Download or read book Unix Concepts And Applications written by Sumitabha Das and published by . This book was released on 2003 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Edition Incorporates Major Revisions, Moderate Additions, And Minor Deletions. It Focuses On The Two Major Versions Of Unix - Solaris And Linux. The Two-Part Structure Od The Previous Edition Has Been Maintained. The Fundamental Aspects Of The System Are Covered In Part I, Whereas The Intermediate And Advances Concepts Are Explained In Part Ii. Salient Features : Two New Chapters On Unix Systems Programming - The File And Process Control. Complete Chapter Devoted To Tcp/Ip Network Of Administration. Enhanced Coverage On Linux. Updated Coverage On The Internaet And The Http Protocol. End-Of-Chapter Questions Grouped Under Test Your Understanding With Answers In Appendix C And Flex Your Brain. Also Conforms To The Latest Revised Doeacca Level Syllabus Effective July 2003.
Download or read book Unix Concepts And Applications 4th Edition written by Sumitabha Das and published by . This book was released on 2006 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book UNIX System V Network Programming written by Stephen A. Rago and published by Pearson Education. This book was released on 1993 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Steve Rago offers valuable insights into the kernel-level features of SVR4 not covered elsewhere; I think readers will especially appreciate the coverage of STREAMS, TLI, and SLIP." - W. Richard Stevens, author of UNIX Network Programming, Advanced Programming in the UNIX Environment, TCP/IP Illustrated Volume 1, and TCP/IP Illustrated Volume 2 Finally, with UNIX(R) System V Network Programming, an authoritative reference is available for programmers and system architects interested in building networked and distributed applications for UNIX System V. Even if you currently use a different version of the UNIX system, such as the latest release of 4.3BSD or SunOS, this book is valuable to you because it is centered around UNIX System V Release 4, the version of the UNIX system that unified many of the divergent UNIX implementations. For those professionals new to networking and UNIX system programming, two introductory chapters are provided. The author then presents the programming interfaces most important to building communication software in System V, including STREAMS, the Transport Layer Interface library, Sockets, and Remote Procedure Calls. So that your designs are not limited to user-level, the author also explains how to write kernel-level communication software, including STREAMS drivers, modules, and multiplexors. Many examples are provided, including an Ethernet driver and a transport-level multiplexing driver. In the final chapter, the author brings the material from previous chapters together, presenting the design of a SLIP communication package. 0201563185B04062001
Download or read book Your UNIX written by Sumitabha Das and published by . This book was released on 2005-09-01 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used both as a pedagogical tool and a reference. This work is used for any introductory programming course that includes Unix and for advanced courses such as those on Operating Systems and System Administration. It contains over 900 exercises and self-test questions. This book also features coverage of Linux, where Linux differs from UNIX.
Download or read book Linux System Programming written by Robert Love and published by "O'Reilly Media, Inc.". This book was released on 2013-05-14 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Write software that draws directly on services offered by the Linux kernel and core system libraries. With this comprehensive book, Linux kernel contributor Robert Love provides you with a tutorial on Linux system programming, a reference manual on Linux system calls, and an insider’s guide to writing smarter, faster code. Love clearly distinguishes between POSIX standard functions and special services offered only by Linux. With a new chapter on multithreading, this updated and expanded edition provides an in-depth look at Linux from both a theoretical and applied perspective over a wide range of programming topics, including: A Linux kernel, C library, and C compiler overview Basic I/O operations, such as reading from and writing to files Advanced I/O interfaces, memory mappings, and optimization techniques The family of system calls for basic process management Advanced process management, including real-time processes Thread concepts, multithreaded programming, and Pthreads File and directory management Interfaces for allocating memory and optimizing memory access Basic and advanced signal interfaces, and their role on the system Clock management, including POSIX clocks and high-resolution timers
Download or read book UNIX Systems Programming for SVR4 written by David Allan Curry and published by O'Reilly Media. This book was released on 1996 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the nitty gritty details on how UNIX interacts with applications. Inlcudes many extended examples on topics ranging from string manipulation to network programming
Download or read book Linux with Operating System Concepts written by Richard Fox and published by CRC Press. This book was released on 2021-12-29 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: A True Textbook for an Introductory Course, System Administration Course, or a Combination Course Linux with Operating System Concepts, Second Edition merges conceptual operating system (OS) and Unix/Linux topics into one cohesive textbook for undergraduate students. The book can be used for a one- or two-semester course on Linux or Unix. It is complete with review sections, problems, definitions, concepts and relevant introductory material, such as binary and Boolean logic, OS kernels and the role of the CPU and memory hierarchy. Details for Introductory and Advanced Users The book covers Linux from both the user and system administrator positions. From a user perspective, it emphasizes command-line interaction. From a system administrator perspective, the text reinforces shell scripting with examples of administration scripts that support the automation of administrator tasks. Thorough Coverage of Concepts and Linux Commands The author incorporates OS concepts not found in most Linux/Unix textbooks, including kernels, file systems, storage devices, virtual memory and process management. He also introduces computer science topics, such as computer networks and TCP/IP, interpreters versus compilers, file compression, file system integrity through backups, RAID and encryption technologies, booting and the GNUs C compiler. New in this Edition The book has been updated to systemd Linux and the newer services like Cockpit, NetworkManager, firewalld and journald. This edition explores Linux beyond CentOS/Red Hat by adding detail on Debian distributions. Content across most topics has been updated and improved.
