Download or read book Unsteady Flow Simulation A Numerical Challenge written by Francesco Martelli and published by . This book was released on 2003 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prediction of unsteady flow field in turbine blades as well as in the turbomachinery stages is now an affordable item, and is required by the reduced margin for increasing efficiency, stability and life of propulsion components, The numerical tools are now capable to run within reasonable time 3D unsteady calculation for full stage, and the new techniques on the computation and parallel computer allow the improvements of results in terms of cost and accuracy, Despite these advantages many questions remain open and the physical modelling joint with the numerical improvements is still a challenge if it has to produce usable results, compared with the experiments. Aim of this paper is the report on some experience and the attempt to give some answer on that challenge, presenting results of a recent activity on modelling side compared with experiments as well, A full-3D unstructured solver based on an upwind TVD finite volume scheme has been developed and applied to the simulation of an unsteady turbine stage, The development of the numerical strategy is discussed with particular concern on the validation of the unsteady model through a comparison against experiments, NISRE approach and a 3D steady stage computation, The present work considers the application of the fully unstructured hybrid solver for internal viscous flows, as well, The multiblock version of the solver developed for turbine is considered, because of the highly improved performance as compared to the single domain version of the code, Moreover, the high numerical costs involved in 3D unsteady computations required the development of a new parallel single program multiple-data version of the numerical solver. The results compare favorably with a set of time averaged and unsteady experimental data available for the turbine stage under investigation, which is representative of a wide class of aero-engines.
Download or read book Numerical Simulation of 3 D Incompressible Unsteady Viscous Laminar Flows written by Michel Deville and published by Vieweg+Teubner Verlag. This book was released on 2013-03-09 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The GAMM-Commi ttee for Numerical Methods in Fluid Mechanics (GAMM-Fachausschuss für Numerische Methoden in der Strömungsmechanik) has sponsored the organization of a GAMM Workshop dedicated to the numerical simulation of three dimensional incompressible unsteady viscous laminar flows to test Navier-Stokes solvers. The Workshop was held in Paris from June 12th to June 14th, 1991 at the Ecole Nationale Superieure des Arts et Metiers. Two test problems were set up. The first one is the flow in a driven-lid parallelepipedic cavity at Re = 3200 . The second problem is a flow around a prolate spheroid at incidence. These problems are challenging as fully transient solutions are expected to show up. The difficulties for meaningful calculations come from both space and temporal discretizations which have to be sufficiently accurate to resol ve detailed structures like Taylor-Görtler-like vortices and the appropriate time development. Several research teams from academia and industry tackled the tests using different formulations (veloci ty-pressure, vortici ty velocity), different numerical methods (finite differences, finite volumes, finite elements), various solution algorithms (splitting, coupled ...), various solvers (direct, iterative, semi-iterative) with preconditioners or other numerical speed-up procedures. The results show some scatter and achieve different levels of efficiency. The Workshop was attended by about 25 scientists and drove much interaction between the participants. The contributions in these proceedings are presented in alphabetical order according to the first author, first for the cavi ty problem and then for the prolate spheroid problem. No definite conclusions about benchmark solutions can be drawn.
Download or read book Numerical Simulation of Unsteady Flows and Transition to Turbulence written by O. Pironneau and published by Cambridge University Press. This book was released on 1992-07-31 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop concentrated on the following turbulence test cases: T1 Boundary layer in an S-shaped duct; T2 Periodic array of cylinders in a channel; T3 Transition in a boundary layer under the influence of free-stream turbulence; T4 & T5: Axisymmetric confined jet flows.
Download or read book Numerical Simulations of Incompressible Flows written by M. M. Hafez and published by World Scientific. This book was released on 2003 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of 37 articles dealing with simulation of incompressible flows and applications in many areas. It covers numerical methods and algorithm developments as well as applications in aeronautics and other areas. It represents the state of the art in the field. Contents: NavierOCoStokes Solvers; Projection Methods; Finite Element Methods; Higher-Order Methods; Innovative Methods; Applications in Aeronautics; Applications Beyond Aeronautics; Multiphase and Cavitating Flows; Special Topics. Readership: Researchers and graduate students in computational science and engineering."
