Download or read book Validation of Analytical Methods for Pharmaceutical Analysis written by Oona McPolin and published by Lulu.com. This book was released on 2009-05-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide on validating analytical methods. Key features: Full review of the available regulatory guidelines on validation and in particular, ICH. Sections of the guideline, Q2(R1), have been reproduced in this book with the kind permission of the ICH Secretariat; Thorough discussion of each of the validation characteristics (Specificity; Linearity; Range; Accuracy; Precision; Detection Limit; Quantitation Limit; Robustness; System Suitability) plus practical tips on how they may be studied; What to include in a validation protocol with advice on the experimental procedure to follow and selection of appropriate acceptance criteria; How to interpret and calculate the results of a validation study including the use of suitable statistical calculations; A fully explained case study demonstrating how to plan a validation study, what to include in the protocol, experiments to perform, setting acceptance criteria, interpretation of the results and reporting the study.
Download or read book Method Validation in Pharmaceutical Analysis written by Joachim Ermer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a practical approach, the authors provide a detailed interpretation of the existing regulations (GMP, ICH), while also discussing the appropriate calculations, parameters and tests. The book thus allows readers to validate the analysis of pharmaceutical compounds while complying with both the regulations as well as the industry demands for robustness and cost effectiveness. Following an introduction to the basic parameters and tests in pharmaceutical validation, including specificity, linearity, range, precision, accuracy, detection and quantitation limits, the text focuses on a life-cycle approach to validation and the integration of validation into the whole analytical quality assurance system. The whole is rounded off with a look at future trends. With its first-hand knowledge of the industry as well as regulating bodies, this is an invaluable reference for analytical chemists, the pharmaceutical industry, pharmaceutists, QA officers, and public authorities.
Download or read book Development and Validation of Analytical Methods written by Christopher M. Riley and published by Elsevier. This book was released on 1996-05-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to validate an analytical or bioanalytical method is encountered by analysts in the pharmaceutical industry on an almost daily basis, because adequately validated methods are a necessity for approvable regulatory filings. What constitutes a validated method, however, is subject to analyst interpretation because there is no universally accepted industry practice for assay validation. This book is intended to serve as a guide to the analyst in terms of the issues and parameters that must be considered in the development and validation of analytical methods. In addition to the critical issues surrounding method validation, this book also deals with other related factors such as method development, data acquisition, automation, cleaning validation and regulatory considerations. The book is divided into three parts. Part One, comprising two chapters, looks at some of the basic concepts of method validation. Chapter 1 discusses the general concept of validation and its role in the process of transferring methods from laboratory to laboratory. Chapter 2 looks at some of the critical parameters included in a validation program and the various statistical treatments given to these parameters. Part Two (Chapters 3, 4 and 5) of the book focuses on the regulatory perspective of analytical validation. Chapter 3 discusses in some detail how validation is treated by various regulatory agencies around the world, including the United States, Canada, the European Community, Australia and Japan. This chapter also discusses the International Conference on Harmonization (ICH) treatment of assay validation. Chapters 4 and 5 cover the issues and various perspectives of the recent United States vs. Barr Laboratories Inc. case involving the retesting of samples. Part Three (Chapters 6 - 12) covers the development and validation of various analytical components of the pharmaceutical product development process. This part of the book contains specific chapters dedicated to bulk drug substances and finished products, dissolution studies, robotics and automated workstations, biotechnology products, biological samples, analytical methods for cleaning procedures and computer systems and computer-aided validation. Each chapter goes into some detail describing the critical development and related validation considerations for each topic. This book is not intended to be a practical description of the analytical validation process, but more of a guide to the critical parameters and considerations that must be attended to in a pharmaceutical development program. Despite the existence of numerous guidelines including the recent attempts by the ICH to be implemented in 1998, the practical part of assay validation will always remain, to a certain extent, a matter of the personal preference of the analyst or company. Nevertheless, this book brings together the perspectives of several experts having extensive experience in different capacities in the pharmaceutical industry in an attempt to bring some consistency to analytical method development and validation.
