Download or read book V band Low Noise Amplifier and Mixer Design Using 90 Nm CMOS Technology written by Andrea Malignaggi and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Low Noise Amplifiers for Single and Multiband Applications A Comprehensive Design Approach written by Norlaili Mohd Noh, Farshad Eshghabadi, Arjuna Marzuki and published by Penerbit USM. This book was released on 2023-10-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

Download or read book Low Noise Wide Band Amplifiers in Bipolar and CMOS Technologies written by Zhong Yuan Chong and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design has grown in importance because so many circuits cannot be realized with digital techniques. Examples are receiver front-ends, particle detector circuits, etc. Actually, all circuits which require high precision, high speed and low power consumption need analog solutions. High precision also needs low noise. Much has been written already on low noise design and optimization for low noise. Very little is available however if the source is not resistive but capacitive or inductive as is the case with antennas or semiconductor detectors. This book provides design techniques for these types of optimization. This book is thus intended firstly for engineers on senior or graduate level who have already designed their first operational amplifiers and want to go further. It is especially for engineers who do not want just a circuit but the best circuit. Design techniques are given that lead to the best performance within a certain technology. Moreover, this is done for all important technologies such as bipolar, CMOS and BiCMOS. Secondly, this book is intended for engineers who want to understand what they are doing. The design techniques are intended to provide insight. In this way, the design techniques can easily be extended to other circuits as well. Also, the design techniques form a first step towards design automation. Thirdly, this book is intended for analog design engineers who want to become familiar with both bipolar and CMOS technologies and who want to learn more about which transistor to choose in BiCMOS.

Download or read book An Ultra Wide Band CMOS Low Noise Amplifier Design written by Nahusha Bhadravati Mohankumar and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An RF ultra wide band low noise amplifier designed for the frequency range of 12-18 GHz of operation is presented in this paper. The low noise amplifier is designed using the state-of-the-art complementary metal oxide semiconductor 45 nm technology. Berkeley's Predictive Technology Model (PTM) is used to generate a fairly accurate mathematical model and the SPICE data is implemented into the BSIM 4 version of the Advanced Design Systems (ADS) program. The low noise design strategy is mainly based on the analysis of high frequency CMOS operation. This LNA has two stages: the first stage is a RL feedback amplifier with an inductive load, and the second stage is a RC feedback amplifier with an inductive load. High frequency small signal MOSFET models with shunt-shunt feedback are used to determine the input impedance, output impedance and gain equations governing this circuit. Simulation results of this two stage feedback amplifier demonstrate a gain of 19 dB over a 6 GHz bandwidth, high linearity, and a low noise figure-less than 2.4 dB. This is a low voltage high current amplifier which requires a supply voltage of simply 0.5 V and has low power consumption (~13.5 mW).

Download or read book RF Frontend Design for Process Variation Tolerant Receivers written by Pooyan Sakian and published by Springer Science & Business Media. This book was released on 2012-02-18 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses wireless receiver design challenges, given the shrinking of circuitry into ever-smaller sizes and resulting complications on manufacturability, production yield and end price of the products. Includes countermeasures for RF designers.

Download or read book Design and Analysis of V band CMOS Low Noise Amplifier and Wideband RF Power Detector for Built in Self test Technique written by 賈士卜 and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Analog and Mixed Signal Circuit Design written by Arjuna Marzuki and published by CRC Press. This book was released on 2020-05-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practical knowledge of CMOS analog and mixed-signal circuit design. Includes recent research in CMOS color and image sensor technology. Discusses sub-blocks of typical analog and mixed-signal IC products. Illustrates several design examples of analog circuits together with layout. Describes integrating based CMOS color circuit.

