Download or read book Validation of a two dimensional model for vanadium redox flow batteries written by Maik Becker and published by Cuvillier Verlag. This book was released on 2020-05-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Redox-Flow batteries can play a crucial role in the future electricity supply in order to balance the time lag between the generation of electrical energy from photovoltaics or wind power and the demand for electrical energy. However, to deploy the technology on a large scale, significant cost reductions are required. A thorough knowledge of the reactions and processes taking place within a redox-flow battery is very helpful for this task and this knowledge can be significantly improved by using a suitable mathematical model to describe the processes in a single cell of a redox-flow battery. Nevertheless, this requires a valid model that has been compared with experimental data and that can reproduce these data plausibly and validly. In this thesis, the validation of a two-dimensional model for the description of potential and current density distributions in the porous electrodes of a vanadium redox-flow battery is presented, taking into account effects of kinetics and mass transport. Newly developed potential probes are used for in-situ measurement of solid and liquid phase potentials within a single cell of a vanadium redox-flow battery. The description of the measured cell voltage and potential probe signals by the model reveals a good congruence between the model and the experimental data, so the model can be regarded as valid. Additional suggestions for improvements of the model and the implementation of further models describing membrane crossover effects or electrolyte properties are given.

Download or read book Model based Design and Optimization of Vanadium Redox Flow Batteries written by Sebastian König and published by Cuvillier Verlag. This book was released on 2017-09-13 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, a holistic approach is used to develop a multi-physical model of the Vanadium Redox Flow Battery on a system level. The model is validated with experimental data from three flow battery manufacturers and is then deployed in an extensive parameter study for designing a flow battery cell. Using finite element analysis (FEA), twenty-four different cell designs are derived, which vary in electrode area and the design of the electrolyte inlet and outlet supply channels. The performance of the designs is then simulated in a single-stack and a three-stack string system. The presented model is also deployed in a flow rate optimization study. Here, a novel strategy involving the model-based optimization of operation-points defined by state-of-charge and charging or discharging current is presented and compared to conventional flow rate control strategies. Finally, a stack voltage controller is introduced, which prevents the violation of cell voltage limits as long as the pump capacity is not fully utilized.

Download or read book Redox Flow Batteries written by Huamin Zhang and published by CRC Press. This book was released on 2017-11-22 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow batteries have received attention in large-scale energy storage due to their flexible design, high safety, high energy efficiency, and environmental friendliness. In recent years, they have been rapidly developed and tested in a variety of scales that prove their feasibility and advantages of use. As energy becomes a global focus, it is important to consider flow battery systems. This book offers a detailed introduction to the function of different kinds of redox flow batteries, including vanadium flow batteries, as well as the electrochemical processes for their development, materials and components, applications, and near future prospects. Redox Flow Batteries: Fundamentals and Applications will give readers a full understanding of flow batteries from fundamentals to commercial applications.

Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.

Download or read book Numerical Modeling of an All Vanadium Redox Flow Battery written by and published by . This book was released on 2014 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: We develop a capability to simulate reduction-oxidation (redox) flow batteries in the Sierra Multi-Mechanics code base. Specifically, we focus on all-vanadium redox flow batteries; however, the capability is general in implementation and could be adopted to other chemistries. The electrochemical and porous flow models follow those developed in the recent publication by [28]. We review the model implemented in this work and its assumptions, and we show several verification cases including a binary electrolyte, and a battery half-cell. Then, we compare our model implementation with the experimental results shown in [28], with good agreement seen. Next, a sensitivity study is conducted for the major model parameters, which is beneficial in targeting specific features of the redox flow cell for improvement. Lastly, we simulate a three-dimensional version of the flow cell to determine the impact of plenum channels on the performance of the cell. Such channels are frequently seen in experimental designs where the current collector plates are borrowed from fuel cell designs. These designs use a serpentine channel etched into a solid collector plate.