Download or read book Method Validation in Pharmaceutical Analysis written by Joachim Ermer and published by John Wiley & Sons. This book was released on 2014-11-10 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of a global bestseller has been completely redesigned and extensively rewritten to take into account the new Quality by Design (QbD) and lifecycle concepts in pharmaceutical manufacturing. As in the first edition, the fundamental requirements for analytical method validation are covered, but the second edition describes how these are applied systematically throughout the entire analytical lifecycle. QbD principles require adoption of a systematic approach to development and validation that begin with predefined objectives. For analytical methods these predefined objectives are established as an Analytical Target Profile (ATP). The book chapters are aligned with recently introduced standards and guidelines for manufacturing processes validation and follow the three stages of the analytical lifecycle: Method Design, Method Performance Qualification, and Continued Method Performance Verification. Case studies and examples from the pharmaceutical industry illustrate the concepts and guidelines presented, and the standards and regulations from the US (FDA), European (EMA) and global (ICH) regulatory authorities are considered throughout. The undisputed gold standard in the field.
Download or read book Handbook of Analytical Validation written by Michael E. Swartz and published by CRC Press. This book was released on 2012-04-24 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for practitioners in both the drug and biotechnology industries, this handbook carefully compiles the current regulatory requirements to correctly and properly validate a new or modified analytical method. The Handbook of Analytical Validation is designed to teach readers how to fully and correctly adapt new or modified analytical methods to meet regulatory requirements. The contents offer the latest regulatory requirements for submitting applications for new drugs or other applications, as regards analytical method validation. The chapters apply to both small molecules in the conventional pharmaceutical industry, as well the biotech industry.
Download or read book Analytical Method Validation and Instrument Performance Verification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2004-04-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Validation describes the procedures used to analyze pharmaceutical products so that the data generated will comply with the requirements of regulatory bodies of the US, Canada, Europe and Japan. Calibration of Instruments describes the process of fixing, checking or correcting the graduations of instruments so that they comply with those regulatory bodies. This book provides a thorough explanation of both the fundamental and practical aspects of biopharmaceutical and bioanalytical methods validation. It teaches the proper procedures for using the tools and analysis methods in a regulated lab setting. Readers will learn the appropriate procedures for calibration of laboratory instrumentation and validation of analytical methods of analysis. These procedures must be executed properly in all regulated laboratories, including pharmaceutical and biopharmaceutical laboratories, clinical testing laboratories (hospitals, medical offices) and in food and cosmetic testing laboratories.
Download or read book Calibration and Validation of Analytical Methods written by Mark Stauffer and published by BoD – Books on Demand. This book was released on 2018-04-25 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to introduce the reader to current methodologies in analytical calibration and validation. This collection of contributed research articles and reviews addresses current developments in the calibration of analytical methods and techniques and their subsequent validation. Section 1, "Introduction," contains the Introductory Chapter, a broad overview of analytical calibration and validation, and a brief synopsis of the following chapters. Section 2 "Calibration Approaches" presents five chapters covering calibration schemes for some modern analytical methods and techniques. The last chapter in this section provides a segue into Section 3, "Validation Approaches," which contains two chapters on validation procedures and parameters. This book is a valuable source of scientific information for anyone interested in analytical calibration and validation.
Download or read book Analytical Method Development and Validation written by Michael E. Swartz and published by CRC Press. This book was released on 2018-10-03 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes analytical methods development, optimization and validation, and provides examples of successful methods development and validation in high-performance liquid chromatography (HPLC) areas. The text presents an overview of Food and Drug Administration (FDA)/International Conference on Harmonization (ICH) regulatory guidelines, compliance with validation requirements for regulatory agencies, and methods validation criteria stipulated by the US Pharmacopia, FDA and ICH.
