Download or read book Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements written by Xueyan Liu and published by CRC Press. This book was released on 2021-12-24 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements contains 124 papers from 14 different countries which were presented at the 5th International Symposium on Frontiers of Road and Airport Engineering (IFRAE 2021, Delft, the Netherlands, 12-14 July 2021). The contributions focus on research in the areas of "Circular, Sustainable and Smart Airport and Highway Pavement" and collects the state-of-the-art and state-of-practice areas of long-life and circular materials for sustainable, cost-effective smart airport and highway pavement design and construction. The main areas covered by the book include: • Green and sustainable pavement materials • Recycling technology • Warm & cold mix asphalt materials • Functional pavement design • Self-healing pavement materials • Eco-efficiency pavement materials • Pavement preservation, maintenance and rehabilitation • Smart pavement materials and structures • Safety technology for smart roads • Pavement monitoring and big data analysis • Role of transportation engineering in future pavements Green and Intelligent Technologies for Sustainable and Smart Asphalt Pavements aims at researchers, practitioners, and administrators interested in new materials and innovative technologies for achieving sustainable and renewable pavement materials and design methods, and for those involved or working in the broader field of pavement engineering.
Download or read book Waste Materials and By Products in Concrete written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.
Download or read book Hot mix Asphalt Mixtures written by and published by . This book was released on 1999 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BITUMINOUS concrete mixes written by and published by . This book was released on 1967 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Treatment and Utilization of Combustion and Incineration Residues written by Lei Wang and published by Elsevier. This book was released on 2024-05-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatment and Utilization of Combustion and Incineration Residues introduces state-of-art strategies for combustion and incineration solid residue management and utilization. The book also reviews current technologies for pollutant removal and control of combustion and incineration residues. Recycling ashes and slags in sustainable construction materials are also evaluated on environmental impacts and engineering values, and the use of different ashes and slags in cement clinker production is classified based on the sources and properties of the residues. In addition, the recovery of valuable metals and inorganic elements is also discussed. Finally, Treatment and Utilization of Combustion and Incineration Residues examines the latest understanding of reaction mechanisms of various treatment technologies is elaborated to foster the future design of treatment technologies and the actualization of sustainable management for combustion/incineration residues. - Provides systematical classification and introduction of combustion/incineration solid residues - Introduces the detoxification and purification technologies of hazardous combustion/incineration ashes and slags - Highlights the treatment and recycling approaches of combustion and incineration residues in cement clinker production and sustainable construction materials manufacture - Provides systematical classification and introduction of combustion/incineration solid residues - Introduces the detoxification and purification technologies of hazardous combustion/incineration ashes and slags - Highlights the treatment and recycling approaches of combustion and incineration residues in cement clinker production and sustainable construction materials manufacture
Download or read book Recycled Aggregate in Concrete written by Jorge de Brito and published by Springer Science & Business Media. This book was released on 2012-11-28 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is the most used man-made material in the world since its invention. The widespread use of this material has led to continuous developments such as ultra-high strength concrete and self-compacting concrete. Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste focuses on the recent development which the use of various types of recycled waste materials as aggregate in the production of various types of concrete. By drawing together information and data from various fields and sources, Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste provides full coverage of this subject. Divided into two parts, a compilation of varied literature data related to the use of various types of industrial waste as aggregates in concrete is followed by a discussion of the use of construction and demolition waste as aggregate in concrete. The properties of the aggregates and their effect on various concrete properties are presented, and the quantitative procedure to estimate the properties of concrete containing construction and demolition waste as aggregates is explained. Current codes and practices developed in various countries to use construction and demolition waste as aggregates in concrete and issues related to the sustainability of cement and concrete production are also discussed. The comprehensive information presented in Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste will be helpful to graduate students, researchers and concrete technologists. The collected data will also be an essential reference for practicing engineers who face problems concerning the use of these materials in concrete production.
Download or read book Solid Waste Technology and Management written by Thomas Christensen and published by John Wiley & Sons. This book was released on 2011-08-02 with total page 1196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection, transportation and subsequent processing of waste materials is a vast field of study which incorporates technical, social, legal, economic, environmental and regulatory issues. Common waste management practices include landfilling, biological treatment, incineration, and recycling – all boasting advantages and disadvantages. Waste management has changed significantly over the past ten years, with an increased focus on integrated waste management and life-cycle assessment (LCA), with the aim of reducing the reliance on landfill with its obvious environmental concerns in favour of greener solutions. With contributions from more than seventy internationally known experts presented in two volumes and backed by the International Waste Working Group and the International Solid Waste Association, detailed chapters cover: Waste Generation and Characterization Life Cycle Assessment of Waste Management Systems Waste Minimization Material Recycling Waste Collection Mechanical Treatment and Separation Thermal Treatment Biological Treatment Landfilling Special and Hazardous Waste Solid Waste Technology & Management is a balanced and detailed account of all aspects of municipal solid waste management, treatment and disposal, covering both engineering and management aspects with an overarching emphasis on the life-cycle approach.