Download or read book Multiscale Modeling Simulation and Design From Conventional Methods to the Latest in Data Science written by J. N. Harb and published by The Electrochemical Society. This book was released on 2018-05-04 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuel Cell Fundamentals written by Ryan O'Hayre and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete, up-to-date, introductory guide to fuel cell technology and application Fuel Cell Fundamentals provides a thorough introduction to the principles and practicalities behind fuel cell technology. Beginning with the underlying concepts, the discussion explores fuel cell thermodynamics, kinetics, transport, and modeling before moving into the application side with guidance on system types and design, performance, costs, and environmental impact. This new third edition has been updated with the latest technological advances and relevant calculations, and enhanced chapters on advanced fuel cell design and electrochemical and hydrogen energy systems. Worked problems, illustrations, and application examples throughout lend a real-world perspective, and end-of chapter review questions and mathematical problems reinforce the material learned. Fuel cells produce more electricity than batteries or combustion engines, with far fewer emissions. This book is the essential introduction to the technology that makes this possible, and the physical processes behind this cost-saving and environmentally friendly energy source. Understand the basic principles of fuel cell physics Compare the applications, performance, and costs of different systems Master the calculations associated with the latest fuel cell technology Learn the considerations involved in system selection and design As more and more nations turn to fuel cell commercialization amidst advancing technology and dropping deployment costs, global stationary fuel cell revenue is expected to grow from $1.4 billion to $40.0 billion by 2022. The sector is forecasted to explode, and there will be a tremendous demand for high-level qualified workers with advanced skills and knowledge of fuel cell technology. Fuel Cell Fundamentals is the essential first step toward joining the new energy revolution.

Download or read book Electrochemical Energy written by Pei Kang Shen and published by CRC Press. This book was released on 2018-10-08 with total page 1051 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Energy: Advanced Materials and Technologies covers the development of advanced materials and technologies for electrochemical energy conversion and storage. The book was created by participants of the International Conference on Electrochemical Materials and Technologies for Clean Sustainable Energy (ICES-2013) held in Guangzhou, China, and incorporates select papers presented at the conference. More than 300 attendees from across the globe participated in ICES-2013 and gave presentations in six major themes: Fuel cells and hydrogen energy Lithium batteries and advanced secondary batteries Green energy for a clean environment Photo-Electrocatalysis Supercapacitors Electrochemical clean energy applications and markets Comprised of eight sections, this book includes 25 chapters featuring highlights from the conference and covering every facet of synthesis, characterization, and performance evaluation of the advanced materials for electrochemical energy. It thoroughly describes electrochemical energy conversion and storage technologies such as batteries, fuel cells, supercapacitors, hydrogen generation, and their associated materials. The book contains a number of topics that include electrochemical processes, materials, components, assembly and manufacturing, and degradation mechanisms. It also addresses challenges related to cost and performance, provides varying perspectives, and emphasizes existing and emerging solutions. The result of a conference encouraging enhanced research collaboration among members of the electrochemical energy community, Electrochemical Energy: Advanced Materials and Technologies is dedicated to the development of advanced materials and technologies for electrochemical energy conversion and storage and details the technologies, current achievements, and future directions in the field.

Download or read book Physicochemical Hydrodynamics written by Ronald F. Probstein and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physicochemical Hydrodynamics: An Introduction aims to provide an introduction to physicochemical hydrodynamics (PCH), which deals with the interaction between fluid flow and physical, chemical, and biochemical processes. PCH has applications in many areas of science and technology and is a rapidly expanding field. Emphasis of this book is on rational theory and its consequences, with the purpose of showing the underlying unity of PCH, in which diverse phenomena can be described in physically and mathematically similar ways. The magic of this unity is shown in the similar manner in which solutes concentrate in a flow containing chemically reacting surfaces, reverse osmosis membranes, and electrodialysis membranes or the similarity of particle motions in sedimentation, centrifugation, ultrafiltration, and electrophoresis. Problems are included at the end of each chapter and are ordered following the sequence in which the material is set out. The questions range in difficulty, with most requiring an analytic development, but with some asking only for a descriptive answer. All problems are intended to illustrate the ideas presented, though often the solution goes beyond the explicit discussion in the book, with the answer constituting a generalization or extension of the text material. This book is an essential source of information for students majoring in the field of PCH.