Download or read book Numerical Simulations written by Lutz Angermann and published by BoD – Books on Demand. This book was released on 2010-12-30 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will interest researchers, scientists, engineers and graduate students in many disciplines, who make use of mathematical modeling and computer simulation. Although it represents only a small sample of the research activity on numerical simulations, the book will certainly serve as a valuable tool for researchers interested in getting involved in this multidisciplinary field. It will be useful to encourage further experimental and theoretical researches in the above mentioned areas of numerical simulation.
Download or read book Flow Phenomena in Nature A challenge to engineering design written by Roland Liebe and published by WIT Press. This book was released on 2007 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Do we have an adequate understanding of fluid dynamics phenomena in nature and evolution, and what physical models do we need? What can we learn from nature to stimulate innovations in thinking as well as in engineering applications? Concentrating on flight and propulsion, this unique and accessible book compares fluid dynamics solutions in nature with those in engineering. The respected international contributors present up-to-date research in an easy to understand manner, giving common viewpoints from fields such as zoology, engineering, biology, fluid mechanics and physics. Contents: Introduction to Fluid Dynamics; Swimming and Flying in Nature; Generation of Forces in Fluids - Current Understanding; The Finite, Natural Vortex in Steady and Unsteady Fluid Dynamics - New Modelling; Applications in Engineering with Inspirations From Nature; Modern Experimental and Numerical Methods in Fluid Dynamics.
Download or read book Fluid Machinery and Fluid Mechanics written by Jianzhong Xu and published by Springer Science & Business Media. This book was released on 2010-07-05 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE)" is the proceedings of 4th International Symposium on Fluid Machinery and Fluid Engineering, held in Beijing November 24-27, 2008. It contains 69 highly informative technical papers presented at the Mei Lecture session and the technical sessions of the symposium. The Chinese Society of Engineering Thermophysics (CSET) organized the First, the Second and the Third International Symposium on Fluid Machinery and Fluid Engineering (1996, 2000 and 2004). The purpose of the 4th Symposium is to provide a common forum for exchange of scientific and technical information worldwide on fluid machinery and fluid engineering for scientists and engineers. The main subject of this symposium is "Fluid Machinery for Energy Conservation". The "Mei Lecture" reports on the most recent developments of fluid machinery in commemoration of the late professor Mei Zuyan. The book is intended for researchers and engineers in fluid machinery and fluid engineering. Jianzhong Xu is a professor at the Chinese Society of Engineering Thermophysics, Chinese Academy of Sciences, Beijing.
Download or read book Numerical Simulations of Incompressible Flows written by M. M. Hafez and published by World Scientific. This book was released on 2003 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Consists mainly of papers presented at a workshop ... held in Half Moon Bay, California, June 19-21, 2001 ... to honor Dr. Dochan Kwak on the occasion of his 60th birthday ... organized by M. Hafez of University of California Davis and Dong Ho Lee of Seoul National University"--Dedication, p. ix.
Download or read book ICONSEIR 2022 written by Y Yusnadi and published by European Alliance for Innovation. This book was released on 2023-06-23 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th International Conference on Science Education in Industrial Revolution 4.0 (ICONSEIR 4.0) is a forum of scientists, academics, researchers, teachers and observers of education and students of post-graduate who care of education. This event was held by the Faculty of Education, Universitas Negeri Medan, Indonesia, on November 24th, 2022.