Download or read book Practical Approaches to Method Validation and Essential Instrument Qualification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2011-03-01 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical approaches to ensure that analytical methods and instruments meet GMP standards and requirements Complementing the authors' first book, Analytical Method Validation and Instrument Performance Verification, this new volume provides coverage of more advanced topics, focusing on additional and supplemental methods, instruments, and electronic systems that are used in pharmaceutical, biopharmaceutical, and clinical testing. Readers will gain new and valuable insights that enable them to avoid common pitfalls in order to seamlessly conduct analytical method validation as well as instrument operation qualification and performance verification. Part 1, Method Validation, begins with an overview of the book's risk-based approach to phase appropriate validation and instrument qualification; it then focuses on the strategies and requirements for early phase drug development, including validation of specific techniques and functions such as process analytical technology, cleaning validation, and validation of laboratory information management systems Part 2, Instrument Performance Verification, explores the underlying principles and techniques for verifying instrument performance—coverage includes analytical instruments that are increasingly important to the pharmaceutical industry, such as NIR spectrometers and particle size analyzers—and offers readers a variety of alternative approaches for the successful verification of instrument performance based on the needs of their labs At the end of each chapter, the authors examine important practical problems and share their solutions. All the methods covered in this book follow Good Analytical Practices (GAP) to ensure that reliable data are generated in compliance with current Good Manufacturing Practices (cGMP). Analysts, scientists, engineers, technologists, and technical managers should turn to this book to ensure that analytical methods and instruments are accurate and meet GMP standards and requirements.
Download or read book Validation in Chemical Measurement written by Paul De Bièvre and published by Springer Science & Business Media. This book was released on 2005-01-12 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation of analytical methods is based on the characterisation of a measurement procedure (selectivity, sensitivity, repeatability, reproducibility). This volume collects 31 outstanding papers on the topic, mostly published in the period 2000-2003 in the journal "Accreditation and Quality Assurance". They provide the latest understanding, and possibly the rationale why it is important to integrate the concept of validation into the standard procedures of every analytical laboratory. In addition, this anthology considers the benefits to both: the analytical laboratory and the user of the measurement results.
Download or read book Handbook of Pharmaceutical Analysis by HPLC written by Satinder Ahuja and published by Elsevier. This book was released on 2005-02-09 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: High pressure liquid chromatography–frequently called high performance liquid chromatography (HPLC or, LC) is the premier analytical technique in pharmaceutical analysis and is predominantly used in the pharmaceutical industry. Written by selected experts in their respective fields, the Handbook of Pharmaceutical Analysis by HPLC Volume 6, provides a complete yet concise reference guide for utilizing the versatility of HPLC in drug development and quality control. Highlighting novel approaches in HPLC and the latest developments in hyphenated techniques, the book captures the essence of major pharmaceutical applications (assays, stability testing, impurity testing, dissolution testing, cleaning validation, high-throughput screening). A complete reference guide to HPLC Describes best practices in HPLC and offers 'tricks of the trade' in HPLC operation and method development Reviews key HPLC pharmaceutical applications and highlights currents trends in HPLC ancillary techniques, sample preparations, and data handling
Download or read book Specification of Drug Substances and Products written by Christopher M. Riley and published by Elsevier. This book was released on 2020-07-23 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specification of Drug Substances and Products: Development and Validation of Analytical Methods, Second Edition, presents a comprehensive and critical analysis of the requirements and approaches to setting specifications for new pharmaceutical products, with an emphasis on phase-appropriate development, validation of analytical methods, and their application in practice. This thoroughly revised second edition covers topics not covered or not substantially covered in the first edition, including method development and validation in the clinical phase, method transfer, process analytical technology, analytical life cycle management, special challenges with generic drugs, genotoxic impurities, topical products, nasal sprays and inhalation products, and biotechnology products. The book's authors have been carefully selected as former members of the ICH Expert Working Groups charged with developing the ICH guidelines, and/or subject-matter experts in the industry, academia and in government laboratories. Presents a critical assessment of the application of ICH guidelines on method validation and specification setting Written by subject-matter experts involved in the development and application of the guidelines Provides a comprehensive treatment of the analytical methodologies used in the analysis, control and specification of new drug substances and products Covers the latest statistical approaches (including analytical quality by design) in the development of specifications, method validation and shelf-life prediction