Download or read book Advances in Materials and Pavement Prediction written by Eyad Masad and published by CRC Press. This book was released on 2018-07-16 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Materials and Pavement Performance Prediction contains the papers presented at the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P, Doha, Qatar, 16- 18 April 2018). There has been an increasing emphasis internationally in the design and construction of sustainable pavement systems. Advances in Materials and Pavement Prediction reflects this development highlighting various approaches to predict pavement performance. The contributions discuss links and interactions between material characterization methods, empirical predictions, mechanistic modeling, and statistically-sound calibration and validation methods. There is also emphasis on comparisons between modeling results and observed performance. The topics of the book include (but are not limited to): • Experimental laboratory material characterization • Field measurements and in situ material characterization • Constitutive modeling and simulation • Innovative pavement materials and interface systems • Non-destructive measurement techniques • Surface characterization, tire-surface interaction, pavement noise • Pavement rehabilitation • Case studies Advances in Materials and Pavement Performance Prediction will be of interest to academics and engineers involved in pavement engineering.
Download or read book Advances in Sustainable Construction Materials and Geotechnical Engineering written by Sanjay Kumar Shukla and published by Springer. This book was released on 2019-07-02 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the International Conference on Trends and Recent Advances in Civil Engineering (TRACE 2018). The topics covered include the utilization of industrial by-products as construction materials, sustainable and green materials in construction applications, and latest measures adopted for stabilization techniques. The book also discusses recent advances and techniques related to geotechnical and concrete domain that can be used as a reference guide for various researchers and practitioners around the globe.
Download or read book Carbon Dioxide Mineralization and Utilization written by Pen-Chi Chiang and published by Springer. This book was released on 2017-03-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on an important technology for mineralizing and utilizing CO2 instead of releasing it into the atmosphere. CO2 mineralization and utilization demonstrated in the waste-to-resource supply chain can “reduce carbon dependency, promote resource and energy efficiency, and lessen environmental quality degradation,” thereby reducing environmental risks and increasing economic benefits towards Sustainable Development Goals (SDG). In this book, comprehensive information on CO2 mineralization and utilization via accelerated carbonation technology from theoretical and practical considerations was presented in 20 Chapters. It first introduces the concept of the carbon cycle from the thermodynamic point of view and then discusses principles and applications regarding environmental impact assessment of carbon capture, storage and utilization technologies. After that, it describes the theoretical and practical considerations for “Accelerated Carbonation (Mineralization)” including analytical methods, and systematically presents the carbonation mechanism and modeling (process chemistry, reaction kinetics and mass transfer) and system analysis (design and analysis of experiments, life cycle assessment and cost benefit analysis). It then provides physico-chemical properties of different types of feedstock for CO2 mineralization and then explores the valorization of carbonated products as green materials. Lastly, an integral approach for waste treatment and resource recovery is introduced, and the carbonation system is critically assessed and optimized based on engineering, environmental, and economic (3E) analysis. The book is a valuable resource for readers who take scientific and practical interests in the current and future Accelerated Carbonation Technology for CO2 Mineralization and Utilization.
Download or read book Solid Waste Management written by Ramesha Chandrappa and published by Springer Nature. This book was released on with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Materials Used in Concrete Manufacturing written by Satish Chandra and published by Elsevier. This book was released on 1996-12-31 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The environmental aspects involved in the production and use of cement, concrete and other building materials are of growing importance. CO2 emissions are 0.8-1.3 ton/ton of cement production in dry process. SO2 emission is also very high, but is dependent upon the type of fuel used. Energy consumption is also very high at 100-150 KWT/ton of cement produced. It is costly to erect new cement plants. Substitution of waste materials will conserve dwindling resources, and will avoid the environmental and ecological damages caused by quarrying and exploitation of the raw materials for making cement. To some extent, it will help to solve the problem otherwise encountered in disposing of the wastes. Partial replacement of clinker or portland cement by slag, fly ash, silica fume and natural rock minerals illustrates these aspects. Partial replacement by natural materials that require little or no processing, such as pozzolans, calcined clays, etc., saves energy and decreases emission of gases. The output of waste materials suitable as cement replacement (slags, fly ashes, silica fumes, rice husk ash, etc.) is more than double that of cement production.These waste materials can partly be used, or processed, to produce materials suitable as aggregates or fillers in concrete. These can also be used as clinker raw materials, or processed into cementing systems. New grinding and mixing technology will make the use of these secondary materials simpler. Developments in chemical admixtures: superplasticizers, air entraining agents, etc., help in controlling production techniques and, in achieving the desired properties in concrete.Use of waste products is not only a partial solution to environmental and ecological problems; it significantly improves the microstructure, and consequently the durability properties of concrete, which are difficult to achieve by the use of pure portland cement. The aim is not only to make the cements and concrete less expensive, but to provide a blend of tailored properties of waste materials and portland cements suitable for specified purpose. This requires a better understanding of chemistry, and materials science.There is an increasing demand for better understanding of material properties, as well as better control of the microstructure developing in the construction material, to increase durability. The combination of different binders and modifiers to produce cheaper and more durable building materials will solve to some extent the ecological and environmental problems.
Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.
Download or read book Advances in Construction and Demolition Waste Recycling written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste
Download or read book Advances in Materials Science Research written by Maryann C. Wythers and published by . This book was released on 2019-02-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Materials Science Research. Volume 37 begins by discussing the main properties of poly (methyl methacrylate) bone cements used for orthopaedic surgery. In particular, emphasis is given to the fillers used to modify the solid phase of acrylic formulations, and this strategy is related to changes in their mechanical, biological, and clinical properties. Following this, the authors describe studies on the radiopaque agents of bone cements from 1960 to today. This research is divided into several time frames: 1960-1990, 1990-2000, 2000-2010, and 2010-2018. An outlook for the future studies is also provided. A recent literature analysis in the field of spray pyrolysis production methods is presented, including the respective equipment requirements and the versatility of the materials. Examples of the application of ultrasonic spray nebulizers, laser and plasma atomizers are also provided. Next, a facile spray pyrolysis from a precursor solution with an ammonium additive is introduced to prepare porous nanostructured vanadium pentoxides. The correlation between porous structures and electrochemical properties of the PN-V2O5 electrodes was systematically investigated on rechargeable lithium batteries. Furthermore, some challenges are presented on the design of porous materials produced by spray pyrolysis for the application of lithium sulfur batteries. The authors discuss research on non-contact and non-destructive systems that excite surface acoustic waves using pulsed lasers and detect surface acoustic waves using laser Doppler detectors to observe the changes in the physical properties of the substrate surface. The concluding study focuses on the availability of modified epoxidized palm oil as pressure sensitive adhesives in medical applications. Epoxidized palm oil has been modified to two modifications of acrylation and maleination. Thus, there are requirements need to be met for pressure sensitive adhesive formulation before the curing process.
Download or read book 2023 the 7th International Conference on Energy and Environmental Science written by Jianping Yang and published by Springer Nature. This book was released on 2023-08-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book dedicates to publish exceptionally important and high-quality, agenda-setting research so as to tackle the key global and societal challenges of ensuring the provision of energy and protecting our environment for the future. The book appeals to chemical scientists, chemical and process engineers, energy researchers, bio-scientists, and environmental scientists from across academia, industry, and government. The scope is intentionally broad, and the book recognizes the complexity of issues and challenges relating to energy conversion and storage, alternative fuel technologies, and environmental science. The main topics of this book include but not limit to (1) alternative energy and the environment, (2) assessments of the condition of ecosystems and environmental quality, (3) behavior of and impacts of pollutants in atmosphere, soil, and water, (4) management of ecosystems, environment, and water resources, (5) modeling and regional environmental assessments (includes global change), (6) treatment/restoration of ecosystems, environment, and water resources, and (7) sustainable/renewable energy. All scales of studies and analysis, from impactful fundamental advances to interdisciplinary research across the (bio)chemical, (bio/geo) physical sciences, and chemical engineering disciplines are welcomed. So, this book is linked to the energy-environment nexus and is of significant general interest to our community-spanning readership.
Download or read book Advances in Construction Materials and Sustainable Environment written by Ashok Kumar Gupta and published by Springer Nature. This book was released on 2021-12-14 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the International Conference on Construction Materials and Environment (ICCME 2020). The topics discussed revolve around the identification and utilization of novel construction materials primarily in the areas of structural engineering, geotechnical engineering, transportation engineering, and environmental engineering. The volume presents a compilation of thoroughly studied and utilized sustainable construction materials in different areas of civil engineering. Newly developed testing methodologies, physical modelling methods, numerical studies, and other latest techniques discussed in this book can prove to be useful for researchers and practitioners across the globe.
