Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.
Download or read book Numerical Modeling of Masonry and Historical Structures written by Bahman Ghiassi and published by Woodhead Publishing. This book was released on 2019-06-15 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modeling of Masonry and Historical Structures: From Theory to Application provides detailed information on the theoretical background and practical guidelines for numerical modeling of unreinforced and reinforced (strengthened) masonry and historical structures. The book consists of four main sections, covering seismic vulnerability analysis of masonry and historical structures, numerical modeling of unreinforced masonry, numerical modeling of FRP-strengthened masonry, and numerical modeling of TRM-strengthened masonry. Each section reflects the theoretical background and current state-of-the art, providing practical guidelines for simulations and the use of input parameters. - Covers important issues relating to advanced methodologies for the seismic vulnerability assessment of masonry and historical structures - Focuses on modeling techniques used for the nonlinear analysis of unreinforced masonry and strengthened masonry structures - Follows a theory to practice approach
Download or read book Nonconventional and Vernacular Construction Materials written by Kent A. Harries and published by Woodhead Publishing. This book was released on 2019-11-18 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconventional and Vernacular Construction Materials: Characterisation, Properties and Applications, Second Edition covers the topic by taking into account sustainability, the conservation movement, and current interests in cultural identity and its preservation. This updated edition presents case studies, information on relevant codes and regulations, and how they apply (or do not apply) to nocmats. Leading international experts contribute chapters on current applications and the engineering of these construction materials. Sections review vernacular construction, provide future directions for nonconventional and vernacular materials research, focus on natural fibers, and cover the use of industrial byproducts and natural ashes in cement mortar and concrete. - Takes a scientifically rigorous approach to vernacular and non-conventional building materials and their applications - Includes a series of case studies and new material on codes and regulations, thus providing an invaluable compendium of practical knowhow - Presents the wider context of materials science and its applications in the sustainability agenda
Download or read book Masonry Structural Design written by Richard E. Klingner and published by McGraw Hill Professional. This book was released on 2010-02-08 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms
Download or read book Design of Reinforced Concrete Buildings for Seismic Performance written by Mark Aschheim and published by CRC Press. This book was released on 2019-04-05 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The costs of inadequate earthquake engineering are huge, especially for reinforced concrete buildings. This book presents the principles of earthquake-resistant structural engineering, and uses the latest tools and techniques to give practical design guidance to address single or multiple seismic performance levels. It presents an elegant, simple and theoretically coherent design framework. Required strength is determined on the basis of an estimated yield displacement and desired limits of system ductility and drift demands. A simple deterministic approach is presented along with its elaboration into a probabilistic treatment that allows for design to limit annual probabilities of failure. The design method allows the seismic force resisting system to be designed on the basis of elastic analysis results, while nonlinear analysis is used for performance verification. Detailing requirements of ACI 318 and Eurocode 8 are presented. Students will benefit from the coverage of seismology, structural dynamics, reinforced concrete, and capacity design approaches, which allows the book to be used as a foundation text in earthquake engineering.
Download or read book Mechanics of Masonry Structures written by Maurizio Angelillo and published by Springer Science & Business Media. This book was released on 2014-03-20 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experience of people working with different perspectives in different fields of masonry modeling, from mathematics to applied engineering and practice, is brought together in this book. It presents both the theoretical background and an overview of the state-of-the-art in static and dynamic masonry modeling.
Download or read book Strength Design of Masonry written by Richard Bennett and published by . This book was released on 2020-09-11 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: With dozens of design examples and design tips, coupled with excellent discussion, Strength Design of Masonry is a guide every practicing designer will want on their bookshelf to both learn from, and to reference. Topics addressed include an introduction to strength design concepts, background on structural masonry, general design, strength design procedures for beams, walls, columns, and shear walls, requirements for reinforcement and anchor bolts, and recommendations for construction. While the guide addresses unreinforced masonry, the primary focus is reinforced masonry designed to the 2016 edition of TMS 402/602 and the 2018 International Building Code. This Guide was developed to introduce strength design principles of masonry to designers unfamiliar with the method, while helping those more experienced use strength design easily and effectively.
Download or read book Simplified Design of Masonry Structures written by James Ambrose and published by John Wiley & Sons. This book was released on 1997-02-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete, accessible introduction to structural masonryfundamentals. This practical volume provides a thorough grounding in the designof masonry structures for buildings --with clear and easy-to-graspcoverage of basic materials, construction systems, building codes,industry standards, and simple computations for structural elementsof commonly used forms of masonry. Well-written and carefullyorganized, the book: * Includes all principal types of masonry materials: brick, stone,fired clay, concrete block, glass block, and more * Contains information on unreinforced, reinforced, and veneeredconstruction * Examines key design criteria: dead loads, live loads, lateralloads, structural planning, building code requirements, andperformance measurement * Features helpful study aids --including exercises and solutions,glossary of terms, bibliography, and detailed appendices. Requiring only minimal prior experience in engineering analysis ordesign, Simplified Design of Masonry Structures is ideal forself-study or classroom use. It is an essential reference forarchitecture and engineering students and professionals.
Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Brick and Block Masonry From Historical to Sustainable Masonry written by Jan Kubica and published by CRC Press. This book was released on 2020-07-06 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - From Historical to Sustainable Masonry contains the keynote and semi-keynote lectures and all accepted regular papers presented online during the 17th International Brick and Block Masonry Conference IB2MaC (Kraków, Poland, July 5-8, 2020). Masonry is one of the oldest structures, with more than 6,000 years of history. However, it is still one of the most popular and traditional building materials, showing new and more attractive features and uses. Modern masonry, based on new and modified traditional materials and solutions, offers a higher quality of life, energy savings and more sustainable development. Hence, masonry became a more environmentally friendly building structure. Brick and Block Masonry - From Historical to Sustainable Masonry focuses on historical, current and new ideas related to masonry development, and will provide a very good platform for sharing knowledge and experiences, and for learning about new materials and technologies related to masonry structures. The book will be a valuable compendium of knowledge for researchers, representatives of industry and building management, for curators and conservators of monuments, and for students.
Download or read book Computational Modeling of Masonry Structures Using the Discrete Element Method written by Sarhosis, Vasilis and published by IGI Global. This book was released on 2016-06-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Discrete Element Method (DEM) has emerged as a solution to predicting load capacities of masonry structures. As one of many numerical methods and computational solutions being applied to evaluate masonry structures, further research on DEM tools and methodologies is essential for further advancement. Computational Modeling of Masonry Structures Using the Discrete Element Method explores the latest digital solutions for the analysis and modeling of brick, stone, concrete, granite, limestone, and glass block structures. Focusing on critical research on mathematical and computational methods for masonry analysis, this publication is a pivotal reference source for scholars, engineers, consultants, and graduate-level engineering students.
Download or read book Handbook of Seismic Risk Analysis and Management of Civil Infrastructure Systems written by S Tesfamariam and published by Elsevier. This book was released on 2013-04-30 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes represent a major risk to buildings, bridges and other civil infrastructure systems, causing catastrophic loss to modern society. Handbook of seismic risk analysis and management of civil infrastructure systems reviews the state of the art in the seismic risk analysis and management of civil infrastructure systems.Part one reviews research in the quantification of uncertainties in ground motion and seismic hazard assessment. Part twi discusses methodologies in seismic risk analysis and management, whilst parts three and four cover the application of seismic risk assessment to buildings, bridges, pipelines and other civil infrastructure systems. Part five also discusses methods for quantifying dependency between different infrastructure systems. The final part of the book considers ways of assessing financial and other losses from earthquake damage as well as setting insurance rates.Handbook of seismic risk analysis and management of civil infrastructure systems is an invaluable guide for professionals requiring understanding of the impact of earthquakes on buildings and lifelines, and the seismic risk assessment and management of buildings, bridges and transportation. It also provides a comprehensive overview of seismic risk analysis for researchers and engineers within these fields. - This important handbook reviews the wealth of recent research in the area of seismic hazard analysis in modern earthquake design code provisions and practices - Examines research into the analysis of ground motion and seismic hazard assessment, seismic risk hazard methodologies - Addresses the assessment of seismic risks to buildings, bridges, water supply systems and other aspects of civil infrastructure
Download or read book Proceedings of XXIV AIMETA Conference 2019 written by Antonio Carcaterra and published by Springer Nature. This book was released on 2020-03-31 with total page 2200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the XXIV Conference of the Italian Association of Theoretical and Applied Mechanics, held in Rome, Italy, on September 15-19, 2019 (AIMETA 2019). The conference topics encompass all aspects of general, fluid, solid and structural mechanics, as well as mechanics for machines and mechanical systems, including theoretical, computational and experimental techniques and technological applications. As such the book represents an invaluable, up-to-the-minute tool, providing an essential overview of the most recent advances in the field.
Download or read book Rapid Visual Screening of Buildings for Potential Seismic Hazards Supporting Documentation written by and published by Government Printing Office. This book was released on 2015 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.
Download or read book Masonry Structural Design Second Edition written by Jennifer Eisenhauer Tanner and published by McGraw Hill Professional. This book was released on 2017-05-21 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly Updated Coverage of Masonry Codes, Materials, and Structural Design This fully revised resource covers the design of masonry structures using the 2015 International Building Code, the ASCE 7-10 loading standard, and the TMS 402-13 and TMS 602-13 design and construction standards. The book emphasizes the strength design of masonry and includes allowable-stress provisions. The latest advances, materials, and techniques are clearly explained. Chapter-long case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the topics presented. Masonry Structural Design, Second Edition, covers: • Structural behavior and design of low-rise, bearing wall buildings • Materials used in masonry construction • Code basis for structural design of masonry buildings • Basics of seismic design in masonry buildings • Introduction to MSJC treatment of structural design • Strength design of reinforced and unreinforced masonry elements • Allowable-stress design of reinforced and unreinforced masonry elements • Comparison of design by the allowable-stress approach versus the strength approach • Lateral load analysis of shear wall structure • Design and detailing of floor and roof diaphragms • Structural design of AAC masonry
Download or read book Masonry Structures written by Robert G. Drysdale and published by . This book was released on 1999 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Strengthening of Unreinforced Masonry Buildings written by Kit M. Wong and published by . This book was released on 1987 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
