Download or read book Up and Running with Autodesk r Inventor r Professional 2017 written by Wasim Younis and published by . This book was released on 2016-07-26 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Edition has been extensively revised, including one new design problem, weld calculator and new shape generator.This book has been written using actual design problems, all of which have greatly benefited from the use of Simulation technology. For each design problem, I have attempted to explain the process of applying Inventor Simulation using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task and using Inventor Simulation.

Download or read book Up and Running with Autodesk r Inventor r Professional 2017 PART 2 Dynamic Simulation written by Wasim Younis and published by . This book was released on 2016-08-10 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written using actual design problems, all of which have greatly benefited from the use of Simulation technology. For each design problem, I have attempted to explain the process of applying Inventor Simulation using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task and using Inventor Simulation. The design problems have been carefully chosen to cover the core aspects and capabilities of Dynamic Simulation and their solutions are universal, so you should be able to apply the knowledge quickly to their own design problems with more confidence.

Download or read book Up and Running with Autodesk Inventor Professional 2020 written by Wasim Younis and published by Independently Published. This book was released on 2019-06-08 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the seventh edition of Up and Running with Autodesk(R) Inventor(R) Professional 2020 - Step by step guide to Engineering Solutions. This edition of the book is completely updated to the current 2020 version.This book has been written using actual design problems, all of which have greatly benefited from the use of Simulation technology. For each design problem, I have attempted to explain the process of applying Stress Analysis using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task and using Stress Analysis. The design problems have been carefully chosen to cover the core aspects and capabilities of Stress and Frame Analysis and their solutions are universal, so you should be able to apply the knowledge quickly to their own design problems with more confidence. The book basically comprises of five sections: Stress Analysis Environment (Chapter 1), Design Problems using Solid Elements (Chapter 2-7), Design Problems using Thin and Solid Elements (Chapter 8-11), Modal Analysis (Chapter 12) and Frame Analysis (Chapter 13 - 16). Chapters 1 & 13 provide an overview of stress, frame, Shape Generator and the user interface and features so that you are well-grounded in core concepts and the software's strengths, weaknesses and work around. Each design problem illustrates a different unique approach and demonstrates different key aspects of the software, making it easier for you pick and choose which design problem you want to cover first; therefore, having read chapter 1 and 13, it is not necessary to follow the rest of the book sequentially. This book is primarily designed for self-paced learning by individuals but can also be used in an instructor-led classroom environment. I hope you will find this book enjoyable and at the same time very beneficial to you and your business. I will be very pleased to receive your feedback, to help me improve future editions. Feel free to email me on [email protected]

Download or read book Up and Running with Autodesk Inventor Professional 2013 written by Wasim Younis and published by . This book was released on 2012-04-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up and Running with Autodesk(r) Inventor(r) Professional 2013 is dedicated to the requirements of Inventor users who need to quickly learn or refresh their skills and apply the stress and frame analysis capabilities of Inventor Professional 2013. Providing clear guidance and all-important real-world tutorials, the step-by-step, heavily-illustrated approach of this book will help designers, engineers, and manufactures of all skill levels become Simulation expertsThis edition of the book comes with 4 new chapters covering the NEW thin elements and how to simulate bolt-preloads. Chapter 1 has also been updated to cover thin elements

Download or read book Up and Running with Autodesk Inventor Professional 2012 written by Wasim Younis and published by Createspace Independent Publishing Platform. This book was released on 2011-05-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up and Running with Autodesk(r)Inventor(r)Professional 2012 is dedicated to the requirements of Inventor users who need to quickly learn or refresh their skills and apply the dynamic simulation capabilities of Inventor Professional 2012. Providing clear guidance and all-important real-world tutorials, the step-by-step, heavily-illustrated approach of this book will help designers, engineers, and manufactures of all skill levels become Simulation experts.Unleash the power of Autodesk(r) Inventor(r) Professional to streamline you product design process with expert guidance, tips and knowledge from a leading simulation trainer* Step-by-step guide to engineering design solutions, with extensive tips and guidance throughout the book.* Learn all about the Dynamic Simulation environment, including the joint creation process using all the methods and tools available.* Key topics including redundancy, export FEA Loads and advanced graphing capabilities are also covered in this edition and much more* Gain confidence in your results fast by analyzing real-life design problems

