Download or read book Unusual Polymer Blends which Exhibit Synergistic Physical Properties written by Hugh Graham and published by . This book was released on 1992 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Biopolymers and Biopolymer Blends written by Abdul Khalil H.P.S. and published by CRC Press. This book was released on 2024-02-16 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer and Biopolymer Blends: Fundamentals, Processes, and Emerging Applications showcases the potential of biopolymers as alternative sources to conventional nonbiodegradable petroleum-based polymers. It discusses fundamentals of biopolymers and biopolymer blends from natural and synthetic sources, synthesis, and characterization. It also describes development of desired performance for specific applications in 3D printing and other emerging applications in industry, including packaging, pulp and paper, agriculture, biomedical, and marine. Introduces the fundamentals, synthesis, processing, and structural and functional properties of biopolymers and biopolymer blends. Explains the fundamental framework of biopolymer blends in 3D printing, featuring current technologies, printing materials, and commercialization of biopolymers in 3D printing. Reviews emerging applications, including active food packaging, electronic, antimicrobial, environmental, and more. Discusses current challenges and futures prospects. Providing readers with a detailed overview of the latest advances in the field and a wealth of applications, this work will appeal to researchers in materials science and engineering, biotechnology, and related disciplines.

Download or read book Advances in Polymer Blends and Alloys Technology written by Kier Finlayson and published by CRC Press. This book was released on 1994-11-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Reports in Volume 5 "Recently polymer blends have emerged as one of the most important areas of research activity in the field of polymer science and technology. Because of their satisfactory performance in meeting specific needs of the polymer industry, they have drawn considerable attention in replacing not only many conventional materials, but also some of the polymers that are in vogue. By suitably varying the blend compositions and manipulating the processing conditions, tailor-made products with a unique set of end use properties can be achieved at a much lower cost and within a shorter time than would have been necessary for the development of a new polymer. The usefulness of such blends increases with the increasing range of applications of this type of materials." (Chapter 4) "New and growing demands on polymeric materials cannot be satisfied in future by an assortment extension of basic polymers. Although the introduction of new major-use basic polymer is possible, it seems unlikely in view of current projected economic and technical considerations. On the other hand, new products based on the modification of existing polymers have and will continue to be fruitful areas for both scientific and commercial developments. The driving forces for these developments are: 1. Improved performance, 2. Reduced cost, 3. Present, pending and future legislation dealing with health and environmental issues." (Chapter 11)

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by Elsevier. This book was released on 2023-11-24 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Sustainability, Materials, and Applications, Third Edition presents the fundamentals of plastics engineering, helping bring readers up-to-speed on new plastics, materials, processing and technology. This revised and expanded edition includes the latest developments in plastics, including areas such as biodegradable and biobased plastics, plastic waste, smart polymers, and 3D printing. Sections cover traditional plastics, elastomeric materials, bio-based materials, additives, colorants, fillers and plastics processing, including various key technologies, plastic recycling and waste. The final part of the book examines design and applications, with substantial updates made to reflect advancements in technology, regulations, and commercialization. Throughout the handbook, the focus is on engineering aspects of producing and using plastics. Properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. Offers an ideal reference for new engineers, experienced practitioners and researchers entering a new field or evaluating a new technology Provides an authoritative source of practical advice, presenting guidance that will lead to cost savings and process improvements Includes the latest technology, covering 3D printing, smart polymers and thorough coverage of biobased and biodegradable plastics

Download or read book High Temperature Polymer Blends written by Mark T. DeMeuse and published by Elsevier. This book was released on 2014-03-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer blends offer properties not easily obtained through the use of a single polymer, including the ability to withstand high temperatures. High Temperature Polymer Blends outlines the characteristics, developments, and use of high temperature polymer blends. The first chapter introduces high temperature polymer blends, their general principles, and thermodynamics. Further chapters go on to deal with the characterization of high temperature polymer blends for specific uses, such as fuel cells and aerospace applications. The book discusses different types of high temperature polymer blends, including liquid crystal polymers, polysulfones, and polybenzimidazole polymer blends and their commercial applications. High Temperature Polymer Blends provides a key reference for material scientists, polymer scientists, chemists, and plastic engineers, as well as academics in these fields. Reviews characterization methods and analysis of the thermodynamic properties of high temperature polymer blends Reviews the use of materials such as liquid crystals as reinforcements as well as applications in such areas as energy and aerospace engineering

