Download or read book Validation of Computerized Analytical Systems written by Ludwig Huber and published by CRC Press. This book was released on 2023-04-28 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation of Computerized Analytical and Networked Systems provides the definitive rationales, logic, and methodology for validation of computerized analytical systems. Whether you are involved with formulation or analytical development laboratories, chemical or microbiological quality control laboratories, LIMS installations, or any aspect of robotic in a healthcare laboratory, this book furnishes complete validation details. International and FDA regulations and requirements are discussed and juxtaposed with numerous practical examples that show you how to cost-effectively and efficiently accomplish validation acceptable to FDA GCP/GLP/GMP, NAMAS, and EN45001 standards. The templates included provide documentation examples and the many checklists found throughout the book assure that all aspects of covered in a logical sequence. The chapters describe and explain such topics as the Product Life Cycle revalidation, change control, documentation requirements, qualifications, testing, data validation and traceability, inspection, SOPs, and many other that help streamline the validation process.

Download or read book Validation of Computerized Analytical and Networked Systems written by Ludwig Huber and published by CRC Press. This book was released on 2001-10-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: You cannot afford to be in the dark when it comes to validating your analytical systems and lab software. Written by international laboratory and compliance expert Dr. Ludwig Huber, Validation of Computerized Analytical and Networked Systems is an invaluable validation tool. Covering the initial writing of the validation plan through implementation, testing, and installation qualification, through ongoing calibration, performance qualification, and change control, the book provides guidance throughout the entire validation process. Huber pays special attention to 21CFR Part 11 electronic records and signatures compliance, including recommendations for implementation and the scope of Part 11 for chromatographic systems. He discusses vendor assessment, covers the criteria and procedures for vendor audits, and includes vendor assessment checklists. He also explores the validation of complex networked systems and "office software" such as Macros, spreadsheets, and databases, and the operational compliance of legacy systems. The book contains everything you need to perform computer systems validation cost-effectively and in a manner acceptable to national and international regulatory agencies.

Download or read book Pharmaceutical Computer Systems Validation written by Guy Wingate and published by CRC Press. This book was released on 2016-04-19 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised to include the latest industry developments, the Second Edition presents a comprehensive overview of computer validation and verification principles and how to put them into practice. To provide the current best practice and guidance on identifying and implementing improvements for computer systems, the text extensively reviews regulations of pharmaceuticals, healthcare products, blood processing, medical devices, clinical systems, and biotechnology. Ensuring that organizations transition smoothly to the new system, this guide explains how to implement the new GMP paradigm while maintaining continuity with current practices. In addition, all 24 case studies from the previous edition have been revised to reflect the new system.

Download or read book Practical Approaches to Method Validation and Essential Instrument Qualification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2011-03-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical approaches to ensure that analytical methods and instruments meet GMP standards and requirements Complementing the authors' first book, Analytical Method Validation and Instrument Performance Verification, this new volume provides coverage of more advanced topics, focusing on additional and supplemental methods, instruments, and electronic systems that are used in pharmaceutical, biopharmaceutical, and clinical testing. Readers will gain new and valuable insights that enable them to avoid common pitfalls in order to seamlessly conduct analytical method validation as well as instrument operation qualification and performance verification. Part 1, Method Validation, begins with an overview of the book's risk-based approach to phase appropriate validation and instrument qualification; it then focuses on the strategies and requirements for early phase drug development, including validation of specific techniques and functions such as process analytical technology, cleaning validation, and validation of laboratory information management systems Part 2, Instrument Performance Verification, explores the underlying principles and techniques for verifying instrument performance—coverage includes analytical instruments that are increasingly important to the pharmaceutical industry, such as NIR spectrometers and particle size analyzers—and offers readers a variety of alternative approaches for the successful verification of instrument performance based on the needs of their labs At the end of each chapter, the authors examine important practical problems and share their solutions. All the methods covered in this book follow Good Analytical Practices (GAP) to ensure that reliable data are generated in compliance with current Good Manufacturing Practices (cGMP). Analysts, scientists, engineers, technologists, and technical managers should turn to this book to ensure that analytical methods and instruments are accurate and meet GMP standards and requirements.

