Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology. - Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies - Learn and review the applicable standards and specifications from API and ISO in one convenient location - Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book Handbook of Valves and Actuators written by Brian Nesbitt and published by Elsevier. This book was released on 2011-04-19 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume.* Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained
Download or read book Developments in Valves and Actuators for Fluid Control written by D. R. Airey and published by . This book was released on 1990 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valve Selection Handbook written by Peter Smith and published by Elsevier. This book was released on 2004-01-24 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. - Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today - Details new generations of valves for offshore projects, the oil industry's fastest-growing segment - Includes numerous new products that have never before been written about in the mainstream literature
Download or read book Valve Actuators written by Chris Warnett and published by . This book was released on 2015-10-14 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book is intended as a guide for automated valve end users, engineers and valve industry professionals that need to understand valve actuators. It describes the various types of electric and fluid powered actuators in terms of design, power supplies, controls and sizing. The reader is taken through the logical steps of selecting the correct actuator for their application, including isolating, modulating and fail safe variations. There are sections on matching actuators to new valves and also retrofitting actuators to existing valves. Examples of where actuators are found in various industrial applications and a comprehensive technical appendix make this book a valuable reference manual.PREVIEWS -"An amazing job of explaining and illustrating actuators, and of course the engineering principles. We need engineering books like this: ones that explain engineering in a well written and digestible form".....Sir James Dyson"This book covers the many and varied types of actuator designs. It helps users understand the type of actuator which is suitable for a particular valve and application. This is an easy to access reference work on all you will ever need to know about valve actuators."......... Bill Whiteley, Chairman Spirax Sarco Engineering Plc and former CEO Rotork Plc."This book should be on every engineer's bookshelf that works in the process or process control industry. It provides the link between the valve and the process. The reader is led through the process of application, selection, sizing, system design and specifying of the actuator."........ Edward Stillwell, PE Control System Engineer
Download or read book Active Flow Control written by Rudibert King and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions presented at the Active Flow Control 2006 conference, held September 2006, at the Technische Universität Berlin, Germany. It contains a well balanced combination of theoretical and experimental state-of-the-art results of Active Flow Control. Coverage combines new developments in actuator technology, sensing, robust and optimal open- and closed-loop control and model reduction for control.
Download or read book Hydraulic Control Systems written by Noah Manring and published by John Wiley & Sons. This book was released on 2005-04-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique resource that demystifies the physical basics of hydraulic systems Hydraulic Control Systems offers students and professionals a reliable, complete volume of the most up-to-date hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. Hydraulic Control Systems is a powerful tool for developing a solid understanding of hydraulic control systems that will serve the practicing engineer in the field. Throughout the book, illustrative case studies highlight important topics and demonstrate how equations can be implemented and used in the real world. Featuring exercise problems at the end of every chapter, Hydraulic Control Systems presents: A useful review of fluid mechanics and system dynamics Thorough analysis of transient fluid flow forces within valves Discussions of flow ripple for both gear pumps and axial piston pumps Updated analysis of the pump control problems associated with swash plate type machines A successful methodology for hydraulic system design—starting from the load point of the system and working backward to the ultimate power source Reduced-order models and PID controllers showing control objectives of position, velocity, and effort
Download or read book Valve Handbook written by Philip Skousen and published by McGraw Hill Professional. This book was released on 2004-06-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The valve industry has become increasingly digitized over the past five years. This revised second edition reflects those developments by focusing on the latest processing plant applications for "smart valve" technology. * Updated information on testing agencies and the latest code changes Contents: Introduction to Valves * Valve Selection Criteria * Manual Valves * Control Valves * Manual Operators and Actuators * New Smart Valve Technology * Smart Valve and Positioners * Valve Sizing * Actuator Sizing * Common Valve Problems * Abbreviations of Related Organizations and Standards
Download or read book Hydraulics and Pneumatics Controls written by Shanmuga Sundaram and published by S. Chand Publishing. This book was released on 2006 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For B.E./B.Tech. students of Anna and Other Technical Universities of India
Download or read book Fluid Power Circuits and Controls written by John S. Cundiff and published by CRC Press. This book was released on 2019-12-05 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Power Circuits and Controls: Fundamentals and Applications, Second Edition, is designed for a first course in fluid power for undergraduate engineering students. After an introduction to the design and function of components, students apply what they’ve learned and consider how the component operating characteristics interact with the rest of the circuit. The Second Edition offers many new worked examples and additional exercises and problems in each chapter. Half of these new problems involve the basic analysis of specific elements, and the rest are design-oriented, emphasizing the analysis of system performance. The envisioned course does not require a controls course as a prerequisite; however, it does lay a foundation for understanding the extraordinary productivity and accuracy that can be achieved when control engineers and fluid power engineers work as a team on a fluid power design problem. A complete solutions manual is available for qualified adopting instructors.