Download or read book Design of Low Noise Amplifiers for Ultra Wideband Communications written by Roberto Díaz Ortega and published by McGraw Hill Professional. This book was released on 2014-01-13 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge techniques for ultra-wideband, low-noise amplifier design This pioneering resource presents alternatives for implementing power- and area-efficient integrated low-noise amplifiers for ultra-wideband communications. Design methodologies for distributed amplifiers, feedback amplifiers, inductor structures with reduced area, and inductorless techniques are discussed. Cowritten by international experts in industry and academia, this book addresses the state of the art in integrated circuit design in the context of emerging systems. Design of Low-Noise Amplifiers for Ultra-Wideband Communications covers: Ultra-wideband overview and system approach Distributed amplifiers Wideband low-noise amplifiers Feedback wideband low-noise amplifiers Inductorless techniques

Download or read book Analog Circuit Design written by Herman Casier and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Circuit Design is based on the yearly Advances in Analog Circuit Design workshop. The aim of the workshop is to bring together designers of advanced analogue and RF circuits for the purpose of studying and discussing new possibilities and future developments in this field. Selected topics for AACD 2007 were: (1) Sensors, Actuators and Power Drivers for the Automotive and Industrial Environment; (2) Integrated PA's from Wireline to RF; (3) Very High Frequency Front Ends.

Download or read book Proceedings of the International Conference on Microelectronics Computing Communication Systems written by Vijay Nath and published by Springer. This book was released on 2017-12-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers from the International Conference on Microelectronics, Computing & Communication Systems(MCCS 2015). Electrical, Electronics, Computer, Communication and Information Technology and their applications in business, academic, industry and other allied areas. The main aim of this volume is to bring together content from international scientists, researchers, engineers from both academia and the industry. The contents of this volume will prove useful to researchers, professionals, and students alike.

Download or read book Parametric Analog Signal Amplification Applied to Nanoscale CMOS Technologies written by Joao Oliveira and published by Springer Science & Business Media. This book was released on 2012-01-06 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the analysis of parametric amplification with special emphasis on the MOS discrete-time implementation. This implementation is demonstrated by the presentation of several circuits where the MOS parametric amplifier cell is used: small gain amplifier, comparator with embedded pre-amplification, discrete-time mixer/IIR-Filter, and analog-to-digital converter (ADC). Experimental results are shown to validate the overall design technique.

Download or read book Wideband Low Noise Amplifiers Exploiting Thermal Noise Cancellation written by Federico Bruccoleri and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Noise Amplifiers (LNAs) are commonly used to amplify signals that are too weak for direct processing for example in radio or cable receivers. Traditionally, low noise amplifiers are implemented via tuned amplifiers, exploiting inductors and capacitors in resonating LC-circuits. This can render very low noise but only in a relatively narrow frequency band close to resonance. There is a clear trend to use more bandwidth for communication, both via cables (e.g. cable TV, internet) and wireless links (e.g. satellite links and Ultra Wideband Band). Hence wideband low-noise amplifier techniques are very much needed. Wideband Low Noise Amplifiers Exploiting Thermal Noise Cancellation explores techniques to realize wideband amplifiers, capable of impedance matching and still achieving a low noise figure well below 3dB. This can be achieved with a new noise cancelling technique as described in this book. By using this technique, the thermal noise of the input transistor of the LNA can be cancelled while the wanted signal is amplified! The book gives a detailed analysis of this technique and presents several new amplifier circuits. This book is directly relevant for IC designers and researchers working on integrated transceivers. Although the focus is on CMOS circuits, the techniques can just as well be applied to other IC technologies, e.g. bipolar and GaAs, and even in discrete component technologies.

Download or read book RF Circuits for 5G Applications written by Sangeeta Singh and published by John Wiley & Sons. This book was released on 2023-03-10 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF CIRCUITS FOR 5G APPLICATIONS This book addresses FinFET-based analog IC designing for fifth generation (5G) communication networks and highlights the latest advances, problems, and challenges while presenting the latest research results in the field of mmwave integrated circuits designing. The wireless communication sector is experiencing exponential expansion, particularly in the areas of mobile data and the 5G mobile network, creating fresh market possibilities for designing the integrated circuits (ICs) needed in the industry. Drawing from scientific literature and practical realization, this book explores FinFET-based analog IC designing for 5G communication networks and considers the latest breakthroughs and obstacles. It also presents the recent research trends and future roadmaps for the 5G communication circuits. RF Circuits for 5G Applications includes design guidelines to be considered when designing these circuits and detrimental scaling effects of the same. In addition, to enhance the usability of this book, the editors have included real-time problems in RFIC designing and case studies from experimental results, as well as clearly demarcated design guidelines for the 5G communication ICs designing. Audience The primary target audience includes researchers, postgraduate students, and industry professionals pursuing specializations in RF engineering, electronics engineering, electrical engineering, information, and communication technology.

