Download or read book Annular Two Phase Flow written by Geoffrey Hewitt and published by Elsevier. This book was released on 2013-10-22 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.
Download or read book One dimensional Two phase Flow written by Graham B. Wallis and published by . This book was released on 1969 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Science and Technology written by G.F. Hewitt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Download or read book Two Phase Flow Boiling and Condensation written by S. Mostafa Ghiaasiaan and published by Cambridge University Press. This book was released on 2014-08-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.
Download or read book Frontiers and Progress in Multiphase Flow I written by Lixin Cheng and published by Springer Science & Business Media. This book was released on 2014-04-09 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents state-of-the-art of reviews in the field of multiphase flow. In focusses on nonlinear aspects of multiphase flow networks as well as visualization experiments. The first chapter presents nonlinear aspects or deterministic chaos issues in the systems of multi-phase reactors. The second chapter reviews two-phase flow dynamics in combination with complex network theory. The third chapter discusses evaporation mechanism in the wick of copper heat pipes. The last chapter investigates numerically the flow dynamics and heat and mass transfer in the laminar and turbulent boundary layer on the flat vertical plate.
Download or read book Two phase Pressure Drops written by Herbert Stanford Isbin and published by . This book was released on 1954 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Multiphase Flow Science and Technology written by Guan Heng Yeoh and published by Springer. This book was released on 2015-08-10 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides readers with the current cutting edge of multiphase flow technology. It reviews the rapid development of multiphase flow technology, demonstrates the latest development of the technology, and showcase the very latest applications. It provides readers with comprehensive updated reference information covering theory, modelling and numerical methods, design and measurement, and new applications in multiphase flow systems. The Handbook consists of three parts or volumes: 1. Theory: describes the fundamentals including the concepts and definitions of multiphase flows. Classifications of multiphase flows. Basic understanding of different length scales involved – micro/nano, meso and macro. Treatment of such flows by different solution frameworks. 2. Modelling and Measurement: covers both classical and state-of the-art measurement and modelling approaches to resolve different classifications of multiphase flows. 3. Applications: highlights the very latest applications of measurement and modelling approaches in tackling different classification of multiphase flows in a variety of natural, biological and industrial systems and different length scales.
Download or read book Two Phase Gas Liquid Flow in Pipes with Different Orientations written by Afshin J. Ghajar and published by Springer Nature. This book was released on 2020-03-14 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.
Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Two Phase Gas Liquid Flow in Pipes with Different Orientations written by Afshin J. Ghajar and published by Springer. This book was released on 2020-03-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.
Download or read book Gas liquid Flows written by Barry J. Azzopardi and published by Begell House Publishers. This book was released on 2006-01-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermo fluid Dynamics of Two Phase Flow written by Mamoru Ishii and published by Springer Science & Business Media. This book was released on 2006-09-28 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for graduate students, scientists and engineers who need in-depth theoretical foundations to solve two-phase problems in various technological systems. Based on extensive research experiences focused on the fundamental physics of two-phase flow, the authors present the detailed theoretical foundation of multi-phase flow thermo-fluid dynamics as they apply to a variety of scenarios, including nuclear reactor transient and accident analysis, energy systems, power generation systems and even space propulsion.
Download or read book Modelling and Experimentation in Two Phase Flow written by Volfango Bertola and published by Springer. This book was released on 2014-05-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Download or read book AERE R written by and published by . This book was released on 1959 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers
Download or read book Multiphase Flow Handbook Second Edition written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
