Download or read book Vacuum Infusion VI Process Modeling and Material Characterization with Viscoelastic Compaction Models written by Bekir Yenilmez and published by . This book was released on 2014 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Fibre Reinforced Polymer FRP Composites for Structural Applications written by Jiping Bai and published by Elsevier. This book was released on 2013-09-30 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced fibre-reinforced polymer (FRP) composites have become essential materials for the building of new structures and for the repair of existing infrastructure. Advanced fibre-reinforced polymer (FRP) composites for structural applications provides an overview of different advanced FRP composites and the use of these materials in a variety of application areas.Part one introduces materials used in the creation of advanced FRP composites including polyester, vinylester and epoxy resins. Part two goes on to explore the processing and fabrication of advanced FRP composites and includes chapters on prepreg processing and filament winding processes. Part three highlights properties of advanced FRP composites and explores how performance can be managed and tested. Applications of advanced FRP composites, including bridge engineering, pipe rehabilitation in the oil and gas industry and sustainable energy production, are discussed in part four.With its distinguished editor and international team of expert contributors, Advanced fibre-reinforced polymer (FRP) composites for structural applications is a technical resource for researchers and engineers using advanced FRP composites, as well as professionals requiring an understanding of the production and properties of advanced FRP composites, and academics interested in this field. - Provides an overview of different advanced FRP composites and the use of these materials in a variety of application areas - Introduces materials used in the creation of advanced FRP composites including polyester, vinylester and epoxy resins - Explores the processing and fabrication of advanced FRP composites and includes chapters on prepreg processing and filament winding processes
Download or read book Process Modeling in Composites Manufacturing written by Suresh G. Advani and published by CRC Press. This book was released on 2010-07-14 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a wealth of literature on modeling and simulation of polymer composite manufacturing processes. However, existing books neglect to provide a systematic explanation of how to formulate and apply science-based models in polymer composite manufacturing processes. Process Modeling in Composites Manufacturing, Second Edition provides tangible m
Download or read book Process simulation of wet compression moulding for continuous fibre reinforced polymers written by Poppe, Christian Timo and published by KIT Scientific Publishing. This book was released on 2022-07-18 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interdisciplinary development approaches for system-efficient lightweight design unite a comprehensive understanding of materials, processes and methods. This applies particularly to continuous fibre-reinforced plastics (CoFRPs), which offer high weight-specific material properties and enable load path-optimised designs. This thesis is dedicated to understanding and modelling Wet Compression Moulding (WCM) to facilitate large-volume production of CoFRP structural components.
Download or read book Composites and Their Properties written by Ning Hu and published by BoD – Books on Demand. This book was released on 2012-08-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are a class of material, which receives much attention not only because it is on the cutting edge of active material research fields due to appearance of many new types of composites, e.g., nanocomposites and bio-medical composites, but also because there are a great deal of promises for their potential applications in various industries ranging from aerospace to construction due to their various outstanding properties. This book mainly deals with fabrication and property characterization of various composites by focusing on the following topics: functional and structural nanocomposites, numerical and theoretical modelling of various damages in long fiber reinforced composites and textile composites, design, processing and manufacturing technologies and their effects on mechanical properties of composites, characterization of mechanical and physical properties of various composites, and metal and ceramic matrix composites. This book has been divided into five sections to cover the above contents.
Download or read book Thermomechanical Industrial Processes written by Jean-Michel Bergheau and published by John Wiley & Sons. This book was released on 2014-02-19 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical simulation of manufacturing processes and of their mechanical consequences is of growing interest in industry. However, such simulations need the modeling of couplings between several physical phenomena such as heat transfer, material transformations and solid or fluid mechanics, as well as to be adapted to numerical methodologies. This book gathers a state of the art on how to simulate industrial processes, what data are needed and what numerical simulation can bring. Assembling processes such as welding and friction stir welding, material removal processes, elaboration processes of composite structures, sintering processes, surface-finishing techniques, and thermo-chemical treatments are investigated. This book is the work of a group of researchers who have been working together in this field for more than 12 years. It should prove useful for both those working in industry and those studying the numerical methods applied to multiphysics problems encountered in manufacturing processes.
Download or read book CT Scan Generated Material Twins for Composites Manufacturing in Industry 4 0 written by Muhammad A. Ali and published by Springer Nature. This book was released on 2020-10-06 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a novel and robust platform in the form of in-situ characterization setup for creating X-ray computed tomography (XCT)-based textile material twins. In this hybrid experimental–numerical platform, XCT images of different complex fibrous reinforcements at different levels of compaction are acquired. The images are converted into computational models for resin flow simulations. The capabilities of this hybrid framework are applied to a variety of reinforcements used in liquid composite molding processes such as 2D, 3D fabrics and dry tapes. This book is a milestone in the development of virtual manufacturing protocols using material twins of textiles, providing a step closer to the digitalization of advanced composites used in manufacturing processes for industry 4.0.
