Download or read book Metals Abstracts written by and published by . This book was released on 1986 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Recovery Remediation of Metals written by Drummond Earley III and published by Society for Mining, Metallurgy & Exploration. This book was released on 2020-03-27 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current trends in mining are driving the demand for subsurface extraction technologies with low surface impacts that protect surface and ground water. Moreover, the necessity for sustainable mineral extraction technologies has increased as regulatory restrictions and technical challenges to traditional mining grow with production from deeper and deeper remaining metal resources. This book provides a state-of-the-art synopsis of in situ metal recovery and remediation technologies based on both research and commercial projects. In situ recovery uses fluid-based metal dissolution and recovery to extract one or more commodities from a largely intact rock mass using similar processes that create ore deposits. The fluid is circulated through ore by gravity and/or pumps using injection and recovery wells. A processing facility is usually established at the surface of the operation to extract the commodity of interest. The barren fluid is then recirculated back into the recovery circuit. In situ remediation uses similar wellfield technology and chemical processes to stabilize metal contaminants by injecting agents that form stable solids or less toxic species when combined with a contaminant. The fluid depleted in the stabilizing agent is then pumped back to the surface and regenerated. In situ mining or recovery has been successfully applied to several commodities, including uranium, sulfur, evaporites, and copper, which have favorable chemical properties and deposit types for in situ recovery.
Download or read book Recovery and Refining of Precious Metals written by C.W. Ammen and published by Springer. This book was released on 2014-05-14 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the product of forty years of hands-on physiochemical work with both ferrous and nonferrous metals and with the metallurgy of refining. extracting. and casting. Its purpose is to cover the various methods of recovery and refining of precious metals. Both primary sources-placer gold. black sand. and ores-and secondary sources scrap jewelry. electronic scrap. old films. buffings. spent plating and stripping solutions. catalytic automobile converters. and old eyeglass frames-are covered. The information contained in this volume is very basic and is intended for hands-on application and use. It is for nonchemist and chemist alike. I will not discuss the mathematical formulas for the various chemical reactions that take place-I leave them to the reader who wants to increase his working knowledge and understanding of chem istry. There are many courses offered in chemistry and extractive metallurgy. as well as a number of books available for self-study. The purpose of this book is to teach you how to perform various extractive. refining. and testing operations on precious metals (in various forms and states). with a resulting end product. You will learn how to perform operations in assaying and extraction. qualitative analysis. quantitative analysis. testing. classifying. and con centration-some of a purely mechanical nature. some of a chemical nature. Oualitative analysis involves the identification of an unknown material. To do this. you must have a plan of testing or attack. For example.
Download or read book Gold written by Nathaniel Arbiter and published by CRC Press. This book was released on 1990 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The eight articles first appeared as volume 6 (no date) of Mineral processing and extractive metallurgy review. They review new methods of recovery for gold, and to some extent, silver, focus on the particular challenges of extraction from carbonaceous ores and from various sulfide-bearing ore, and the treatment of refractory gold ore, and discuss high-temperature and biological oxidation, high- temperature chlorination, and removing metals from leach liquor. Book club price, $40. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Mineral Processing written by Jyothi Rajesh Kumar and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal usage by humans is vigorously increasing day-by-day. Since the turn of the new millennium, human needs have mainly depended on different types of metal. Ores and minerals are the primary natural sources of metals. In order to process metals, manufacturers require certain methods and technology. This reference book provides six widely used varieties of metal synthesizing and the chapters are contributed by internationally reputed professors and researchers. Chapter One focuses on biomineralization. Biomineralisation is an art of nature; it is an important process where organisms produce hierarchical mineral structures with diverse functions for their survival. This process happens through the self-organisation of organic and inorganic molecules under ambient conditions, resulting in highly structured materials with remarkable physical and chemical properties. Chapter Two refers to the application of biological methods in mineral processing. Chapter Three describes monazite mineral processing; monazite is the main resource of rare earth metals such as uranium and thorium. In this chapter, monazite mining, beneficiation and metallurgical routes are discussed. Chapter Four defines the hydrometallurgy of rare earth metals, including scandium. Chapter Five deals with ore extraction technology through computer aided engineering techniques. The final chapter concludes with the processing technology used to treat primary and secondary sources for base metal recovery.