Download or read book Battery System Modeling written by Shunli Wang and published by Elsevier. This book was released on 2021-06-23 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battery System Modeling provides advances on the modeling of lithium-ion batteries. Offering step-by-step explanations, the book systematically guides the reader through the modeling of state of charge estimation, energy prediction, power evaluation, health estimation, and active control strategies. Using applications alongside practical case studies, each chapter shows the reader how to use the modeling tools provided. Moreover, the chemistry and characteristics are described in detail, with algorithms provided in every chapter. Providing a technical reference on the design and application of Li-ion battery management systems, this book is an ideal reference for researchers involved in batteries and energy storage. Moreover, the step-by-step guidance and comprehensive introduction to the topic makes it accessible to audiences of all levels, from experienced engineers to graduates. - Explains how to model battery systems, including equivalent, electrical circuit and electrochemical nernst modeling - Includes comprehensive coverage of battery state estimation methods, including state of charge estimation, energy prediction, power evaluation and health estimation - Provides a dedicated chapter on active control strategies

Download or read book Mathematical Modeling of Lithium Batteries written by Krishnan S. Hariharan and published by Springer. This book was released on 2017-12-28 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique to be the only one completely dedicated for battery modeling for all components of battery management system (BMS) applications. The contents of this book compliment the multitude of research publications in this domain by providing coherent fundamentals. An explosive market of Li ion batteries has led to aggressive demand for mathematical models for battery management systems (BMS). Researchers from multi-various backgrounds contribute from their respective background, leading to a lateral growth. Risk of this runaway situation is that researchers tend to use an existing method or algorithm without in depth knowledge of the cohesive fundamentals—often misinterpreting the outcome. It is worthy to note that the guiding principles are similar and the lack of clarity impedes a significant advancement. A repeat or even a synopsis of all the applications of battery modeling albeit redundant, would hence be a mammoth task, and cannot be done in a single offering. The authors believe that a pivotal contribution can be made by explaining the fundamentals in a coherent manner. Such an offering would enable researchers from multiple domains appreciate the bedrock principles and forward the frontier. Battery is an electrochemical system, and any level of understanding cannot ellipse this premise. The common thread that needs to run across—from detailed electrochemical models to algorithms used for real time estimation on a microchip—is that it be physics based. Build on this theme, this book has three parts. Each part starts with developing a framework—often invoking basic principles of thermodynamics or transport phenomena—and ends with certain verified real time applications. The first part deals with electrochemical modeling and the second with model order reduction. Objective of a BMS is estimation of state and health, and the third part is dedicated for that. Rules for state observers are derived from a generic Bayesian framework, and health estimation is pursued using machine learning (ML) tools. A distinct component of this book is thorough derivations of the learning rules for the novel ML algorithms. Given the large-scale application of ML in various domains, this segment can be relevant to researchers outside BMS domain as well. The authors hope this offering would satisfy a practicing engineer with a basic perspective, and a budding researcher with essential tools on a comprehensive understanding of BMS models.

Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.

Download or read book Transport Phenomena in Biological Systems written by George A. Truskey and published by Prentice Hall. This book was released on 2009 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For one-semester, advanced undergraduate/graduate courses in Biotransport Engineering. Presenting engineering fundamentals and biological applications in a unified way, this text provides students with the skills necessary to develop and critically analyze models of biological transport and reaction processes. It covers topics in fluid mechanics, mass transport, and biochemical interactions, with engineering concepts motivated by specific biological problems.

