Download or read book Using Metering to Perform Energy Management written by George “Buster” Barksdale and published by CRC Press. This book was released on 2024-04-12 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers many helpful analysis tools and processes to assist energy managers (EMs) administer their energy program through their meter management system (MMS). These tools and the corresponding techniques offer opportunities for the EM to optimize their time. If fully utilized, the MMS will allow an EM to reduce field time significantly, as they can perform most of the energy management pre-analysis, benchmarking, data analysis and, in many cases, complete the task of performing a virtual audit remotely from their office. The book covers many instructional areas that are, for the most part, only offered by consulting groups and software vendors as services. Those two groups offer their services for fees and therefore do not publish their ideas or best practices for commercial use. Software vendors provide software analytics whose functional aspects are addressed by our descriptions of the essential tasks in each chapter. This book allows EMs to expand their knowledge of software capabilities by viewing other best practices. Consulting groups offer services in a few areas: basic benchmarking and monitoring-based commissioning (MBCx). These services are considered essential to energy management but are generally implemented as on-site services, which, due to their nature, are much more expensive than a monitoring commissioning (MCx) solution. Monitoring commissioning, in contrast to MBCx, is purely done at the monitoring level and allows you to manage the critical energy measures that comprise the majority of the savings, but without getting into the field testing. Benchmarking is covered much deeper in the book as we show how to benchmark each system within a building. The benchmarking sections show how to automatically analyze each system’s usage into a separate benchmark for baseload, lighting, AC, and fan/pump systems. These systems produce benchmarks so EMs can compare by site, category type, climate zone, etc. We also introduce benchmarks that enable the EM to utilize tools to determine the performance of each system and which are their most significant energy users. These analytics functions are covered to produce results that identify potential energy savings for each energy system.
Download or read book Using Metering to Perform Energy Management written by GEORGE BUSTER. PIERCE BARKSDALE (KECIA K.) and published by . This book was released on 2024-04-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will cover many helpful analysis tools and processes to help energy managers administer their energy program through their meter management system.
Download or read book Using Metering to Perform Energy Management written by George Barksdale and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers many helpful analysis tools and processes to assist energy managers (EMs) administer their energy program through their meter management system (MMS). These tools and the corresponding techniques offer opportunities for the EM to optimize their time. If fully utilized, the MMS will allow an EM to reduce field time significantly, as they can perform most of the energy management pre-analysis, benchmarking, data analysis and, in many cases, complete the task of performing a virtual audit remotely from their office. The book covers many instructional areas that are, for the most part, only offered by consulting groups and software vendors as services. Those two groups offer their services for fees and therefore do not publish their ideas or best practices for commercial use. Software vendors provide software analytics whose functional aspects are addressed by our descriptions of the essential tasks in each chapter. This book allows EMs to expand their knowledge of software capabilities by viewing other best practices. Consulting groups offer services in a few areas: basic benchmarking and monitoring-based commissioning (MBCx). These services are considered essential to energy management but are generally implemented as on-site services, which, due to their nature, are much more expensive than a monitoring commissioning (MCx) solution. Monitoring commissioning, in contrast to MBCx, is purely done at the monitoring level and allows you to manage the critical energy measures that comprise the majority of the savings, but without getting into the field testing. Benchmarking is covered much deeper in the book as we show how to benchmark each system within a building. The benchmarking sections show how to automatically analyze each system0́9s usage into a separate benchmark for baseload, lighting, AC, and fan/pump systems. These systems produce benchmarks so EMs can compare by site, category type, climate zone, etc. We also introduce benchmarks that enable the EM to utilize tools to determine the performance of each system and which are their most significant energy users. These analytics functions are covered to produce results that identify potential energy savings for each energy system.
Download or read book Energy Management in Business written by Kit Oung and published by Routledge. This book was released on 2016-04-29 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: The business benefits of lower energy consumption are clear: lower energy costs, energy tax avoidance, selling excess CO2 credits, immediately adding savings to the bottom line and improved competitiveness. However, with a need to focus on day to day business management activities, implementing energy reduction programmes stretches the capabilities and know-how of responsible managers. Kit Oung’s Energy Management in Business is an expert's guide to energy reduction. It covers four important aspects of managing energy: strategy for successful implementation, available tools and techniques, generating sustainable quick wins and active management involvement. This book offers distilled practical concepts with real life case studies chosen to build insight, and illustrate how managers and engineers can relate to a broad range of energy reduction opportunities. We take energy for granted, like the air we breathe. We need to engage employees with energy management in two ways. In a more general sense, for those using energy for normal working practices, awareness and behaviour change are key. For those with more direct influence over energy using systems, engagement is also fundamental. Energy Management in Business places the process firmly in the context of commercial and industrial business practice. The book is an excellent companion for any organisation seeking ISO 50001 certification and a reduced energy consumption, as well as those that simply wish to better understand the options, strategies and risks that every business now faces.
Download or read book Smart Energy Management for Smart Grids written by Khmaies Ouahada and published by MDPI. This book was released on 2020-03-16 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a contribution from the authors, to share solutions for a better and sustainable power grid. Renewable energy, smart grid security and smart energy management are the main topics discussed in this book.
Download or read book Information Technology for Energy Managers written by Barney L. Capehart and published by CRC Press. This book was released on 2003-11-07 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the basic concepts and principles of Information Technology (IT), this book gives energy managers the knowledge they need to supervise the IT work of a consultant or a vendor. The book provides the necessary information for the energy manager to successfully purchase, install, and operate complex, Web-based energy information and control systems. Filled with comprehensive information, this book addresses the most significant concepts and principles that the typical energy or facility manager might need with emphasis on computer networking, use of facility operation databases, and sharing data using the Web and the TCP/IP communications protocol.
