Download or read book Faecal Sludge Management written by Linda Strande and published by IWA Publishing. This book was released on 2014-08-15 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that literally billions of residents in urban and peri-urban areas of Africa, Asia, and Latin America are served by onsite sanitation systems (e.g. various types of latrines and septic tanks). Until recently, the management of faecal sludge from these onsite systems has been grossly neglected, partially as a result of them being considered temporary solutions until sewer-based systems could be implemented. However, the perception of onsite or decentralized sanitation technologies for urban areas is gradually changing, and is increasingly being considered as long-term, sustainable options in urban areas, especially in low- and middle-income countries that lack sewer infrastructures. This is the first book dedicated to faecal sludge management. It compiles the current state of knowledge of the rapidly evolving field of faecal sludge management, and presents an integrated approach that includes technology, management, and planning based on Sandecs 20 years of experience in the field. Faecal Sludge Management: Systems Approach for Implementation and Operation addresses the organization of the entire faecal sludge management service chain, from the collection and transport of sludge, and the current state of knowledge of treatment options, to the final end use or disposal of treated sludge. The book also presents important factors to consider when evaluating and upscaling new treatment technology options. The book is designed for undergraduate and graduate students, and engineers and practitioners in the field who have some basic knowledge of environmental and/or wastewater engineering.
Download or read book Cleaning Validation Manual written by Syed Imtiaz Haider and published by CRC Press. This book was released on 2010-05-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decades, enormous progress and enhancement of pharmaceutical manufacturing equipment and its use have been made. And while there are support documents, books, articles, and online resources available on the principles of cleaning and associated processing techniques, none of them provides a single database with convenient, ready-to-
Download or read book Single Use Technology in Biopharmaceutical Manufacture written by Regine Eibl and published by John Wiley & Sons. This book was released on 2019-07-18 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative guide to the principles, characteristics, engineering aspects, economics, and applications of disposables in the manufacture of biopharmaceuticals The revised and updated second edition of Single-Use Technology in Biopharmaceutical Manufacture offers a comprehensive examination of the most-commonly used disposables in the manufacture of biopharmaceuticals. The authors—noted experts on the topic—provide the essential information on the principles, characteristics, engineering aspects, economics, and applications. This authoritative guide contains the basic knowledge and information about disposable equipment. The author also discusses biopharmaceuticals’ applications through the lens of case studies that clearly illustrate the role of manufacturing, quality assurance, and environmental influences. This updated second edition revises existing information with recent developments that have taken place since the first edition was published. The book also presents the latest advances in the field of single-use technology and explores topics including applying single-use devices for microorganisms, human mesenchymal stem cells, and T-cells. This important book: • Contains an updated and end-to-end view of the development and manufacturing of single-use biologics • Helps in the identification of appropriate disposables and relevant vendors • Offers illustrative case studies that examine manufacturing, quality assurance, and environmental influences • Includes updated coverage on cross-functional/transversal dependencies, significant improvements made by suppliers, and the successful application of the single-use technologies Written for biopharmaceutical manufacturers, process developers, and biological and chemical engineers, Single-Use Technology in Biopharmaceutical Manufacture, 2nd Edition provides the information needed for professionals to come to an easier decision for or against disposable alternatives and to choose the appropriate system.
Download or read book Pharmaceutical Isolators written by Brian Midcalf and published by Pharmaceutical Press. This book was released on 2004 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work considers the basic concepts, definitions, and standards necessary in the design, construction, commissioning, maintenance, and use of pharmaceutical isolators.
Download or read book La m thode de calcul des Limites R siduelles Acceptables un pilier de l optimisation de la strat gie de la validation de nettoyage dans l industrie pharmaceutique written by Fanny Dupuy and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dans l'industrie pharmaceutique, le nettoyage représente un pilier fondamental dans la lutte contre les contaminations des produits fabriqués. Afin d'évaluer l'efficacité de cette opération la stratégie de validation de nettoyage est particulièrement importante. Cela passe notamment par le choix de seuils d'acceptation adaptés et pertinents (prise en compte de la Permitted Daily Exposure (PDE), de la surface réelle des équipements...). Ce travail expose donc dans un premier temps, les différents modes de contamination et les différents moyens mis en œuvre pour les éviter. Puis, il détaille les pré requis à la validation de nettoyage ainsi que ses diverses étapes. Pour finir, il présente un exemple concret d'optimisation de stratégie de validation de nettoyage via le calcul de nouvelles Limites Résiduelles Acceptables (LRA) et le choix de nouveaux critères d'acceptation.
