Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 24 (thesis year 1979) a total of 10,033 theses titles from 26 Canadian and 215 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 24 reports these submitted in 1979, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Canadian Theses written by National Library of Canada and published by . This book was released on 1976 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1980 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1981 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Abstracts written by and published by . This book was released on 1987 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Science Technology Index written by and published by . This book was released on 1996 with total page 1628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of Chemical Thermodynamics written by and published by . This book was released on 1984 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.
Download or read book Purification of Laboratory Chemicals written by W.L.F. Armarego and published by Elsevier. This book was released on 2003-03-07 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fifth edition, the book has been updated to include more detailed descriptions of new or more commonly used techniques since the last edition as well as remove those that are no longer used, procedures which have been developed recently, ionization constants (pKa values) and also more detail about the trivial names of compounds.In addition to having two general chapters on purification procedures, this book provides details of the physical properties and purification procedures, taken from literature, of a very extensive number of organic, inorganic and biochemical compounds which are commercially available. This is the only complete source that covers the purification of laboratory chemicals that are commercially available in this manner and format.* Complete update of this valuable, well-known reference* Provides purification procedures of commercially available chemicals and biochemicals* Includes an extremely useful compilation of ionisation constants
Download or read book Hansen Solubility Parameters written by Charles M. Hansen and published by CRC Press. This book was released on 2007-06-15 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hansen solubility parameters (HSPs) are used to predict molecular affinities, solubility, and solubility-related phenomena. Revised and updated throughout, Hansen Solubility Parameters: A User's Handbook, Second Edition features the three Hansen solubility parameters for over 1200 chemicals and correlations for over 400 materials including p
Download or read book Solubility data series written by A. S. Kertes and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry for Pharmacy Students written by Professor Satyajit D. Sarker and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book has succeeded in covering the basic chemistry essentials required by the pharmaceutical science student... the undergraduate reader, be they chemist, biologist or pharmacist will find this an interesting and valuable read." –Journal of Chemical Biology, May 2009 Chemistry for Pharmacy Students is a student-friendly introduction to the key areas of chemistry required by all pharmacy and pharmaceutical science students. The book provides a comprehensive overview of the various areas of general, organic and natural products chemistry (in relation to drug molecules). Clearly structured to enhance student understanding, the book is divided into six clear sections. The book opens with an overview of general aspects of chemistry and their importance to modern life, with particular emphasis on medicinal applications. The text then moves on to a discussion of the concepts of atomic structure and bonding and the fundamentals of stereochemistry and their significance to pharmacy- in relation to drug action and toxicity. Various aspects of aliphatic, aromatic and heterocyclic chemistry and their pharmaceutical importance are then covered with final chapters looking at organic reactions and their applications to drug discovery and development and natural products chemistry. accessible introduction to the key areas of chemistry required for all pharmacy degree courses student-friendly and written at a level suitable for non-chemistry students includes learning objectives at the beginning of each chapter focuses on the physical properties and actions of drug molecules
Download or read book Heat Capacities and Entropies of Organic Compounds in the Condensed Phase written by E. S. Domalski and published by American Institute of Physics. This book was released on 1984 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Phase Extraction written by Colin F. Poole and published by Elsevier. This book was released on 2019-08-29 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid Phase Extraction thoroughly presents both existing and new techniques in liquid phase extraction. It not only provides all information laboratory scientists need for choosing and utilizing suitable sample preparation procedures for any kind of sample, but also showcases the contemporary uses of sample preparation techniques in the most important industrial and academic project environments, including countercurrent chromatography, pressurized-liquid extraction, single-drop Microextraction, and more. Written by recognized experts in their respective fields, it serves as a one-stop reference for those who need to know which technique to choose for liquid phase extraction. Used in conjunction with a similar release, Solid Phase Extraction, it allows users to master this crucial aspect of sample preparation. - Defines the current state-of-the-art in extraction techniques and the methods and procedures for implementing them in laboratory practice - Includes extensive referencing that facilitates the identification of key information - Aimed at both entry-level scientists and those who want to explore new techniques and methods
Download or read book Catalyst Separation Recovery and Recycling written by David J. Cole-Hamilton and published by Springer Science & Business Media. This book was released on 2006-01-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at new ways of tackling the problem of separating reaction products from homogeneous catalytic solutions. The new processes involve low leaching supported catalysts, soluble supports such as polymers and dendrimers and unusual solvents such as water, fluorinated organics, ionic liquids and supercritical fluids. The advantages of the different possibilities are discussed alongside suggestions for further research that will be required for commercialisation. Unlike other books, in addition to the chemistry involved, the book looks at the process design that would be required to bring the new approaches to fruition. Comparisons are given with existing processes that have already been successfully applied and examples are given where these approaches are not suitable. The book includes: - New processes for the separation of products from solutions containing homogeneous catalysts - Catalysts on insoluble or soluble supports – fixed bed catalysts - continuous flow or ultrafiltration - Biphasic systems: water - organic, fluorous - organic, ionic liquid – organic, supercritical fluids (monophasic or biphasic with water, organic or ionic liquid) - Comparisons with current processes involving atmospheric or low temperature distillation - Consideration of Chemistry and Process Design - Advantages and disadvantages of each process exposed - Consideration of what else is need for commercialisation
Download or read book Advances in Forensic Applications of Mass Spectrometry written by Jehuda Yinon and published by CRC Press. This book was released on 2003-12-29 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in analytical instrumentation have had an enormous influence on forensic analysis. The mass spectrometer is now an integral part of every forensic laboratory, resulting in greater analytical accuracy, more reliable identification, and lower detection limits. As the instrumental method of choice among forensic analysts, the mass