Download or read book Up and Running with Autodesk Inventor Professional 2020 written by Wasim Younis and published by . This book was released on 2019-07-03 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the seventh edition of Up and Running with Autodesk® Inventor® Professional 2020 - Step by step guide to Engineering Solutions. This edition is completely updated to the current version of the software. It also includes two new chapters on Stress Analysis using loads transferred from Dynamic Simulation.This book has been written using actual design problems, all of which have greatly benefited from the use of Simulation technology. For each design problem, I have attempted to explain the process of applying Dynamic Simulation using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task and using Dynamic Simulation. The design problems have been carefully chosen to cover the core aspects and capabilities of Dynamic Simulation and their solutions are universal, so you should be able to apply the knowledge quickly to your own design problems with more confidence. Chapter 1 provides an overview of Dynamic Simulation and the Inventor Simulation's interface and features so that you are well-grounded in core concepts and the software's strengths, weaknesses and work around. Each design problem illustrates a different unique approach and demonstrates different key aspects of the software, making it easier for you to pick and choose which design problem you want to cover first; therefore, having read chapter 1 it is not necessary to follow the rest of the book sequentially. This book is primarily designed for self-paced learning by individuals but can also be used in an instructor-led classroom environment. I hope you will find this book enjoyable and at the same time very beneficial to you and your business. I will be very pleased to receive your feedback, to help me improve future editions. Feel free to email me on [email protected]

Download or read book Up and Running written by Younis Wasim and published by . This book was released on 2013 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autodesk Inventor 2017 Review for Certification written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2016-03-29 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2017 (R1): Review for Certification is a comprehensive review guide to assist in preparing for the Autodesk Inventor Certified Professional exam. It enables experienced users to review learning content from ASCENT that is related to the exam objectives. New users of the Autodesk(R) Inventor(R) 2017 (R1) software should refer to the following ASCENT student guides: Autodesk(R) Inventor(R) 2017 (R1): Introduction to Solid Modeling Autodesk(R) Inventor(R) 2017 (R1): Advanced Assembly Modeling Autodesk(R) Inventor(R) 2017 (R1): Advanced Part Modeling Autodesk(R) Inventor(R) 2017 (R1): Sheet Metal Design Prerequisites Autodesk(R) Inventor(R) 2017 (R1): Review for Certification is intended for experienced users of the Autodesk Inventor software. Autodesk recommends 400 hours of hands-on software experience prior to taking the Autodesk Inventor Certified Professional exam.

Download or read book Up and Running with Autodesk Inventor Nastran 2020 written by Wasim Younis and published by . This book was released on 2019-06-06 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the 2nd edition of Up and Running with Autodesk(R) Inventor(R) Nastran(R) 2020 - Simulation for Designers.Inventor Nastran 2020 is a very capable and comprehensive simulation program which covers a broad spectrum of analysis applications including, linear, thermal, buckling, non-linear and the list goes on. In this 2nd edition of the book I have added Fatigue Analysis in addition to updating content to account for the new features in Inventor Nastran 2020 initial release. This book has been written using actual design problems, all of which have greatly benefited from the use of simulation technology. For each design problem, I have attempted to explain the process of applying stress analysis using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task using Inventor Nastran. The design problems have been carefully chosen to cover the core aspects and linear analysis capabilities of Inventor Nastran and their solutions are universal, so you should be able to apply the knowledge quickly to your own design problems with more confidence. Chapter 1 provides an overview of Inventor Nastran and the user interface and features so that you are well-grounded in core concepts and the software's strengths, limitations and work around. Each design problem illustrates a different unique approach and demonstrates different key aspects of the software, making it easier for you to pick and choose which design problem you want to cover first; therefore, having read chapter 1 it is not necessary to follow the rest of the book sequentially, Except Chapter 11 and 12.In this edition I have included two new chapters focusing around Fatigue Analysis. Chapter 11 provides an overview of Fatigue, including a hand calculation, and Chapter 12 goes through step by step guidance on how to perform Multi-Axial Fatigue analysis within Inventor Nastran. This book is primarily designed for self-paced learning by individuals but can also be used in an instructor-led classroom environment. I hope you will find this book enjoyable and at the same time very beneficial to you and your business. I will be very pleased to receive your feedback, to help me improve future editions. Feel free to email me on [email protected]