Download or read book The Recovery Of Gold From Secondary Sources written by Syed Sabir and published by World Scientific. This book was released on 2016-06-29 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: New discoveries of the properties of gold at a nanoscale, and its effective use in modern technologies, have been driving a virtual 'gold rush'. Depleting natural resources has meant that the recovery of gold continues to grow in importance and relevance.The Recovery of Gold from Secondary Sources analyses the most advanced technology in gold recovery and recycling from spent sources of mobile phones, unwanted electronic equipment and waste materials. State-of-the-art techniques of hydrometallurgical and bio-metallurgical processing, leaching, cementing, adsorbing and separation through bio-sorbents are all described in detail, providing a guide for students and researchers. Discussion of environmentally friendly methods of recovery are presented, in order to provide modern-day alternatives to previous techniques. For those interested in the study of gold recovery this book gives a comprehensive overview of current recovery, making it the ultimate source of information for students, researchers, chemists, metallurgists, environmental scientists and electronic waste recovery experts.
Download or read book Leaching Gold silver Ores with Sodium Cyanide and Thiourea Under Comparable Conditions written by Judith A. Eisele and published by . This book was released on 1988 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Roasting of Gold and Silver Ores written by G. Kustel and published by . This book was released on 2012-02-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold and Silver occur natively here and there but much more commonly they occur with Sulfides and Tellurides. In order to separate the Gold and Silver from say a sulfide ore one of the methods used is known as Roasting. The process involves heating up the ores with certain salts in order to burn off the sulfides allowing you to recover the precious metals. There are many different charges and salts you may need to use depending on whether the ore is a Gold Telluride, A Gold-Silver Telluride, or a Copper-Silver Sulfide etc. This book discusses the different temperatures and mixtures that you need based on the type of ore you roasting. These methods are still used today in a lot of process plants. Once the ore is roasted the Gold and Silver can be recovered more easily by leaching and precipitation or by gravity methods which are all discussed in this book. Long out of print this book is now available again from Miningbooks.com.
Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Elsevier. This book was released on 2011-04-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology provides practising engineers and students of mineral processing, metallurgy and mining with a review of all of the common ore-processing techniques utilized in modern processing installations. Now in its Seventh Edition, this renowned book is a standard reference for the mineral processing industry. Chapters deal with each of the major processing techniques, and coverage includes the latest technical developments in the processing of increasingly complex refractory ores, new equipment and process routes. This new edition has been prepared by the prestigious J K Minerals Research Centre of Australia, which contributes its world-class expertise and ensures that this will continue to be the book of choice for professionals and students in this field.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. The work is fully indexed and referenced. - The classic mineral processing text, revised and updated by a prestigious new team - Provides a clear exposition of the principles and practice of mineral processing, with examples taken from practice - Covers the latest technological developments and highlights the challenges facing the mineral processor - New sections on environmental problems, improving the efficiency of existing processes and dealing with waste.
Download or read book The Cyanide Process of Gold Extraction a Text Book for the Use of Metallurgists and Students at Schools of Mines Etc written by James Park and published by Theclassics.Us. This book was released on 2013-09 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1897 edition. Excerpt: ... CHAPTER TIL LABORATORY EXPERIMENTS. The cyanide process is essentially a chemical one, and a commodious and well-equipped laboratory forms one of the most important and necessary parts of the whole plant. It is the duty of the metallurgist in charge to determine by actual experiment the lowest strength of cyanide solution to extract an adequate percentage of the gold, and also to devise means of overcoming the problems which are inseparable from the treatment of different classes and grades of ore, with so active and subtle a compound as potassium cyanide. The testing and valuing of the ores before, during, and after treatment must be entrusted to a careful and trustworthy assayer. The testing and making up of the working solutions are very simple operations, that may be left to experienced and intelligent workmen who possess a knowledge of arithmetic extending as far as decimals. With free-milling gold ores the actual working extraction will generally be as high as that obtained in the laboratory, but too much reliance must not be placed on the laboratory experiments in the case of ores containing copper or antimony. The author, s experience is that high extractions may be obtained in the laboratory from ores totally unsuited for treatment by the cyanide process on a working scale. The conditions on the one hand are theoretical, on the other actual, and before adopting the cyanide treatment for a sulphide or mineralized ore, working experiments should be made on parcels ranging from two to five tons, in order to ascei-tain the consumption of cyanide and actual extraction. If the working trials are successful the cyanide treatment may be adopted with confidence. On the other hand, in the case of an ore containing comparatively coarse..
