last long boom. But the great convergence now underway will ignite the 2020s. And this time, unlike any previous historical epoch, we have the Cloud amplifying everything. The next long boom starts now.
Download or read book THERMAL POWER PLANT AND CO GENERATION PLANNING Volume I written by and published by EOLSS Publications. This book was released on 2010-10-05 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes are a component of Encyclopedia of Water Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. These volumes discuss on Large-scale power production which requires the use of heat in a thermodynamic cycle to produce mechanical work, which in turn can generate electrical energy. Substantial quantities of fuel are hence required to sustain the production of heat. Fuel may be combustible, as in the case of fossil fuels such as coal and oil, or fissionable, as in the case of nuclear fuels such as uranium. All fuels produce waste products, which must be discharged, dumped, or stored. Such products range from innocuous water vapor to hazardous nuclear waste. These volumes are aimed at the following five major target audiences: University and College Students Educators, Professional Practitioners, Research Personnel and Policy and Decision Makers
Download or read book Choice written by and published by . This book was released on 2005 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Power Plants Volume I written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers.
Download or read book Metabolism and Medicine written by Brian Fertig and published by CRC Press. This book was released on 2022-01-25 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chronic disease states of aging should be viewed through the prism of metabolism and biophysical processes at all levels of physiological organization present in the human body. This book describes the building blocks of understanding from a reasonable but not high-level technical language viewpoint, employing the perspective of a clinical physician. It brings together concepts from five specific branches of physics relevant to biology and medicine, namely, biophysics, classical electromagnetism, thermodynamics, systems biology and quantum mechanics. Key Features: Broad and up-to-date overview of the field of metabolism, especially connecting the spectrum of topics that range from modern physical underpinnings with cell biology to clinical practice. Provides a deeper basic science and interdisciplinary understanding of biological systems that broaden the perspectives and therapeutic problem solving. Introduces the concept of the Physiological Fitness Landscape, which is inspired by the physics of phase transitions This first volume in a two-volume set, primarily targets an audience of clinical and science students, biomedical researchers and physicians who would benefit from understanding each other’s language.
Download or read book NexGen Technologies for Mining and Fuel Industries Volume I and II written by Pradeep K. Singh and published by Allied Publishers. This book was released on 2017-03-06 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in these two volumes were presented at the International Conference on “NexGen Technologies for Mining and Fuel Industries” [NxGnMiFu-2017] in New Delhi from February 15-17, 2017, organized by CSIR-Central Institute of Mining and Fuel Research, Dhanbad, India. The proceedings include the contributions from authors across the globe on the latest research on mining and fuel technologies. The major issues focused on are: Innovative Mining Technology, Rock Mechanics and Stability Analysis, Advances in Explosives and Blasting, Mine Safety and Risk Management, Computer Simulation and Mine Automation, Natural Resource Management for Sustainable Development, Environmental Impacts and Remediation, Paste Fill Technology and Waste Utilisation, Fly Ash Management, Clean Coal Initiatives, Mineral Processing and Coal Beneficiation, Quality Coal for Power Generation and Conventional and Non-conventional Fuels and Gases. This collection of contemporary articles contains unique knowledge, case studies, ideas and insights, a must-have for researchers and engineers working in the areas of mining technologies and fuel sciences.
Download or read book Blindside written by Francis Fukuyama and published by Rowman & Littlefield. This book was released on 2008-01-27 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: A host of catastrophes, natural and otherwise, as well as some pleasant surprises—like the sudden end of the cold war without a shot being fired—have caught governments and societies unprepared many times in recent decades. September 11 is only the most obvious recent example among many unforeseen events that have changed, even redefined our lives. We have every reason to expect more such events in future. Several kinds of unanticipated scenarios—particularly those of low probability and high impact—have the potential to escalate into systemic crises. Even positive surprises can be major policy challenges. Anticipating and managing low-probability events is a critically important challenge to contemporary policymakers, who increasingly recognize that they lack the analytical tools to do so. Developing such tools is the focus of this insightful and perceptive volume, edited by renowned author Francis Fukuyama and sponsored by The American Interest magazine. Bl indside is organized into four main sections. "Thinking about Strategic Surprise" addresses the psychological and institutional obstacles that prevent leaders from planning for low-probability tragedies and allocating the necessary resources to deal with them. The following two sections pinpoint the failures—institutional as well as personal—that allowed key historical events to take leaders by surprise, and examine the philosophies and methodologies of forecasting. In "Pollyana vs. Cassandra," for example, James Kurth and Gregg Easterbrook debate the future state of the world going forward. Mitchell Waldrop explores why technology forecasting is so poor and why that is likely to remain the case. In the book's final section, "What Could Be," internationally renowned authorities discuss low probability, high-impact contingencies in their area of expertise. For example, Scott Barrett looks at emerging infectious diseases, while Gal Luft and Anne Korin discuss energy security. How can we avoid
Download or read book The Early History of Mechanical Engineering written by Bryan Lawton and published by Technology and Change in Histo. This book was released on 2004 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work describes the pre-industrial history of mechanical engineering and covers power generation, transport, manufacturing, and weapons technology. Important items are discussed in each section and performance data are presented in easily understood graphical format using over 800 illustrations.
Download or read book The New Walford Guide to Reference Resources written by Ray Lester and published by . This book was released on 2005 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: The New Walford highlights the best resources to use when undertaking a search for accurate and relevant information, saving you precious time and effort. For those looking for a selective and evaluative reference resource that really delivers on its promise, look no further. In addition to print sources, The New Walford naturally covers an extensive range of e-reference sources such as digital databanks, digital reference services, electronic journal collections, meta-search engines, networked information services, open archives, resource discovery services and websites of premier organizations in both the public and private sectors. But rather than supplying a list of all available known resources as a web search engine might, The New Walford subject specialists have carefully selected and evaluated available resources to provide a definitive list of the most appropriate and useful. With an emphasis on quality and sustainability, the subject specialists have been careful to assess the differing ways that information is framed and communicated in different subject areas. As a result the resource evaluations in each subject area are prefaced by an introductory overview of the structure of the relevant literature. This ensures that The New Walford is clear, easy-to-use and intuitive. - Publisher.
Download or read book Engineering Journal written by and published by . This book was released on 1925 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol. 7, no.7, July 1924, contains papers prepared by Canadian engineers for the first World power conference, July, 1924.