Download or read book Validation of Chromatography Data Systems written by Robert McDowall and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chromatography is a major analytical technique that is used throughout research, development and manufacturing in the pharmaceutical, medical device and associated industries. To demonstrate fitness for purpose with the applicable regulations, the systems must be validated. Validation of Chromatography Data Systems: Meeting Business and Regulatory Requirements introduces the basics of computer validation. It looks in detail at the requirements throughout the life cycle of a CDS for any regulated laboratory, from its concept, through writing the user requirements specification to selecting the system, testing and operational release, including using electronic signatures. This logical and uniquely organised book provides the background to the regulatory requirements, interpretation of the regulations and documented evidence needed to support a claim that a system is validated. Development of the system, risk management, operation and finally system retirement and data migration are discussed. Case studies and practical examples are provided where appropriate. Validation of Chromatography Data Systems: Meeting Business and Regulatory Requirements is ideal for the chromatographer working in analytical laboratories in the regulated pharmaceutical, contract research, biotechnology and medical device industries seeking the practical guidance required for validating their chromatography data systems in order to meet regulatory requirements. It will also be welcomed by consultants or those in regulatory agencies.

Download or read book Analytical Method Validation and Instrument Performance Verification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2004-04-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation describes the procedures used to analyze pharmaceutical products so that the data generated will comply with the requirements of regulatory bodies of the US, Canada, Europe and Japan. Calibration of Instruments describes the process of fixing, checking or correcting the graduations of instruments so that they comply with those regulatory bodies. This book provides a thorough explanation of both the fundamental and practical aspects of biopharmaceutical and bioanalytical methods validation. It teaches the proper procedures for using the tools and analysis methods in a regulated lab setting. Readers will learn the appropriate procedures for calibration of laboratory instrumentation and validation of analytical methods of analysis. These procedures must be executed properly in all regulated laboratories, including pharmaceutical and biopharmaceutical laboratories, clinical testing laboratories (hospitals, medical offices) and in food and cosmetic testing laboratories.

Download or read book GAMP Good Practice Guide written by and published by Ispe Headquarters. This book was released on 2005-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Integrated Approach to Analytical Instrument Qualification and Computerised System Validation in Analytical Laboratories written by R. D. McDowall and published by CRC PressI Llc. This book was released on 2011 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Calibration and Validation of Analytical Methods written by Mark Stauffer and published by BoD – Books on Demand. This book was released on 2018-04-25 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to introduce the reader to current methodologies in analytical calibration and validation. This collection of contributed research articles and reviews addresses current developments in the calibration of analytical methods and techniques and their subsequent validation. Section 1, "Introduction," contains the Introductory Chapter, a broad overview of analytical calibration and validation, and a brief synopsis of the following chapters. Section 2 "Calibration Approaches" presents five chapters covering calibration schemes for some modern analytical methods and techniques. The last chapter in this section provides a segue into Section 3, "Validation Approaches," which contains two chapters on validation procedures and parameters. This book is a valuable source of scientific information for anyone interested in analytical calibration and validation.

Download or read book Development and Validation of Analytical Methods written by Christopher M. Riley and published by Elsevier. This book was released on 1996-05-29 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to validate an analytical or bioanalytical method is encountered by analysts in the pharmaceutical industry on an almost daily basis, because adequately validated methods are a necessity for approvable regulatory filings. What constitutes a validated method, however, is subject to analyst interpretation because there is no universally accepted industry practice for assay validation. This book is intended to serve as a guide to the analyst in terms of the issues and parameters that must be considered in the development and validation of analytical methods. In addition to the critical issues surrounding method validation, this book also deals with other related factors such as method development, data acquisition, automation, cleaning validation and regulatory considerations. The book is divided into three parts. Part One, comprising two chapters, looks at some of the basic concepts of method validation. Chapter 1 discusses the general concept of validation and its role in the process of transferring methods from laboratory to laboratory. Chapter 2 looks at some of the critical parameters included in a validation program and the various statistical treatments given to these parameters. Part Two (Chapters 3, 4 and 5) of the book focuses on the regulatory perspective of analytical validation. Chapter 3 discusses in some detail how validation is treated by various regulatory agencies around the world, including the United States, Canada, the European Community, Australia and Japan. This chapter also discusses the International Conference on Harmonization (ICH) treatment of assay validation. Chapters 4 and 5 cover the issues and various perspectives of the recent United States vs. Barr Laboratories Inc. case involving the retesting of samples. Part Three (Chapters 6 - 12) covers the development and validation of various analytical components of the pharmaceutical product development process. This part of the book contains specific chapters dedicated to bulk drug substances and finished products, dissolution studies, robotics and automated workstations, biotechnology products, biological samples, analytical methods for cleaning procedures and computer systems and computer-aided validation. Each chapter goes into some detail describing the critical development and related validation considerations for each topic. This book is not intended to be a practical description of the analytical validation process, but more of a guide to the critical parameters and considerations that must be attended to in a pharmaceutical development program. Despite the existence of numerous guidelines including the recent attempts by the ICH to be implemented in 1998, the practical part of assay validation will always remain, to a certain extent, a matter of the personal preference of the analyst or company. Nevertheless, this book brings together the perspectives of several experts having extensive experience in different capacities in the pharmaceutical industry in an attempt to bring some consistency to analytical method development and validation.