Download or read book Electricity Transmission Distribution and Storage Systems written by Ziad Melhem and published by Elsevier. This book was released on 2013-10-31 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity transmission and distribution systems carry electricity from suppliers to demand sites. During transmission materials ageing and performance issues can lead to losses amounting to about 10% of the total generated electricity. Advanced grid technologies are therefore in development to sustain higher network efficiency, while also maintaining power quality and security.Electricity transmission, distribution and storage systems presents a comprehensive review of the materials, architecture and performance of electricity transmission and distribution networks, and the application and integration of electricity storage systems.The first part of the book reviews the fundamental issues facing electricity networks, with chapters discussing Transmission and Distribution (T&D) infrastructure, reliability and engineering, regulation and planning, the protection of T&D networks and the integration of distributed energy resources to the grid. Chapters in part two review the development of transmission and distribution system, with advanced concepts such as FACTS and HVDC, as well as advanced materials such as superconducting material and network components. This coverage is extended in the final section with chapters reviewing materials and applications of electricity storage systems for use in networks, for renewable and distributed generation plant, and in buildings and vehicles, such as batteries and other advanced electricity storage devices.With its distinguished editor, Electricity transmission, distribution and storage systems is an essential reference for materials and electrical engineers, energy consultants, T&D systems designers and technology manufacturers involved in advanced transmission and distribution. - Presents a comprehensive review of the materials, architecture and performance of electricity transmission and distribution networks - Examines the application and integration of electricity storage systems - Reviews the fundamental issues facing electricity networks and examines the development of transmission and distribution systems

Download or read book Lithium ion Batteries written by Perla B. Balbuena and published by World Scientific. This book was released on 2004 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book focuses on the mechanisms of formation of a solid-electrolyte interphase (SEI) on the electrode surfaces of lithium-ion batteries. The SEI film is due to electromechanical reduction of species present in the electrolyte. It is widely recognized that the presence of the film plays an essential role in the battery performance, and its very nature can determine an extended (or shorter) life for the battery. In spite of the numerous related research efforts, details on the stability of the SEI composition and its influence on the battery capacity are still controversial. This book carefully analyzes and discusses the most recent findings and advances on this topic.

Download or read book Fundamentals of Electrochemistry written by Vladimir S. Bagotsky and published by John Wiley & Sons. This book was released on 2005-12-02 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Electrochemistry provides the basic outline of most topics of theoretical and applied electrochemistry for students not yet familiar with this field, as well as an outline of recent and advanced developments in electrochemistry for people who are already dealing with electrochemical problems. The content of this edition is arranged so that all basic information is contained in the first part of the book, which is now rewritten and simplified in order to make it more accessible and used as a textbook for undergraduate students. More advanced topics, of interest for postgraduate levels, come in the subsequent parts. This updated second edition focuses on experimental techniques, including a comprehensive chapter on physical methods for the investigation of electrode surfaces. New chapters deal with recent trends in electrochemistry, including nano- and micro-electrochemistry, solid-state electrochemistry, and electrocatalysis. In addition, the authors take into account the worldwide renewal of interest for the problem of fuel cells and include chapters on batteries, fuel cells, and double layer capacitors.

Download or read book Battery Systems Engineering written by Christopher D. Rahn and published by John Wiley & Sons. This book was released on 2013-01-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete all-in-one reference on the important interdisciplinary topic of Battery Systems Engineering Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms. This original approach gives a useful overview for systems engineers in chemical, mechanical, electrical, or aerospace engineering who are interested in learning more about batteries and how to use them effectively. Chemists, material scientists, and mathematical modelers can also benefit from this book by learning how their expertise affects battery management. Approaches a topic which has experienced phenomenal growth in recent years Topics covered include: Electrochemistry; Governing Equations; Discretization Methods; System Response and Battery Management Systems Include tables, illustrations, photographs, graphs, worked examples, homework problems, and references, to thoroughly illustrate key material Ideal for engineers working in the mechanical, electrical, and chemical fields as well as graduate students in these areas A valuable resource for Scientists and Engineers working in the battery or electric vehicle industries, Graduate students in mechanical engineering, electrical engineering, chemical engineering.