Download or read book Using Tool Life Models to Minimize Processing Time in a Flexible Manufacturing System written by Lamond, Bernard and published by Québec : Université Laval, Direction de la recherche, Faculté des sciences de l'administration. This book was released on 1994 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing Tool Magazine Capacity in Flexible Manufacturing Systems with Random Tool Life written by Bernard F.. Lamond and published by Québec : Faculté des sciences de l'administration de l'Université Laval, Direction de la recherche. This book was released on 2005 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Minimizing the Expected Processing Time on a Flexible Machine with Random Tool Lives written by Lamond, Bernard and published by Québec : Faculté des sciences de l'administration de l'Université Laval, Direction de la recherche. This book was released on 2003 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible Manufacturing Systems written by Zubair M. Mohamed and published by Routledge. This book was released on 2018-07-27 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994 this book undertakes a comprehensive study dealing with the effects of machine flexibility, tool magazine capacity, varying production demands and different oeprating policies on the production planning problems. Performance measures such as FMS flexibility, makespan and inventory are used in evaluating the effects. Three measures of FMS flexibility - actual routing flexibility, potential routing flexibility and capacity flexibility are defined and operationalized.

Download or read book Modeling Simulation And Control Of Flexible Manufacturing Systems A Petri Net Approach written by Kurapati Venkatesh and published by World Scientific. This book was released on 1999-01-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Heuristics for Determining Economic Processing Rates in a Flexible Manufacturing System written by Manbir S. Sodhi and published by Québec : Faculté des sciences de l'administration de l'Université Laval, Direction de la recherche. This book was released on 1997 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Flexible Manufacturing written by John E. Lenz and published by . This book was released on 1989 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the basis for a formal flexible manufacturing design procedure, effective color graphics animation of simulation, and an economoc model for inverstment decisions, this important reference takes a fresh look at flexible manufacturing, going beyond computerization and mechanization to develop a unique technology.

Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1986 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1986 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible Manufacturing Systems Recent Developments written by A. Raouf and published by Elsevier. This book was released on 1995-02-09 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Manufacturing Systems (FMS) involve substituting machines capable of performing a wide and redefinable variety of tasks for machines dedicated to the performance of specific tasks. FMS can also be programmed to handle new products, thus extending the machines' life cycles. Thus they represent a change from "standardized goods produced by customized machines" to "customized goods produced by standardized machines". This volume contains new and updated material in this field, and will be of great interest to researchers, managers and students concerned with problems related to flexible manufacturing systems.

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer. This book was released on 2010-10-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operations Research written by Jay E. Aronson and published by IAP. This book was released on 2009-04-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from a conference honoring Gerald L. Thompson, the pioneer of operations research, this volume brings together some of the latest writings of major figures in the field. The volume is divided into four parts: the first part reviews the career and significance of Thompson, the second concentrates on linear and nonlinear optimization, the third looks at network and integer programming, and the fourth provides examples of applications-oriented research in manufacturing. This volume will be an invaluable resource for all scholars and researchers involved in theory and methodology in operations research and management science.

Download or read book Tool and Manufacturing Engineers Handbook Desk Edition written by W. H. Cubberly and published by Society of Manufacturing Engineers. This book was released on 1989 with total page 1253 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMEH Desk Edition presents a unique collection of manufacturing information in one convenient source. Contains selected information from TMEH Volumes 1-5--over 1,200 pages of manufacturing information. A total of 50 chapters cover topics such as machining, forming, materials, finishing, coating, quality control, assembly, and management. Intended for daily use by engineers, managers, consultants, and technicians, novice engineers or students.

Download or read book Tool and Manufacturing Engineers Handbook Continuous Improvement written by Charles Wick and published by Society of Manufacturing Engineers. This book was released on 1983 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the renowned TMEH Series, the book contains hundreds of practical new ways to make continuous improvement work, and keep on working: quality management guidelines, quality and productivity improvement ideas, cost reduction tips, continuous process improvement, plus how to use world class techniques such as TPM, TQM, benchmarking, JIT, activity-based costing, improving customer/supplier relationships, and more. You'll also learn from "best practices" examples for quality training, teamwork, empowerment, self-assessment using Baldrige Quality Award criteria, ISO 9000 audits and certification, and more.

Download or read book Encyclopedia of Operations Research and Management Science written by Saul I. Gass and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operations Research: 1934-1941," 35, 1, 143-152; "British The goal of the Encyclopedia of Operations Research and Operational Research in World War II," 35, 3, 453-470; Management Science is to provide to decision makers and "U. S. Operations Research in World War II," 35, 6, 910-925; problem solvers in business, industry, government and and the 1984 article by Harold Lardner that appeared in academia a comprehensive overview of the wide range of Operations Research: "The Origin of Operational Research," ideas, methodologies, and synergistic forces that combine to 32, 2, 465-475. form the preeminent decision-aiding fields of operations re search and management science (OR/MS). To this end, we The Encyclopedia contains no entries that define the fields enlisted a distinguished international group of academics of operations research and management science. OR and MS and practitioners to contribute articles on subjects for are often equated to one another. If one defines them by the which they are renowned. methodologies they employ, the equation would probably The editors, working with the Encyclopedia's Editorial stand inspection. If one defines them by their historical Advisory Board, surveyed and divided OR/MS into specific developments and the classes of problems they encompass, topics that collectively encompass the foundations, applica the equation becomes fuzzy. The formalism OR grew out of tions, and emerging elements of this ever-changing field. We the operational problems of the British and U. s. military also wanted to establish the close associations that OR/MS efforts in World War II.