Download or read book Numerical Methods for Unsteady Compressible Flow Problems written by Philipp Birken and published by Chapman & Hall/CRC. This book was released on 2021 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods for Unsteady Compressible Flow Problems is written to give both mathematicians and engineers an overview of the state of the art in the field, as well as of new developments. The focus is on methods for the compressible Navier-Stokes equations, the solutions of which can exhibit shocks, boundary layers and turbulence. The idea of the text is to explain the important ideas to the reader, while giving enough detail and pointers to literature to facilitate implementation of methods and application of concepts. The book covers high order methods in space, such as Discontinuous Galerkin methods, and high order methods in time, in particular implicit ones. A large part of the text is reserved to discuss iterative methods for the arising large nonlinear and linear equation systems. Ample space is given to both state-of-the-art multigrid and preconditioned Newton-Krylov schemes. Features Applications to aerospace, high-speed vehicles, heat transfer, and more besides Suitable as a textbook for graduate-level courses in CFD, or as a reference for practitioners in the field
Download or read book New Results in Numerical and Experimental Fluid Mechanics VI written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-26 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features the contributions to the 15th Symposium of the STAB (German Aerospace Aerodynamics Association). Papers provide a broad overview of ongoing work in Germany, including high aspect ratio wings, low aspect ratio wings, bluff bodies, laminar flow control and transition, active flow control, hypersonic flows, aeroelasticity, aeroacoustics, mathematical fundamentals, numerical simulations, physical fundamentals, and facilities.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Engineering in Materials Processing II written by Andrzej Kot and published by Trans Tech Publications Ltd. This book was released on 2013-09-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). The special topic volume with invited papers covers works implementing the Control Theory to materials processing, especially the field of putting materials properties to its better use in manufacturing processes. Instead of only using principles of control theory for materials, researchers use phenomena arising in materials for control purposes. In this topic book most considerations are focused on the group of Smart Materials ie. Shape Memory Alloys (SMA) or Piezoelectrics.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1987 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Computing in Science and Engineering 09 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2010-04-28 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end of the year 2008, we have seen a strategic step towards a funct- ning HPC infrastructure on Tier-0 level in Germany. Based on an agreement (Verwaltungsabkommen") between the Federal Ministry of Education and " Research (BMBF) and the state ministries for research of Baden-Wurttem- · berg, Bayern, and Nordrhein-Westfalen, a budget of overall 400 Million Euro had been allocated - equally shared between federal and state authorities in a?ve year time frame - to establish the next generation of HPC systems at the Gauss Centre for Supercomputing (GCS) - consisting of the three nat- nal supercomputing centres HLRS (Stuttgart), NIC/JSC (Julich), and LRZ · (Munich). As part of that strategic initiative, in May 2009 already NIC/JSC has installed the?rst phase of the GCS HPC Tier-0 resources, an IBM Blue Gene/P with roughly 300. 000 Cores, this time in Julic · h, With that, the GCS provides the most powerfulhigh-performance computing infrastructure in - rope already today. HLRS and its partners in the GCS have agreed on a common strategy for the installation of the next generation of leading edge HPC systems. Over the next few years, HLRS and LRZ as the other two GCS centers will upgrade their systems accordingly. The plan is to have a Tier-0 HPC system within GCS operating at any time in this?ve year period. Asanintermediatestep, HLRShasreplacedmostoftheirNECSX-8nodes by the NEC SX-9/12M192, a system with roughly 20 TFLOPs peak
Download or read book Advances and Challenges in Flow Simulation and Modelling written by and published by . This book was released on 2005 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Verification and Validation in Scientific Computing written by William L. Oberkampf and published by Cambridge University Press. This book was released on 2010-10-14 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in scientific computing have made modelling and simulation an important part of the decision-making process in engineering, science, and public policy. This book provides a comprehensive and systematic development of the basic concepts, principles, and procedures for verification and validation of models and simulations. The emphasis is placed on models that are described by partial differential and integral equations and the simulations that result from their numerical solution. The methods described can be applied to a wide range of technical fields, from the physical sciences, engineering and technology and industry, through to environmental regulations and safety, product and plant safety, financial investing, and governmental regulations. This book will be genuinely welcomed by researchers, practitioners, and decision makers in a broad range of fields, who seek to improve the credibility and reliability of simulation results. It will also be appropriate either for university courses or for independent study.