Download or read book Continuous Biomanufacturing written by Ganapathy Subramanian and published by John Wiley & Sons. This book was released on 2017-12-26 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most comprehensive treatise of this topic available, providing invaluable information on the technological and economic benefits to be gained from implementing continuous processes in the biopharmaceutical industry. Top experts from industry and academia cover the latest technical developments in the field, describing the use of single-use technologies alongside perfusion production platforms and downstream operations. Special emphasis is given to process control and monitoring, including such topics as 'quality by design' and automation. The book is supplemented by case studies that highlight the enormous potential of continuous manufacturing for biopharmaceutical production facilities.
Download or read book Global Burden of Disease and Risk Factors written by Alan D. Lopez and published by World Bank Publications. This book was released on 2006-04-02 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strategic health planning, the cornerstone of initiatives designed to achieve health improvement goals around the world, requires an understanding of the comparative burden of diseases and injuries, their corresponding risk factors and the likely effects of invervention options. The Global Burden of Disease framework, originally published in 1990, has been widely adopted as the preferred method for health accounting and has become the standard to guide the setting of health research priorities. This publication sets out an updated assessment of the situation, with an analysis of trends observed since 1990 and a chapter on the sensitivity of GBD estimates to various sources of uncertainty in methods and data.
Download or read book Per and polyfluorinated substances in the Nordic Countries written by Stefan Posner and published by Nordic Council of Ministers. This book was released on 2013-06-19 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Tema Nord report presents a study based on open information and custom market research to review the most common perfluorinated substances (PFC) with less focus on PFOS and PFOA. The study includes three major parts:1) Identification of relevant per-and polyfluorinated substances and their use in various industrial sectors in the Nordic market by interviews with major players and database information; 2) Emissions to and occurence in the Nordic environment of the substances described in 1); 3) A summary of knowledge of the toxic effects on humans and the environment of substances prioritized in 2); There is a lack of physical chemical data, analystical reference substances, human and environmental occurrence and toxicology data, as well as market information regarding PFCs other than PFOA and PFOS and the current legislation cannot enforce disclosure of specific PFC substance information.
Download or read book An Outline for Work in Experimental Engineering in the Engineering Department of the University of Virginia written by Jared Stout Lapham and published by . This book was released on 1919 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cleaning Validation written by Destin A. LeBlanc and published by CRC Press. This book was released on 2022-12-23 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical manufacturers and upper management are encouraged to meet the challenges of the science-based and risk-based approaches to cleaning validation. Using some of the principles and practices in this volume will help in designing a more effective and efficient cleaning validation program. Features • Timely coverage of cleaning validation for the pharmaceutical industry, a dynamic area in terms of health-based limits. • The author encourages pharmaceutical manufacturers, and particularly upper management, to meet the challenges of the science-based and riskbased approaches to cleaning validation. • Draws on the author’s vast experience in the field of cleaning validation and hazardous materials. • Discusses EMA vs. ISPE on Cleaning Limits and revised Risk-MaPP for highly hazardous products in shared facilities. • A diverse list of topics from protocol limits for yeasts and molds to cleaning validation for homeopathic drug products.
Download or read book How to Design Wastewater Systems for Local Conditions in Developing Countries written by David M. Robbins and published by IWA Publishing. This book was released on 2014-03-15 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical handbook providing a step-by-step approach to the techniques used for characterizing wastewater sources and investigating sites where collection, treatment and reuse/disposal technologies will be installed. It is intended to help enable local implementation of on-site and decentralized wastewater management system (DWMS)for wide scale use in development settings. How to Design Wastewater Systems for Local Conditions in Developing Countries helps local service providers and regulatory officials make informed decisions through the use of tools, checklists and case studies. It includes a link to a web based community of on-site and decentralized wastewater professionals, which contains related tools and case studies. This handbook serves as a reference for training classes, certification programs, and higher education programs in civil and sanitary engineering. There is an increasing interest on the part of local government officials and private sector service providers to implement wastewater treatment systems to solve sanitation problems. The model presented in this handbook promotes activities that first generate data related to source and site conditions that represent critical inputs, and then applies this information to the technology selection process. Matching the most appropriate technologies to the specific needs of the wastewater project is the key that leads to long term sustainability. How to Design Wastewater Systems for Local Conditions in Developing Countries is an invaluable resource for public sector decision makers and private sector service providers in developing countries. It is also a useful text for students at engineering colleges in developing countries interested in taking a class that teaches the methods of decentralized wastewater management system (DWMS) development.