Download or read book Energy Management in Buildings written by David Thorpe and published by Routledge. This book was released on 2013-10-23 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of the energy manager has evolved significantly as the task of cutting greenhouse gas emissions from buildings has become increasingly important. Managers are now technical experts, negotiators, construction project managers, procurement specialists, efficiency advocates and often provide energy services to others. This comprehensive book covers how to: • conduct an energy audit • plan a monitoring and verification strategy • make any energy-saving campaign successful • evaluate and make the financial case for energy-saving measures • make use of free energy for lighting and managing heat loss and gain. It also contains special chapters on: • ventilation, heating and cooling • demand management through automated systems • lighting • most requirements of industrial facilities • regulatory requirements in Britain, Europe and the United States • the use of smart meters and monitoring • how to achieve zero energy buildings • the use of renewable energy. For all professional energy, building and facilities managers, energy consultants, students, trainees and academics. It takes the reader from basic concepts to the latest advanced thinking, with principles applicable anywhere in the world and in any climate.
Download or read book Second in Series on Effect of Federal Tax Laws on the Production Supply and Conservation of Energy written by United States. Congress. House. Committee on Ways and Means. Subcommittee on Select Revenue Measures and published by . This book was released on 2001 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Management Principles written by Craig B. Smith and published by Elsevier. This book was released on 2015-11-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Management Principles: Applications, Benefits, Savings, Second Edition is a comprehensive guide to the fundamental principles and systematic processes of maintaining and improving energy efficiency and reducing waste. Fully revised and updated with analysis of world energy utilization, incentives and utility rates, and new content highlighting how energy efficiency can be achieved through 1 of 16 outlined principles and programs, the book presents cost effective analysis, case studies, global examples, and guidance on building and site auditing. This fully revised edition provides a theoretical basis for conservation, as well as the avenues for its application, and by doing so, outlines the potential for cost reductions through an analysis of inefficiencies. Provides extensive coverage of all major fundamental energy management principles Applies general principles to all major components of energy use, such as HVAC, electrical end use and lighting, and transportation Describes how to initiate an energy management program for a building, a process, a farm or an industrial facility
Download or read book Energy Management Systems written by Giridhar Kini and published by BoD – Books on Demand. This book was released on 2011-08-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises of 13 chapters and is written by experts from industries, and academics from countries such as USA, Canada, Germany, India, Australia, Spain, Italy, Japan, Slovenia, Malaysia, Mexico, etc. This book covers many important aspects of energy management, forecasting, optimization methods and their applications in selected industrial, residential, generation system. This book also captures important aspects of smart grid and photovoltaic system. Some of the key features of books are as follows: Energy management methodology in industrial plant with a case study; Online energy system optimization modelling; Energy optimization case study; Energy demand analysis and forecast; Energy management in intelligent buildings; PV array energy yield case study of Slovenia;Optimal design of cooling water systems; Supercapacitor design methodology for transportation; Locomotive tractive energy resources management; Smart grid and dynamic power management.
Download or read book Handbook of Web Based Energy Information and Control Systems written by Barney L. Capehart and published by CRC Press. This book was released on 2020-12-22 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book promotes the benefits of the development and application of energy information and control systems. This wave of information technology (IT) and web-based energy information and control systems (web based EIS/ECS) continues to roll on with increasing speed and intensity. This handbook presents recent technological advancements in the field, as well as a compilation of the best information from three previous books in this area. The combined thrust of this information is that the highest level functions of the building and facility automation system are delivered by a web based EIS/ECS system that provides energy management, facility management, overall facility operational management and ties in with the enterprise resource management system for the entire facility or the group of facilities being managed.
Download or read book Federal Energy Management written by Mark Gaffigan and published by DIANE Publishing. This book was released on 2009-06 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fed. gov¿t. is the nation's single largest energy consumer, spending approximately $17 billion in FY 2007. A number of statutes and executive orders have established and revised goals directing agencies to reduce energy consumption and greenhouse gas emissions -- such as carbon dioxide, which results from combustion of fossil fuels and natural processes, among other things -- and increase renewable energy use. This report determines the extent to which: (1) fed. agencies met energy efficiency, greenhouse gas emission, and renewable energy goals in FY 2007; (2) fed. agencies have made progress in each of these areas in the recent past; and (3) six selected agencies are poised to meet energy goals into the future. Illus.
Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-08-14 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.
Download or read book Energy Management and Conservation Handbook Second Edition written by Frank Kreith and published by CRC Press. This book was released on 2016-10-03 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is the mainstay of industrial societies, and without an adequate supply of energy the social, political and economic stability of nations is put into jeopardy. With supplies of inexpensive fossil fuels decreasing, and climate change factors becoming more threatening, the need to conserve energy and move steadily to more sustainable energy sources is more urgent than ever before. The updated Second Edition of this successful handbook includes chapters from leading experts on the economics and fiscal management of energy, with a focus on the tools available to advance efficiency and conservation measures. Updated coverage of renewable energy sources, energy storage technologies, energy audits for buildings and building systems, and demand-side management is provided. The appendix of the handbook provides extensive data resources for analysis and calculation.
Download or read book TRAINING IN SMART METERING TECHNOLOGIES FOR CONSTRUCTION SITE MANAGERS written by Elisa Peñalvo López and published by 3Ciencias. This book was released on 2018-03-07 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Systems for Smart Appliances and Energy Management written by Christoph Grimm and published by Springer Science & Business Media. This book was released on 2012-05-31 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction describes embedded systems for smart appliances and energy management. The text combines a multidisciplinary blend of topics from embedded systems, information technology and power engineering.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1981 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