Download or read book Validation in Thermal Analysis written by Markus Schubnell and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2022-08-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation of equipment, processes and methods is a basic requirement that nowadays has to be met in most industries. This handbook deals with the validation of computerized systems in general as well as with analytical method validation. The many detailed practical examples focus on thermal analysis of materials, such as plastics and rubber. The handbook is intended for newcomers interested in the theoretical and regulatory aspects of validation and for thermal analysis practitioners who have to validate their equipment and methods. Contents: Part 1: Validation of Computerized Systems Recent Changes in Regulations and Regulatory Guidance Instrument Qualification, Computerized System Validation and Method Validation Regulatory Requirements for Computerized System Validation Computerized System Validation Writing the User Requirements Specification (URS) Auditing the System Supplier Installation Qualification and Operational Qualification (IQ and OQ) Performance Qualification (PQ) or End User Testing Part 2: Method Validation Measurement Errors and Uncertainty of Measurement Validation of Analytical Procedures and Methods Interlaboratory Studies in Thermal Analysis Method Development Through to SOP Practical Examples Appendix 1: 21 CFR Part 11 and EU GMP Annex 11 Appendix 2: Basic Statistics Appendix 3: Standard Test Methods for Thermal Analysis

Download or read book Analytical Method Development and Validation written by Michael E. Swartz and published by CRC Press. This book was released on 2018-10-03 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes analytical methods development, optimization and validation, and provides examples of successful methods development and validation in high-performance liquid chromatography (HPLC) areas. The text presents an overview of Food and Drug Administration (FDA)/International Conference on Harmonization (ICH) regulatory guidelines, compliance with validation requirements for regulatory agencies, and methods validation criteria stipulated by the US Pharmacopia, FDA and ICH.

Download or read book Validation of Analytical Methods for Pharmaceutical Analysis written by Oona McPolin and published by Lulu.com. This book was released on 2009-05-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide on validating analytical methods. Key features: Full review of the available regulatory guidelines on validation and in particular, ICH. Sections of the guideline, Q2(R1), have been reproduced in this book with the kind permission of the ICH Secretariat; Thorough discussion of each of the validation characteristics (Specificity; Linearity; Range; Accuracy; Precision; Detection Limit; Quantitation Limit; Robustness; System Suitability) plus practical tips on how they may be studied; What to include in a validation protocol with advice on the experimental procedure to follow and selection of appropriate acceptance criteria; How to interpret and calculate the results of a validation study including the use of suitable statistical calculations; A fully explained case study demonstrating how to plan a validation study, what to include in the protocol, experiments to perform, setting acceptance criteria, interpretation of the results and reporting the study.

Download or read book Method Validation in Pharmaceutical Analysis written by Joachim Ermer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a practical approach, the authors provide a detailed interpretation of the existing regulations (GMP, ICH), while also discussing the appropriate calculations, parameters and tests. The book thus allows readers to validate the analysis of pharmaceutical compounds while complying with both the regulations as well as the industry demands for robustness and cost effectiveness. Following an introduction to the basic parameters and tests in pharmaceutical validation, including specificity, linearity, range, precision, accuracy, detection and quantitation limits, the text focuses on a life-cycle approach to validation and the integration of validation into the whole analytical quality assurance system. The whole is rounded off with a look at future trends. With its first-hand knowledge of the industry as well as regulating bodies, this is an invaluable reference for analytical chemists, the pharmaceutical industry, pharmaceutists, QA officers, and public authorities.

Download or read book Computer Systems Validation in Clinical Research written by ACDM/PSI Working Party on Computer Systems Validation and published by . This book was released on 1997 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Particulate Matter Contamination in Healthcare Manufacturing written by Thomas A. Barber and published by CRC Press. This book was released on 1999-10-31 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers practical applications addressing the specifics of contamination, including particle origination, characterization, identification, and elimination, with a special focus on quality considerations. Written by an industry expert, this material offers a clear and concise understanding of particle populations and their control in stability, efficacy, and predictability in the manufacture of healthcare products. Complete with a full-color insert of micrographs illustrating commonly encountered particulate matter and over eighty figures, tables, and charts. Features

Download or read book Encyclopedia of Chromatography written by Jack Cazes and published by CRC Press. This book was released on 2009-10-12 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and expanded, this third edition offers illustrative tables and figures to clarify technical points in the articles and provides a valuable, reader-friendly reference for all those who employ chromatographic methods for analysis of complex mixtures of substances. An authoritative source of information, this introductory guide to specific chromatographic techniques and theory discusses the relevant science and technology, offering key references for analyzing specific chemicals and applications in industry and focusing on emerging technologies and uses.