Download or read book The Art of UNIX Programming written by Eric S. Raymond and published by Addison-Wesley Professional. This book was released on 2003-09-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art of UNIX Programming poses the belief that understanding the unwritten UNIX engineering tradition and mastering its design patterns will help programmers of all stripes to become better programmers. This book attempts to capture the engineering wisdom and design philosophy of the UNIX, Linux, and Open Source software development community as it has evolved over the past three decades, and as it is applied today by the most experienced programmers. Eric Raymond offers the next generation of "hackers" the unique opportunity to learn the connection between UNIX philosophy and practice through careful case studies of the very best UNIX/Linux programs.
Download or read book Linux and the Unix Philosophy written by Mike Gancarz and published by Elsevier. This book was released on 2003-08-15 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike so many books that focus on how to use Linux, Linux and the Unix Philosophy explores the "way of thinking that is Linux" and why Linux is a superior implementation of this highly capable operating system.This book is a revision and expansion of a computer science classic. Every chapter has been thoroughly updated with Linux coverage.Linux and the Unix Philosophy falls squarely between the "softer" texts on iterative software design and project management and the "how-to" technical texts. Thus far, no one has come out with a book that addresses this topic, either in the Unix space or the Linux space. Linux and the Unix Philosophy covers the same ground as the first edition, while it also presents bold new ideas about Linux and Open Source.·Concise list of philosophy tenets makes it a handy quick reference·Anecdotal examples personalize the book for the reader·Conversational style makes it easy and joyful to read
Download or read book Beginning Linux Programming written by Neil Matthew and published by John Wiley & Sons. This book was released on 2004-01-02 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book starts with the basics, explaining how to compile and run your first program. First, each concept is explained to give you a solid understanding of the material. Practical examples are then presented, so you see how to apply the knowledge in real applications.
Download or read book UNIX Systems Programming written by Kay A. Robbins and published by Prentice Hall Professional. This book was released on 2003 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: bull; Learn UNIX essentials with a concentration on communication, concurrency, and multithreading techniques bull; Full of ideas on how to design and implement good software along with unique projects throughout bull; Excellent companion to Stevens' Advanced UNIX System Programming
Download or read book Practical Systems Programming with C written by Sri Manikanta Palakollu and published by Apress. This book was released on 2021-03-14 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches systems programming with the latest versions of C through a set of practical examples and problems. It covers the development of a handful of programs, implementing efficient coding examples. Practical Systems Programming with C contains three main parts: getting your hands dirty with C programming; practical systems programming using concepts such as processes, signals, and inter-process communication; and advanced socket-based programming which consists of developing a network application for reliable communication. You will be introduced to a marvelous ecosystem of systems programming with C, from handling basic system utility commands to communicating through socket programming. With the help of socket programming you will be able to build client-server applications in no time. The “secret sauce” of this book is its curated list of topics and solutions, which fit together through a set of different pragmatic examples; each topic is covered from scratch in an easy-to-learn way. On that journey, you’ll focus on practical implementations and an outline of best practices and potential pitfalls. The book also includes a bonus chapter with a list of advanced topics and directions to grow your skills. What You Will Learn Program with operating systems using the latest version of C Work with Linux Carry out multithreading with C Examine the POSIX standard Work with files, directories, processes, and signals Explore IPC and how to work with it Who This Book Is For Programmers who have an exposure to C programming and want to learn systems programming. This book will help them to learn about core concepts of operating systems with the help of C programming. .
