Download or read book Unified Fracture Design written by Michael J. Economides and published by . This book was released on 2002 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Incorporating Rigorous Height Determination Into Unified Fracture Design written by Termpan Pitakbunkate and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing plays an important role in increasing production rate in tight reservoirs. The performance of the reservoir after fracturing can be observed from the productivity index. This parameter is dependent on the fracture geometry; height, length and width. Unified fracture design (UFD) offers a method to determine the fracture dimensions providing the maximum productivity index for a specific proppant amount. Then, in order to achieve the maximum productivity index, the treatment schedules including the amount of liquid and proppant used for each stage must be determined according to the fracture dimensions obtained from the UFD. The proppant number is necessary for determining the fracture geometry using the UFD. This number is used to find the maximum productivity index for a given proppant amount. Then, the dimensionless fracture conductivity index corresponding to the maximum productivity index can be computed. The penetration ration, the fracture length, and the propped fracture width can be computed from the dimensionless fracture conductivity. However, calculating the proppant number used in UFD requires the fracture height as an input. The most convenient way to estimate fracture height to input to the UFD is to assume that the fracture height is restricted by stress contrast between the pay zone and over and under-lying layers. In other words, the fracture height is assumed to be constant, independent of net pressure and equal to the thickness of the layer which has the least minimum principal stress. However, in reality, the fracture may grow out from the target formation and the height of fracture is dependent on the net pressure during the treatment. Therefore, it is necessary to couple determination of the fracture height with determination of the other fracture parameters. In this research, equilibrium height theory is applied to rigorously determine the height of fracture. Solving the problem iteratively, it is possible to incorporate the rigorous fracture height determination into the unified fracture design.
Download or read book Physical Optimization of Acid Fracturing with Unified Fracture Design written by Arjun Ravikumar and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Acid fracturing is a reservoir stimulation technique where a fracture is created by injection of acid into the reservoir instead of conventional proppant slurry. The acid causes differential etching on the fracture walls, creating asperities. These asperities hold up the fracture wall, thus contributing to fracture conductivity. Acid fracturing is used mainly to stimulate carbonate rock. This technique has certain advantages over conventional fracturing. There is no proppant used, therefore the risk of screenout is nullified. There are also logistic reasons such as transport of proppant, which might make acid fracturing a viable choice. Theoretically, acid fractures have infinite conductivity in these conduits. This is not always true in practice. In this work, a physical optimization of acid fracturing is performed by utilizing the Unified Fracture Design methodology (UFD, hereforth). Parametric studies are performed to study the dependency of productivity on various factors.
Download or read book Optimization of Hydraulic Fracture Stages and Sequencing in Unconventional Formations written by Ahmed Alzahabi and published by CRC Press. This book was released on 2018-07-03 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale gas and/or oil play identification is subject to many screening processes for characteristics such as porosity, permeability, and brittleness. Evaluating shale gas and/or oil reservoirs and identifying potential sweet spots (portions of the reservoir rock that have high-quality kerogen content and brittle rock) requires taking into consideration multiple rock, reservoir, and geological parameters that govern production. The early determination of sweet spots for well site selection and fracturing in shale reservoirs is a challenge for many operators. With this limitation in mind, Optimization of Hydraulic Fracture Stages and Sequencing in Unconventional Formations develops an approach to improve the industry’s ability to evaluate shale gas and oil plays and is structured to lead the reader from general shale oil and gas characteristics to detailed sweet-spot classifications. The approach uses a new candidate selection and evaluation algorithm and screening criteria based on key geomechanical, petrophysical, and geochemical parameters and indices to obtain results consistent with existing shale plays and gain insights on the best development strategies going forward. The work introduces new criteria that accurately guide the development process in unconventional reservoirs in addition to reducing uncertainty and cost.
Download or read book A Unified Statistical Methodology for Modeling Fatigue Damage written by Enrique Castillo and published by Springer Science & Business Media. This book was released on 2009-02-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a uni?ed methodology to derive models for fatigue life. This includes S-N, ?-N and crack propagation models. This is not a conventional book aimed at describing the fatigue fundamentals, but rather a book in which the basic models of the three main fatigue approaches, the stress-based, the strain-based and the fracture mechanics approaches, are contemplated from a novel and integrated point of view. On the other hand, as an alternative to the preferential attention paid to deterministic models based on the physical, phenomenological and empirical description of fatigue, their probabilistic nature is emphasized in this book, in which stochastic fatigue and crack growth models are presented. This book is the result of a long period of close collaborationbetween its two authors who, although of di?erent backgrounds, mathematical and mechanical, both have a strong sense of engineering with respect to the fatigue problem. When the authors of this book ?rst approached the fatigue ?eld in 1982 (twenty six years ago), they found the following scenario: 1. Linear, bilinear or trilinear models were frequently proposed by relevant laboratoriesandacademiccenterstoreproducetheW ̈ ohler?eld. Thiswas the case of well known institutions, which justi?ed these models based on clientrequirementsorpreferences. Thisledtotheinclusionofsuchmodels and methods as, for example, the up-and-down, in standards and o?cial practical directives (ASTM, Euronorm, etc.), which have proved to be unfortunate.