Download or read book Up and Running with Autodesk Inventor Professional 2014 written by Wasim Younis and published by . This book was released on 2013-06-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sean bienvenidos, a la quinta edición de "Autodesk(r) Inventor(r) Professional 2014, su simulación con problemas de diseño reales - Una guía paso a paso con soluciones para el diseño en ingeniería. Quiero expresar mi esperanza de que los lectores encontraran útil e interesante las ediciones anteriores. Es mi deseo agradecerse para sus mensajes y sugerencias, lo que me han resultados muy útiles para lograr que esta segunda edición fuese aún mejor que las anteriores. En esta edición, he incluido el nuevo orden de uniones, lo que se puede usar en el entorno del ensamblaje. Para la composición de este libro se han utilizado auténticos problemas de diseño, y todos han visto las benéficas mediante el uso de las técnicas de simulación. En todos los problemas, se ha tratado de explicar el procedimiento de simulación con Inventor mediante un enfoque riguroso y directo, que se expresa paso a paso, y lo que se sustenta con oportunas explicaciones y diversos trucos y consejos. En todo momento, se ha intentado de anticiparse a las preguntas que pudiera plantearle cualquier diseñador o ingeniero de desarrollo durante la aplicación de los métodos expuestos en InventorSe han sido seleccionados cuidadosamente los problemas de diseño, para lograr una muestra representativa de los principales aspectos y funcionalidades de la Simulación Dinámica, de forma que las soluciones fueran universales, para que se pueda aplicar rápidamente el conocimiento a sus propios problemas de diseño con más confianza

Download or read book Autodesk Inventor 2017 R2 Update for 2015 2016 Users written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2016-10-25 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: TheAutodesk(R) Inventor(R) 2017 (R2) Update for 2015/2016 Users student guide introduces the new concepts and modeling techniques that have been added to both the Autodesk Inventor 2016 and Autodesk(R) Inventor(R) 2017 software releases. The student guide covers enhancements to the most commonly used environments and contains practices for applying the new concepts. It was written to run in the (R2) release of Autodesk Inventor 2017. Topics Covered Interface Enhancements Sketching Enhancements Part Modeling Enhancements Assembly Enhancements Drawing Enhancements Working with Presentations Working with Imported Geometry Generative Shape Design Sheet Metal Enhancements Inventor Studio Enhancements The student guide begins with changes to the overall interface and enhancements that cover settings that pertain to multiple environments. Chapter 2 covers the sketch environment and contains many topics that have been added to ease sketch creation for both 2D and 3D sketches. A number of enhancements have been added to existing and new part modeling tools, which is covered in Chapter 3. Changes have been made to existing features (such extrude, drafts, iFeatures), boundary patch geometry, and a new ruled surface tool. Additionally, the new tools and enhancements for patterning are discussed. Chapters 4, 5, and 6 cover changes to the assembly, drawing, and presentation environments. Few changes were made in the assembly environment; however, the new presentation workflow is explained. The enhancements to the drawing environment will improve drawing creation, as well as how many annotations are created or are modified in a drawing. Chapters 7 and 8 chapters cover new tools for working with imported data and the Generative Shape Design tool. The appendices outline changes made in the Sheet Metal environment (including multi-body sheet metal modeling) and the Inventor Studio environment. Prerequisites This training guide assumes knowledge of the Autodesk(R) Inventor(R) 2015 or 2016 software. Students should know how to create and edit parts, create assemblies, and set up drawing files to create and annotate drawing views.

Download or read book Autodesk Inventor 2018 written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2017-05-05 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autodesk(R) Inventor(R) 2018: Review for Professional Certification is a comprehensive review guide to assist in preparing for the Autodesk Inventor Certified Professional exam. It enables experienced users to review learning content from ASCENT that is related to the exam objectives. New users of the Autodesk(R) Inventor(R) 2018 should refer to the following ASCENT student guides: Autodesk(R) Inventor(R) 2018: Introduction to Solid Modeling Autodesk(R) Inventor(R) 2018: Advanced Assembly Modeling Autodesk(R) Inventor(R) 2018: Advanced Part Modeling Autodesk(R) Inventor(R) 2018: Sheet Metal Design Prerequisites Autodesk(R) Inventor(R) 2018: Review for Professional Certification is intended for experienced users of the Autodesk Inventor software. Autodesk recommends 400 hours of hands-on software experience prior to taking the Autodesk Inventor Certified Professional exam.

Download or read book Up and Running with Autodesk Inventor Professional 2012 written by Wasim Younis and published by Createspace Independent Publishing Platform. This book was released on 2011-04-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is dedicated to the requirements of Inventor Simulation users who need to quickly learn or refresh their skills, and apply the dynamic simulation, assembly analysis, and optimization capabilities of Inventor Simulation 2010.