Download or read book Jean Baptiste Say and Political Economy written by Jean-Baptiste Say and published by Taylor & Francis. This book was released on 2016-11-10 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jean-Baptiste Say (1767–1832) was one of the first great economists to have laid down the foundations of economic science. Author of the famous Treatise on Political Economy in 1803, which was revised and re-edited on several occasions, he published numerous other works including a voluminous Complete Course in Practical Political Economy in 1828–9. He also taught political economy successively from 1815 until his death in three Parisian establishments: the Athénée, the Conservatory of Arts and Trades, and the Collège de France. The texts in which Say exposes his approach to political economy have not been available in the English language until now except for the fourth edition of the ‘Preliminary Discourse’ which serves as an introduction to the Treatise. This book presents a translation which renders his works accessible to the English speaking world. For the first time, English readers will be able to become directly immersed in Say’s principal texts, where he develops his conception of political economy. Jean-Baptiste Say and Political Economy proposes a translation of a selection of eleven of Say’s texts. The first three are versions of the ‘Preliminary Discourse’ from the Treatise’s editions of 1803, 1814 and 1826 with the variations of the editions of 1817, 1819 and 1841. The following four texts are the opening discourses pronounced at the Conservatory in 1820 and 1828 and the Collège de France in 1831 and 1832. The eighth text is the ‘General Considerations’ which open the Complete Course in Practical Political Economy of 1828, with the variations of the 1840 re-edition. The final three texts are those Say devotes to ‘the progress of political economy’ in what is akin to a history of economic thought. This volume is of great importance to economic historians and people studying Jean-Baptiste Say, as well as those who are interested in economic theory and philosophy and political economy.
Download or read book Cambridge Handbook of Engineering Education Research written by Aditya Johri and published by Cambridge University Press. This book was released on 2014-02-10 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cambridge Handbook of Engineering Education Research is the critical reference source for the growing field of engineering education research, featuring the work of world luminaries writing to define and inform this emerging field. The Handbook draws extensively on contemporary research in the learning sciences, examining how technology affects learners and learning environments, and the role of social context in learning. Since a landmark issue of the Journal of Engineering Education (2005), in which senior scholars argued for a stronger theoretical and empirically driven agenda, engineering education has quickly emerged as a research-driven field increasing in both theoretical and empirical work drawing on many social science disciplines, disciplinary engineering knowledge, and computing. The Handbook is based on the research agenda from a series of interdisciplinary colloquia funded by the US National Science Foundation and published in the Journal of Engineering Education in October 2006.
Download or read book Engineering written by Unesco and published by UNESCO. This book was released on 2010-01-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report reviews engineering's importance to human, economic, social and cultural development and in addressing the UN Millennium Development Goals. Engineering tends to be viewed as a national issue, but engineering knowledge, companies, conferences and journals, all demonstrate that it is as international as science. The report reviews the role of engineering in development, and covers issues including poverty reduction, sustainable development, climate change mitigation and adaptation. It presents the various fields of engineering around the world and is intended to identify issues and challenges facing engineering, promote better understanding of engineering and its role, and highlight ways of making engineering more attractive to young people, especially women.--Publisher's description.
Download or read book Compendium of Sanitation Systems and Technologies written by Elizabeth Tilley and published by . This book was released on 2014 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eat Sleep Bagpipes Repeat written by Mirako Press and published by Createspace Independent Publishing Platform. This book was released on 2018-07-18 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This adorable music notebook is perfect for staffs, kids and musicians. The high-quality manuscript book includes 110 pages of 12 staves. Let exercise your composing skills with this well-designed music sketchbook! Enjoy!
Download or read book Some Nanomaterials and Some Fibres written by International Agency for Research on Cancer and published by IARC Monographs on the Evaluat. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the IARC Monographs provides an assessment of the carcinogenicity of fluoro-edenite fibrous amphibole, silicon carbide fibres and whiskers, and carbon nanotubes, including single-walled and multiwalled types. None of these agents had been assessed previously by the IARC Monographs Working Group. The Working Group relied mainly on epidemiological studies to evaluate the carcinogenic hazard to humans exposed to fluoro-edenite fibrous amphibole, an environmental contaminant that was reported to cause mesothelioma in the regional population of Biancavilla, Sicily, Italy. Silicon carbide fibres are by-products of the manufacture of silicon carbide particles by the Acheson process; silicon carbide whiskers are produced by other processes. The evaluations of the fibres and of the occupational exposures associated with the Acheson process were mainly based on epidemiological studies, whereas the assessment of the whiskers--in the absence of epidemiological--was based on carcinogenicity bioassays and consideration of their physical properties. In view of the absence of epidemiological studies on carbon nanotubes and the limited information available from mechanistic data, the evaluations of single-walled and multiwalled carbon nanotubes relied essentially on carcinogenicity bioassays.