Download or read book Methodologies and New User Interfaces to Optimize Hydraulic Fracturing Design and Evaluate Fracturing Performance for Gas Wells written by Wenxin Wang and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents and develops efficient and effective methodologies for optimal hydraulic fracture design and fracture performance evaluation. These methods incorporate algorithms that simultaneously optimize all of the treatment parameters while accounting for required constraints. Damage effects, such as closure stress, gel damage and non-Darcy flow, are also considered in the optimal design and evaluation algorithms. Two user-friendly program modules, which are active server page (ASP) based, were developed to implement the utility of the methodologies. Case analysis was executed to demonstrate the workflow of the two modules. Finally, to validate the results from the two modules, results were compared to those from a 3D simulation program. The main contributions of this work are: An optimal fracture design methodology called unified fracture design (UFD)is presented and damage effects are considered in the optimal design calculation. As a by-product of UFD, a fracture evaluation methodology is proposed to conduct well stimulation performance evaluation. The approach is based on calculating and comparing the actual dimensionless productivity index of fractured wells with the benchmark which has been developed for optimized production. To implement the fracture design and evaluation methods, two web ASP based user interfaces were developed; one is called Frac Design (Screening), and the other is Frac Evaluation. Both modules are built to hold the following features. Friendly web ASP based user interface Minimum user inputo Proppant type and mesh size selection- Damage effects consideration options- Convenient on-line help.
Download or read book Unconventional Oil and Gas Resources Handbook written by Y Zee Ma and published by Gulf Professional Publishing. This book was released on 2015-10-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional Oil and Gas Resources Handbook: Evaluation and Development is a must-have, helpful handbook that brings a wealth of information to engineers and geoscientists. Bridging between subsurface and production, the handbook provides engineers and geoscientists with effective methodology to better define resources and reservoirs. Better reservoir knowledge and innovative technologies are making unconventional resources economically possible, and multidisciplinary approaches in evaluating these resources are critical to successful development. Unconventional Oil and Gas Resources Handbook takes this approach, covering a wide range of topics for developing these resources including exploration, evaluation, drilling, completion, and production. Topics include theory, methodology, and case histories and will help to improve the understanding,integrated evaluation, and effective development of unconventional resources. Presents methods for a full development cycle of unconventional resources, from exploration through production Explores multidisciplinary integrations for evaluation and development of unconventional resources and covers a broad range of reservoir characterization methods and development scenarios Delivers balanced information with multiple contributors from both academia and industry Provides case histories involving geological analysis, geomechanical analysis, reservoir modeling, hydraulic fracturing treatment, microseismic monitoring, well performance and refracturing for development of unconventional reservoirs
Download or read book CIGOS 2019 Innovation for Sustainable Infrastructure written by Cuong Ha-Minh and published by Springer Nature. This book was released on 2019-10-10 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles from the 5th International Conference on Geotechnics, Civil Engineering Works and Structures, held in Ha Noi, focusing on the theme “Innovation for Sustainable Infrastructure”, aiming to not only raise awareness of the vital importance of sustainability in infrastructure development but to also highlight the essential roles of innovation and technology in planning and building sustainable infrastructure. It provides an international platform for researchers, practitioners, policymakers and entrepreneurs to present their recent advances and to exchange knowledge and experience on various topics related to the theme of “Innovation for Sustainable Infrastructure”.