Download or read book Advances in Composites Manufacturing and Process Design written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2015-07-29 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. - Outlines the advances in the different methods of composite manufacturing processes - Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs - Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration
Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book ECO COMPASS written by Xiaosu Yi and published by MDPI. This book was released on 2019-04-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, mainly man-made materials, such as carbon and glass fibers, are used to produce composite parts in aviation. Renewable materials, such as natural fibers or bio-sourced resin systems, have not yet found their way into aviation. The project ECO-COMPASS aims to evaluate the potential applications of ecologically improved composite materials in the aviation sector in an international collaboration of Chinese and European partners. Natural fibers such as flax and ramie will be used for different types of reinforcements and sandwich cores. Furthermore, bio-based epoxy resins to substitute bisphenol-A based epoxy resins in secondary structures are under investigation. Adapted material protection technologies to reduce environmental influence and to improve fire resistance are needed to fulfil the demanding safety requirements in aviation. Modelling and simulation of chosen eco-composites aims for an optimized use of materials while a Life Cycle Assessment aims to prove the ecological advantages compared to synthetic state-of-the-art materials. This Special Issue provides selected papers from the project consortium partners.
Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental
Download or read book Composite Materials Engineering Volume 1 written by Xiao-Su Yi and published by Springer. This book was released on 2017-11-02 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of two volumes providing comprehensive coverage of the fundamental knowledge and technology of composite materials. It covers a variety of design, fabrication and characterization methods as applied to composite materials, particularly focusing on the fiber-reinforcement mechanism and related examples. It is ideal for graduate students, researchers, and professionals in the fields of Materials Science and Engineering, and Mechanical Engineering.
Download or read book Processing of Composites written by Raju S. Davé and published by Hanser Gardner Publications. This book was released on 2000 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites have been acclaimed to be the "Materials of the Future," Advanced polymer composites, once destined for stealth military aircraft or aerospace uses, are beginning to be used in down-to-earth structures such as bridges, building and highways. The objectives of this book are to provide a quick overview of the fundamental principles underlying composite processing and to summarize the most important processes for composite manufacturing. This book is particularly valuable for students as a graduate-level textbook and practitioners who struggle to optimize these processes.
Download or read book Introduction to Glass Science and Technology written by James E Shelby and published by Royal Society of Chemistry. This book was released on 2015-11-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.
Download or read book Composite Reinforcements for Optimum Performance written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2020-10-22 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Reinforcements for Optimum Performance, Second Edition, has been brought fully up to date with the latest developments in the field. It reviews the materials, properties and modelling techniques used in composite production and highlights their uses in optimizing performance. Part I covers materials for reinforcements in composites, including chapters on fibers, carbon nanotubes and ceramics as reinforcement materials. In Part II, different types of structures for reinforcements are discussed, with chapters covering woven and braided reinforcements, three-dimensional fibre structures and two methods of modelling the geometry of textile reinforcements: WiseTex and TexGen. Part III focuses on the properties of composite reinforcements, with chapters on topics such as in-plane shear properties, transverse compression, bending and permeability properties. Finally, Part IV covers the characterization and modelling of reinforcements in composites, with chapters focusing on microscopic and mesoscopic approaches, X-ray tomography analysis and modelling reinforcement forming processes. With its distinguished editor and international team of contributors, Composite Reinforcements for Optimum Performance, Second Edition, is an essential reference for designers and engineers working in the composite and composite reinforcement manufacturing industry, as well as all those with an academic research interest in the subject. - Discusses the characterization and modeling of reinforcements in composites, focusing on such topics as microscopic and mesoscopic approaches, X-ray tomography analysis, and modeling reinforcement forming processes - Provides comprehensive coverage of the types and properties of reinforcement in composites, along with their production and performance optimization - Includes sections on NCF (non-crimp fabrics), natural fiber reinforcements, tufting composite reinforcements, sustainability, multiscale modeling, knitted reinforcements, and more
Download or read book Advanced Technology for Design and Fabrication of Composite Materials and Structures written by George C. Sih and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has seen a significant growth in the processing and fabrication of advanced composite materials. This volume contains the up-to-date contributions of those with working experience in the automotive, marine, aerospace and construction field. Starting with modern technologies concerned with assessing the change in material microstructure in terms of the processing parameters, methodologies are offered to account for tradeoffs between the fundamental variables such as temperature and pressure that control the product quality. The book contains new ideas and data, not available in the open literature.