Download or read book UNIX Unleashed written by Robin Burk and published by Sams Publishing. This book was released on 1997 with total page 1400 pages. Available in PDF, EPUB and Kindle. Book excerpt: "UNIX Unleashed, 2nd Ed". takes an in-depth look at UNIX and its features, commands, and utilities. Written by UNIX experts in the UNIX and open systems fields, this book is the all-purpose, one-stop UNIX guide that takes the reader from start to finish. The companion CD contains GNU Emacs, Perl BASH, UUCP, TeX utilities, GNU C++ Compiler, and shell scripts from the book, as well as other programs and utilities.
Download or read book UNIX and Shell Programming written by Behrouz A. Forouzan and published by Cengage Learning. This book was released on 2003 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as one of the first true textbooks on how to use the UNIX operating system and suitable for a wide variety of UNIX-based courses, UNIX and Shell Programming goes beyond providing a reference of commands to offer a guide to basic commands and shell programming. Forouzan/Gilberg begin by introducing students to basic commands and tools of the powerful UNIX operating system. The authors then present simple scriptwriting concepts, and cover all material required for understanding shells (e.g., Regular Expressions, grep, sed, and awk) before introducing material on the Korn, C, and Bourne shells. Throughout, in-text learning aids encourage active learning and rich visuals support concept presentation. For example, sessions use color so students can easily distinguish user input from computer output. In addition, illustrative figures help student visualize what the command is doing. Each chapter concludes with problems, including lab sessions where students work on the computer and complete sessions step-by-step. This approach has proven to be successful when teaching this material in the classroom.
Download or read book UNIX The Complete Reference Second Edition written by Kenneth Rosen and published by McGraw Hill Professional. This book was released on 2006-12-19 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive UNIX Resource--Fully Updated Get cutting-edge coverage of the newest releases of UNIX--including Solaris 10, all Linux distributions, HP-UX, AIX, and FreeBSD--from this thoroughly revised, one-stop resource for users at all experience levels. Written by UNIX experts with many years of experience starting with Bell Laboratories, UNIX: The Complete Reference, Second Edition provides step-by-step instructions on how to use UNIX and take advantage of its powerful tools and utilities. Get up-and-running on UNIX quickly, use the command shell and desktop, and access the Internet and e-mail. You'll also learn to administer systems and networks, develop applications, and secure your UNIX environment. Up-to-date chapters on UNIX desktops, Samba, Python, Java Apache, and UNIX Web development are included. Install, configure, and maintain UNIX on your PC or workstation Work with files, directories, commands, and the UNIX shell Create and modify text files using powerful text editors Use UNIX desktops, including GNOME, CDE, and KDE, as an end user or system administrator Use and manage e-mail, TCP/IP networking, and Internet services Protect and maintain the security of your UNIX system and network Share devices, printers, and files between Windows and UNIX systems Use powerful UNIX tools, including awk, sed, and grep Develop your own shell, Python, and Perl scripts, and Java, C, and C++ programs under UNIX Set up Apache Web servers and develop browser-independent Web sites and applications
Download or read book Advanced Programming in the UNIX Environment written by W. Richard Stevens and published by Addison-Wesley Professional. This book was released on 2008-01-01 with total page 927 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of the definitive guide to Unix system programming is now available in a more portable format.
Download or read book Operating Systems written by Thomas Anderson and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, there has been a huge amount of innovation in both the principles and practice of operating systems Over the same period, the core ideas in a modern operating system - protection, concurrency, virtualization, resource allocation, and reliable storage - have become widely applied throughout computer science. Whether you get a job at Facebook, Google, Microsoft, or any other leading-edge technology company, it is impossible to build resilient, secure, and flexible computer systems without the ability to apply operating systems concepts in a variety of settings. This book examines the both the principles and practice of modern operating systems, taking important, high-level concepts all the way down to the level of working code. Because operating systems concepts are among the most difficult in computer science, this top to bottom approach is the only way to really understand and master this important material.