Download or read book Unified Constitutive Laws of Plastic Deformation written by A. S. Krausz and published by Elsevier. This book was released on 1996-05-31 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-technology industries using plastic deformation demand soundly-based economical decisions in manufacturing design and product testing, and the unified constitutive laws of plastic deformation give researchers aguideline to use in making these decisions. This book provides extensive guidance in low cost manufacturing without the loss of product quality. Each highly detailed chapter of Unified Constitutive Laws of Plastic Deformation focuses on a distinct set of defining equations. Topics covered include anisotropic and viscoplastic flow, and the overall kinetics and thermodynamics of deformation. This important book deals with a prime topic in materials science and engineering, and will be of great use toboth researchers and graduate students. Describes the theory and applications of the constitutive law of plastic deformation for materials testing Examines the constitutive law of plastic deformation as it applies to process and product design Includes a program on disk for the determination and development of the constitutive law of plastic deformation Considers economical design and testing methods
Download or read book Fine Reservoir Description written by Huanqing Chen and published by Elsevier. This book was released on 2022-07-14 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fine Reservoir Description: Techniques, Current Status, Challenges and Solutions presents studies on fine oil and gas reservoirs, covering aspects of current status and progress, content and methods/techniques, as well as challenges and solutions through literature review and case studies of reservoirs, including volcanic rocks in the Songliao Basin, glutenite at the northwestern margin of the Junggar Basin, and sandstone in the Liaohe Basin, China. This book contains a large amount of data and illustrations. Provides a comprehensive overview of the latest advances in refined reservoir characterization for three types of reservoirs: high water cut, low permeability, and complex lithology Includes methods and techniques of fine reservoir description that are elaborated from nine aspects, such as fine stratigraphic division and correlation, fracture characterization and fine characterization of sand body Presents eight easy to use measures that are proposed to solve the problems of fine reservoir description
Download or read book New Directions on Model Predictive Control written by Jinfeng Liu and published by MDPI. This book was released on 2019-01-16 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "New Directions on Model Predictive Control" that was published in Mathematics
Download or read book A Unified Technology Plan for Fatigue and Fracture Design written by Herbert F. Hardrath and published by . This book was released on 1973 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Continuum Damage Mechanics to Fatigue and Fracture written by David L. McDowell and published by ASTM International. This book was released on 1997 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from the May 1996 Symposium on Applications of Continuum Damage Mechanics (CDM) to Fatigue and Fracture. Papers in Section I deal with various aspects of modeling damage in composite materials, such as high temperature environmental degradation, fatigue, and viscous damage in metal a
Download or read book Advanced Natural Gas Engineering written by Xiuli Wang and published by Elsevier. This book was released on 2013-11-25 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas is playing an increasing role in meeting world energy demands because of its abundance, versatility, and its clean burning nature. As a result, lots of new gas exploration, field development and production activities are under way, especially in places where natural gas until recently was labeled as “stranded . Because a significant portion of natural gas reserves worldwide are located across bodies of water, gas transportation in the form of LNG or CNG becomes an issue as well. Finally natural gas is viewed in comparison to the recently touted alternatives. Therefore, there is a need to have a book covering all the unique aspects and challenges related to natural gas from the upstream to midstream and downstream. All these new issues have not been addressed in depth in any existing book. To bridge the gap, Xiuli Wang and Michael Economides have written a new book called Advanced Natural Gas Engineering. This book will serve as a reference for all engineers and professionals in the energy business. It can also be a textbook for students in petroleum and chemical engineering curricula and in training departments for a large group of companies.
Download or read book Non Darcy Flow and Multi Phase Flow written by Nasraldin Alarbi and published by LAP Lambert Academic Publishing. This book was released on 2011-12 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing has recently been the completion of choice for most tight gas formations. It has proven successful to produce these formations in a commercial manner. However, some considerations have to be taken into account when designing a fracture treatment. These considerations include, but not limited to, non-Darcy flow and multiphase flow effects inside the fracture. These effects reduce the fracture conductivity significantly. Failing to account for that results in overestimating the deliverability of the wells and, consequently, to designing a fracture treatment that is not optimum. In this book a thorough investigation of non-Darcy flow and multi-phase flow effects on the productivity of hydraulically fractured gas wells is conducted and an optimum fracture design is proposed for a tight gas formation in south Texas using the Unified Fracture Design (UFD) Technique to compensate for the mentioned effects by calculating the effective fracture permeability in an iterative way. A comparison between the UFD and the most well known 3D fracture simulators is also carried out to point out the differences as far as the methodology and design considerations.
Download or read book Applied Physics System Science and Computers written by Klimis Ntalianis and published by Springer. This book was released on 2017-07-20 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on advanced theories and methods in three related fields of research: applied physics, system science and computers. It is organized in two main parts, the first of which covers applied physics topics, including lasers and accelerators; condensed matter, soft matter and materials science; nanoscience and quantum engineering; atomic, molecular, optical and plasma physics; as well as nuclear and high-energy particle physics. It also addresses astrophysics, gravitation, earth and environmental science, as well as medical and biological physics. The second part focuses on advances in system science and computers, exploring automatic circuit control, power systems, computer communication, fluid mechanics, simulation and modeling, software engineering, data structures and applications of artificial intelligence among other areas. Offering a collection of contributions presented at the 1st International Conference on Applied Physics, System Science and Computers (APSAC 2016), the book bridges the gap between applied physics and electrical engineering. It not only to presents new methods, but also promotes collaborations between different communities working on related topics at the interface between physics and engineering, with a special focus on communication, data modeling and visualization, quantum information, applied mechanics as well as bio and geophysics.
Download or read book Review of Hydraulic Fracturing Technology and Practices written by United States. Congress. House. Committee on Science, Space, and Technology (2011) and published by . This book was released on 2011 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