Download or read book Advances in Polymer Materials and Technology written by Anandhan Srinivasan and published by CRC Press. This book was released on 2016-08-19 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancements in the field of polymer science and technology. Frontiers areas, such as polymers based on bio-sources, polymer based ferroelectrics, polymer nanocomposites for capacitors, food packaging and electronic packaging, piezoelectric sensors, polymers from renewable resources, superhydrophobic materials and electrospinning are topics of discussion. The contributors to this book are expert researchers from various academic institutes and industries from around the world.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1994 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange

Download or read book Handbook of Engineering and Specialty Thermoplastics Volume 3 written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2011-04-28 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes many of the recent technical research accomplishments in the area of engineering polymers, such as oxygen containing main chain polymers (Polyether and Polyesters). The book emphasizes the various aspects of preparation, structure, processing, morphology, properties and applications of engineering polymers. Recent advances in the development and characterization of multi component polymer blends and composites (maco, micro and nano) based on engineering polymers are discussed in detail. The content of the book is unique as there are no books which deal with the recent advances synthesis, morphology, structure, properties and applications of engineering polymers and their blends and composites including nanocomposites. It covers an up-to-date record on the major findings and observations in the field.

Download or read book Biodegradable Polymer Blends and Composites from Renewable Resources written by Long Yu and published by John Wiley & Sons. This book was released on 2009-03-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodegradable Polymer Blends and Composites from Renewable Resources provides a comprehensive, current overview of biopolymeric blends and composites and their applications in various industries. The book is organized according to the type of blend or composite. For each topic, the relationship between the structure of the blends/composites and their respective properties is explored, with particular focus on interface, compatibility, mechanical, and thermal properties. Real-life applications and potential markets are discussed. This is a premier reference for graduate students and researchers in polymer science, chemical and bio engineering, and materials science.

Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.

Download or read book Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems written by Sabu Thomas and published by William Andrew. This book was released on 2015-09-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. Covers all important information for designing and selecting the right nanostructured polymer system Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

Download or read book Nanostructured Polymer Blends and Composites in Textiles written by Mihai Ciocoiu and published by CRC Press. This book was released on 2016-01-05 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume reviews recent academic and technological developments behind new engineered modified nanotextile materials. The developments in textiles using nanotechnology give ordinary materials improved properties, such as better water resistance, enhanced moisture and odor reduction, increased strength and elasticity, and resistance to bacter

Download or read book Polymer Blend Nanocomposites for Energy Storage Applications written by Sabu Thomas and published by Elsevier. This book was released on 2023-06-27 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Blend Nanocomposites for Energy Storage Applications presents the latest developments in polymer blend-based nanocomposites for applications in energy storage, covering theoretical concepts, preparation methods, characterization techniques, properties and performance. The book begins by introducing polymer blend-based nanocomposites, preparation methods, mechanisms, requirements, theory, modeling, and simulation, with subsequent sections covering the use of specific base materials, including elastomers, thermoplastics, thermoset polymers, and biodegradable polymers. Final sections covers polymer blend nanocomposites with different fillers, both for conducting polymers and non-conducting polymers. Devices discussed include capacitors, supercapacitors, batteries, fuel cells, and solar cells. Finally, other key aspects are considered, including the conversion from laboratory to industry and recycling and lifecycle assessment of polymer blend nanocomposites used in energy devices. Focuses on nanocomposites based on polymer blends, both conducting and non-conducting Guides the reader to applications in capacitors, supercapacitors, batteries, fuel cells, solar cells, and other areas Considers modeling and simulation, translation from lab to industry, recycling, and lifecycle assessment

Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by William Andrew. This book was released on 2007-08-11 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are few if any adequate guides to the properties, processing, and applications of thermoplastic elastomers, in spite the skyrocketing rise in the use of these materials. Until now. This new book sets the standard for a reference on these materials by compiling in one comprehensive volume an applicable knowledge of the chemistry, processing, and all properties, and uses of thermoplastic elastomers. Copiously illustrated and full of applicable processing and engineering data, this is the very definition of a ""definitive"" user's guide.

Download or read book Eco friendly Polymer Nanocomposites written by Vijay Kumar Thakur and published by Springer. This book was released on 2015-06-22 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The content includes industrial applications and will fill the gap between the research works in laboratory to practical applications in related industries.