Download or read book Nanometer CMOS RFICs for Mobile TV Applications written by Ahmed A. Youssef and published by Springer Science & Business Media. This book was released on 2010-06-17 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanometer CMOS RFICs for Mobile TV Applications focuses on how to break the trade-off between power consumption and performance (linearity and noise figure) by optimizing the mobile TV front-end dynamic range in three hierarchical levels: the intrinsic MOSFET level, the circuit level, and the architectural level. It begins by discussing the fundamental concepts of MOSFET dynamic range, including nonlinearity and noise. It then moves to the circuit level introducing the challenges associated with designing wide-dynamic range, variable-gain, broadband low-noise amplifiers (LNAs). The book gives a detailed analysis of a new noise-canceling technique that helps CMOS LNAs achieve a sub - 2 dB wideband noise figure. Lastly, the book deals with the front-end dynamic range optimization process from the systems perspective by introducing the active and passive automatic gain control (AGC) mechanism.

Download or read book Low noise and Low power CMOS Amplifiers Analog Front ends and Systems for Biomedical Signal Acquisition written by Jakob M. Tomasik and published by Logos Verlag Berlin. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes the analysis, design and realisation of biomedical amplifiers and analog front-end building blocks implemented in CMOS technology. In this context, a 1.2 V, 130 nm CMOS operational amplifier design is presented which allows to adjust its noise and power specifications. The amplifier and front-end concepts were used in the design of biomedical system-on-chip solutions that include calibration and DC-offset supression techniques.

Download or read book Some Design Techniques for Low Power Low Noise CMOS Amplifier with Noise Optimization for Wireless Application in GHz Frequencies written by M. Zamin Khan and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there have been growing demands for bandwidth, for both voice and data communications. The Radio Frequency integrated circuit (RFIC) and wireless market has suddenly expanded to unimaginable dimensions. Historically, RFIC's are implemented in III-V compounded semiconductors or in bipolar technologies. The DSP circuits, on the other hand, require small feature sizes to guarantee high speed of operation with low power consumption, hence the use of Complementary Metal-Oxide Semiconductor (CMOS) technologies. The challenges are not only to design RF transceivers in CMOS processes, but also to establish design methodologies for their building blocks. This thesis is concerned with one of the main building blocks, namely the Low Noise Amplifier (LNA). Several low Voltage LNA's have been successfully implemented in a standard 0.18 um CMOS technology, operating in the 2.4-5 GHz frequency band. A new and very simple low voltage common source-common gate topology is suggested for low power consumption. The simulated results show the proposed topology is to be the choice in today's low power design with good performance in all aspects, when compared to other topologies.

Download or read book 22 32 GHz Low Noise Amplifier Design in 22 nm CMOS SOI Technology written by Bolun Cui and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis explores the use of a 22-nm CMOS-SOI technology in the design of a two-stage amplifier which targets wide bandwidth, low noise and modest linearity in the 28 GHz band. A design methodology with a transformer-coupled, noise-matching interstage is presented for minimizing the noise factor of the two-stage amplifier. Furthermore, benefits of interstage noise matching are discussed. Next, a transistor layout for minimizing noise and maintaining sufficient electromigration reliability is described. It is followed by an analysis of transformer configurations and a transformer layout example is depicted. To verify the design methodology, two amplifier prototypes with noise-matching interstage were fabricated. Measurement shows that the first design achieves a peak gain of 20.7 dB and better-than-10-dB input and output return losses within a frequency range of 22.5 to 32.2 GHz. The lowest noise figure of 1.81 dB is achieved within the frequency range. Input IP3 of -13.4 dBm is achieved with the cost of 17.3 mW DC power consumption. When the bias at the back-gate is lowered from 2 V to 0.62 V, the power consumption is decreased to 5.6 mW and the peak gain drops down to 17.9 dB. Minimum noise figure increases from 1.81 to 2.13 dB and input IP3 drops to -14.4 dBm. The folded output stage in the second design improves the input IP3 to -6.7 dBm at the cost of 35 mW total power consumption. The peak gain of the second design is 20.1 dB, and the lowest noise figure of 1.73 dB within a frequency range of 23.8 to 32.4 GHz. Both designs occupy about 0.05 mm2 active area.