Download or read book Actuators and Their Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-04-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: As demand has increased for new types of equipment that are more suited to the ever-evolving world of industry, demand for both new and traditional types of actuators has soared. From automotive and aeronautical to biomedical and robotics, engineers are constantly developing actuating devices that are adapted to their particular needs in their particular field, and actuators are used in almost every field of engineering that there is. This volume not only lays out the fundamentals of actuators, such as how they operate, the different kinds, and their various applications, but it also informs the engineer or student about the new actuators that are being developed and the state-of-the-art of actuators. Edited and written by highly experienced and well-respected engineers with a deep understanding of their subject, there is no other volume on actuators that is more current or comprehensive. Whether as a guide for the latest innovations in actuators, a refresher reference work for the veteran engineer, or an introductory text for the engineering student, this is a must-have for any engineer's or university's library. Covering the theory and the practical applications, this breakthrough volume is a "one stop shop" for any engineer or student interested in actuators.
Download or read book Instrument Engineers Handbook Volume Two written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest update to Bela Liptak's acclaimed "bible" of instrument engineering is now available. Retaining the format that made the previous editions bestsellers in their own right, the fourth edition of Process Control and Optimization continues the tradition of providing quick and easy access to highly practical information. The authors are practicing engineers, not theoretical people from academia, and their from-the-trenches advice has been repeatedly tested in real-life applications. Expanded coverage includes descriptions of overseas manufacturer's products and concepts, model-based optimization in control theory, new major inventions and innovations in control valves, and a full chapter devoted to safety. With more than 2000 graphs, figures, and tables, this all-inclusive encyclopedic volume replaces an entire library with one authoritative reference. The fourth edition brings the content of the previous editions completely up to date, incorporates the developments of the last decade, and broadens the horizons of the work from an American to a global perspective. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Valve Handbook 3rd Edition written by Philip L. Skousen and published by McGraw Hill Professional. This book was released on 2011-04-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, up-to-date coverage of valves for the process industry Revised to include details on the latest technologies, Valve Handbook, Third Edition, discusses design, performance, selection, operation, and application. This updated resource features a new chapter on the green technology currently employed by the valve industry, as well as an overview of the major environmental global standards that process plants are expected to meet. The book also contains new information on: Valves used in the wastewater industry Applying emergency shutdown (ESO) valves Recent changes to shutoff classifications Valves specified for the nuclear industry The procurement process for the Nuclear Stamp (N-Stamp) The emergence of wireless technology and its application to current smart technology Characteristics of high-performance hydraulic fluid Valve Handbook, Third Edition, covers: Valve selection criteria Manual valves Check valves Pressure relief valves Control valves Manual operators and actuators Smart valves and positioners Valve and actuator sizing Green valve technology and application Common valve problems Valve purchasing issues
Download or read book Trends in Intelligent Robotics Automation and Manufacturing written by S.G. Poonambalam and published by Springer. This book was released on 2012-11-28 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the First International Conference on Intelligent Robotics and Manufacturing, IRAM 2012, held in Kuala Lumpur, Malaysia, in November 2012. The 64 revised full papers included in this volume were carefully reviewed and selected from 102 initial submissions. The papers are organized in topical sections named: mobile robots, intelligent autonomous systems, robot vision and robust, autonomous agents, micro, meso and nano-scale automation and assembly, flexible manufacturing systems, CIM and micro-machining, and fabrication techniques.
Download or read book How to get your Marine Engineer s Class 3 Certificate of Competency written by Scott Fratcher and published by Lulu.com. This book was released on with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gaseous Flow written by C. E. Normand and published by . This book was released on 1956 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control valve Selection and Sizing written by Les Driskell and published by . This book was released on 1983 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