Download or read book Recovering Precious Metals written by George E. Gee and published by Watchmaker Publishing. This book was released on 2002-10-28 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Recovery and Remediation of Metals written by DRUMMOND EARLEY III. and published by . This book was released on 2020 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art synopsis of in situ metal recovery and remediation technologies based on both research and commercial projects. In situ recovery uses fluid-based metal dissolution and recovery to extract one or more commodities from a largely intact rock mass using similar processes that create ore deposits.
Download or read book Roasting of Gold and Silver Ores and the Extraction of Their Respective Metals Without Quicksilver Classic Reprint written by G. Kustel and published by Forgotten Books. This book was released on 2019-01-03 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Roasting of Gold and Silver Ores and the Extraction of Their Respective Metals Without Quicksilver The Solving Process is very simple, and readily performed by common workmen; besides the lime, only brimstone must be provided, in order to prepare the necessary chem icals for solving and precipitation. It is a general but erroneous belief, that the solving is a slow process. An amalgamating pan is charged with 500 to pounds of roasted ore, and treated at least six hours, and therefore turns out at most two tons in 24 hours while a box or vat of proper size used in the Solving Process, can work from four to five tons in the same time. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Recovering Precious Metals from Waste Liquid Residues Classic Reprint written by George Edward Gee and published by Forgotten Books. This book was released on 2017-10-21 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Recovering Precious Metals From Waste Liquid Residues The quantity of soluble gold, silver, and platinum that exists in some of the waste liquids resulting from the manufacture of jewellery, Silver plate, and personal ornament is considerable, and as these metals are of high value, it is of paramount import ance that all operations in which they are used in the industrial arts Should be conducted with great care, as regards unnecessary wastage resulting from the different modes of treatment, and that all the waste products be strictly preserved and correctly treated at intervals for the extraction of the precious metals. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Roasting of Gold and Silver Ores and the Extraction of Their Respective Metals Without Quicksilver written by Guido Kustel and published by . This book was released on 2008-06 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This scarce antiquarian book is a facsimile reprint of the original. Due to its age, it may contain imperfections such as marks, notations, marginalia and flawed pages. Because we believe this work is culturally important, we have made it available as part of our commitment for protecting, preserving, and promoting the world's literature in affordable, high quality, modern editions that are true to the original work.
Download or read book Rare Metal Extraction by Chemical Engineering Techniques written by W. D. Jamrack and published by Elsevier. This book was released on 2014-07-15 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare Metal Extraction by Chemical Engineering Techniques describes the use of chemical engineering techniques in the extraction and purification of rare metals such as uranium, thorium, and zirconium as well as hafnium, titanium, beryllium, and vanadium. The various chemical extraction stages from ore to metal are discussed. Comprised of nine chapters, this book begins with an examination of ore breakdown processes including dilute acid leaching and the breakdown of concentrated acids, alkalis, and fluorides as well as chlorination. The reader is then introduced to ion-exchange purification; solvent extraction; and dryway conversion processes. Subsequent chapters focus on metal production by high-temperature reduction techniques; molten salt electrolytic processes; and iodide decomposition processes. The final chapter includes a selection of complete flowsheets for the extraction and purification rare metals from ores. This monograph will be of value to metallurgists, chemical engineers, chemists, and others who are interested in the extraction of rare metals.
Download or read book Mineral Processing Technology written by Barry Alan Wills and published by Pergamon. This book was released on 1985 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