Download or read book Handbook of Analytical Quality by Design written by Sarwar Beg and published by Academic Press. This book was released on 2021-01-09 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Analytical Quality by Design addresses the steps involved in analytical method development and validation in an effort to avoid quality crises in later stages. The AQbD approach significantly enhances method performance and robustness which are crucial during inter-laboratory studies and also affect the analytical lifecycle of the developed method. Sections cover sample preparation problems and the usefulness of the QbD concept involving Quality Risk Management (QRM), Design of Experiments (DoE) and Multivariate (MVT) Statistical Approaches to solve by optimizing the developed method, along with validation for different techniques like HPLC, UPLC, UFLC, LC-MS and electrophoresis. This will be an ideal resource for graduate students and professionals working in the pharmaceutical industry, analytical chemistry, regulatory agencies, and those in related academic fields. Concise language for easy understanding of the novel and holistic concept Covers key aspects of analytical development and validation Provides a robust, flexible, operable range for an analytical method with greater excellence and regulatory compliance
Download or read book ICH Quality Guidelines written by Andrew Teasdale and published by John Wiley & Sons. This book was released on 2017-10-09 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the implications and practical implementation of multi-disciplinary International Conference on Harmonization (ICH) topics, this book gives an integrated view of how the guidelines inform drug development strategic planning and decision-making. • Addresses a consistent need for interpretation, training, and implementation examples of ICH guidelines via case studies • Offers a primary reference point for practitioners addressing the dual challenge of interpretation and practical implementation of ICH guidelines • Uses case studies to help readers understand and apply ICH guidelines • Provides valuable insights into guidelines development, with chapters by authors involved in generating or with experience implementing the guidelines • Includes coverage of stability testing, analytical method validation, impurities, biotechnology drugs and products, and good manufacturing practice (GMP)
Download or read book Guidance for the Validation of Analytical Methodology and Calibration of Equipment Used for Testing of Illicit Drugs in Seized Materials and Biological Specimens written by United Nations and published by United Nations Publications. This book was released on 2009 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation of analytical methods and the calibration of equipment are important aspects of quality assurance in the laboratory. This manual deals with both of these within the context of testing of illicit drugs in seized materials and biological specimens. It provides an introduction and practical guidance to national authorities and analysts in the implementation of method validation and verification, and also in the calibration/performance verification of laboratory instrumentation and equipment within their existing internal quality assurance programmes. The procedures described represent a synthesis of the experience of scientists from several reputable laboratories around the world.
Download or read book Method Validation in Pharmaceutical Analysis 3e A Guide to Best Practice written by J. Ermer and published by VCH. This book was released on 2022-10-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pharmaceutical Analysis for Small Molecules written by Behnam Davani and published by John Wiley & Sons. This book was released on 2017-08-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction for scientists engaged in new drug development, analysis, and approvals Each year the pharmaceutical industry worldwide recruits thousands of recent science graduates—especially chemistry, analytical chemistry, pharmacy, and pharmaceutical majors—into its ranks. However, because of their limited background in pharmaceutical analysis most of those new recruits find making the transition from academia to industry very difficult. Designed to assist both recent graduates, as well as experienced chemists or scientists with limited regulatory, compendial or pharmaceutical analysis background, make that transition, Pharmaceutical Analysis for Small Molecules is a concise, yet comprehensive introduction to the drug development process and analysis of chemically synthesized, small molecule drugs. It features contributions by distinguished experts in the field, including editor and author, Dr. Behnam Davani, an analytical chemist with decades of technical management and teaching experience in compendial, regulatory, and industry. This book provides an introduction to pharmaceutical analysis for small molecules (non-biologics) using commonly used techniques for drug characterization and performance tests. The driving force for industry to perform pharmaceutical analyses is submission of such data and supporting documents to regulatory bodies for drug approval in order to market their products. In addition, related required supporting studies including good laboratory/documentation practices including analytical instrument qualification are highlighted in this book. Topics covered include: Drug Approval Process and Regulatory Requirements (private standards) Pharmacopeias and Compendial Approval Process (public standards) Common methods in pharmaceutical analysis (typically compendial) Common Calculations for assays and impurities and other specific tests Analytical Method Validation, Verification, Transfer Specifications including how to handle out of specification (OOS) and out of trend (OOT) Impurities including organic, inorganic, residual solvents and elemental impurities Good Documentation Practices for regulatory environment Management of Analytical Laboratories Analytical Instrument Qualifications including IQ, OQ, PQ and VQ Due to global nature of pharmaceutical industry, other topics on both regulatory (ICH) and Compendial harmonization are also highlighted. Pharmaceutical Analysis for Small Molecules is a valuable working resource for scientists directly or indirectly involved with the drug development process, including analytical chemists, pharmaceutical scientists, pharmacists, and quality control/quality assurance professionals. It also is an excellent text/reference for graduate students in analytical chemistry, pharmacy, pharmaceutical and regulatory sciences.