Download or read book Up and Running with Autodesk Inventor Professional 2014 written by Wasim Younis and published by . This book was released on 2013-05-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written using actual design problems, all of which have greatly benefited from the use of Simulation technology. For each design problem, I have attempted to explain the process of applying Inventor Simulation using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task and using Inventor Simulation. The design problems have been carefully chosen to cover the core aspects and capabilities of Dynamic Simulation and their solutions are universal, so you should be able to apply the knowledge quickly to their own design problems with more confidence

Download or read book Up and Running with Autodesk Inventor Professional 2014 written by Wasim Younis and published by . This book was released on 2013-05-21 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written using actual design problems, all of which have greatly benefited from the use of Simulation technology. For each design problem, I have attempted to explain the process of applying Inventor Simulation using a straightforward, step by step approach, and have supported this approach with explanation and tips. At all times, I have tried to anticipate what questions a designer or development engineer would want to ask whilst he or she were performing the task and using Inventor Simulation. The design problems have been carefully chosen to cover the core aspects and capabilities of Stress and Frame Analysis and their solutions are universal, so you should be able to apply the knowledge quickly to their own design problems with more confidence.

Download or read book Autodesk Inventor 2017 Tube and Pipe Design written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2016-10-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2017 (R2): Tube and Pipe Design student guide instructs students on the use of the Inventor Tube and Pipe environment. Through a hands-on, practice-intensive curriculum, students acquire the knowledge needed to design routed elements, including tubing, piping, and flexible hose. With specific tools to incorporate tube and pipe runs into digital prototypes, the Inventor Tube and Pipe environment provides rules-based routing tools that select the correct fittings and helps the pipe run to comply with your standards for segment length, round-off increments, and bend radius, that the student will learn to maximize. Topics Covered Describe the tube and pipe environment and why you would use it. Set up routes and runs and place the initial fittings in your tube and pipe design. Create, edit, and manage routes for rigid pipe, rigid tube, and flexible hose designs. Manage content libraries, publish custom content to content libraries, and create new styles that use custom content. Document tube and pipe designs through the creation of 2D drawings and parts lists and export the 3D design data. Prerequisites This student guide is designed for experienced users of the Autodesk Inventor software. The following is recommended: Students should have completed the Autodesk(R) Inventor(R) 2017 (R1): Introduction to Solid Modeling student guide, or have an equivalent understanding of the Autodesk Inventor 2017 user interface and working environments. Knowledge of part modeling, assembly modeling, and drawing view creation and annotation, is recommended.

Download or read book Autodesk Inventor 2019 written by ASCENT - Center for Technical Knowledge and published by Ascent, Center for Technical Knowledge. This book was released on 2018-09-25 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Autodesk(R) Inventor(R) 2019: Design Tools and Strategies student guide provides instruction on how to incorporate the use of top-down design and advanced modeling techniques into your design environment. The student guide begins with an introduction to top-down design and the software tools that can be used. There is a focus on multi-body design, deriving components, working with layouts and sketch blocks, and how associative links and adaptive parts can help you incorporate design intent into your models. The student guide also includes chapters that cover Generative Shape Design, Frame Generator, and Design Accelerator, teaching you how you can use these advanced design tools to quickly create designs that meet your requirements. The topics covered in this student guide are also covered in the following ASCENT student guides, which include a broader range of advanced topics: Autodesk(R) Inventor(R) 2019: Advanced Assembly Modeling Autodesk(R) Inventor(R) 2019: Advanced Part Modeling Topics Covered Learn how to enforce design intent using three major top-down design techniques. Create solid bodies and correctly assign features to specific solid bodies. Modify solid bodies in a model by moving, removing, splitting, combining, or redefining them. Create new parts and assemblies from multi-bodies. Derive new geometry in a part by importing and referencing objects from a source part. Create and modify layouts and sketch blocks. Define and test the kinematic motion with the use of nested sketch blocks. Create 3D models from sketch blocks. Specify geometric entities of part features to change, while controlling the size or location of other entities in an assembly. Create a Shape Generator study that sets a goal and criteria to accurately define a model's working environment. Promote a Shape Generator study to the modeling environment. Create structural frames members using a skeletal wireframe part. Adjust frame member ends to obtain required joints. Create and publish custom frame member profiles to the Content Center. Automatically create geometry using component generators. Prerequisites The material covered in this student guide assumes a mastery of Autodesk Inventor basics as taught in the Autodesk Inventor: Introduction to Solid Modeling student guide. Access to the 2019 version of the software. The practices and files included with this guide might not be compatible with prior versions.