Download or read book Understanding Your Risks Identifying Hazards and Estimating Losses State and Local Mitigation Planning How To Guide FEMA 386 2 August 2001 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Emergency Management Agency (FEMA) has developed this series of mitigation planning "how-to" guides to assist states, communities, and tribes in enhancing their natural hazard mitigation planning capabilities. These guides are designed to provide the type of information states and communities need to initiate and maintain a planning process that will result in safer communities. These guides are applicable to states and communities of various sizes and varying ranges of financial and technical resources. This how-to series is not intended to be the last word on any of the subject matter covered; rather, it is meant to be an easy to understand guide for the field practitioner. In practice, these guides may be supplemented with more extensive technical data and the use of experts if possible. The how-to guides cover the following topics: Getting started with the mitigation planning process including important considerations for how you can organize to develop a plan; Identifying hazards and assessing losses to your community and state; Setting mitigation priorities and goals for your community; Evaluating potential mitigation measures through the use of benefit-cost analysis and other techniques; Creating a mitigation plan and implementation strategy; Implementing the mitigation plan including project funding and revising the plan periodically as changes in the community occur; and Incorporating special circumstances in hazard mitigation planning for historic structures, among other topics. Risk assessment answers the fundamental question that fuels the natural hazard mitigation planning process: "What would happen if a natural hazard event occurred in your community or state?" Risk assessment is the process of measuring the potential loss of life, personal injury, economic injury, and property damage resulting from natural hazards by assessing the vulnerability of people, buildings, and infrastructure to natural hazards. Risk assessment provides the foundation for the rest of the mitigation planning process. The risk assessment process focuses your attention on areas most in need by evaluating which populations and facilities are most vulnerable to natural hazards and to what extent injuries and damages may occur. It tells you: The hazards to which your state or community is susceptible; What these hazards can do to physical, social, and economic assets; Which areas are most vulnerable to damage from these hazards; and The resulting cost of damages or costs avoided through future mitigation projects. In addition to benefiting mitigation planning, risk assessment information also allows emergency management personnel to establish early response priorities by identifying potential hazards and vulnerable assets. The steps in this how-to guide describe some methods you may use to develop this information. Subsequent guides assist you in determining priorities for mitigation and in deciding which assets in your community or state should be protected.
Download or read book Understanding Your Risks written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Your Risks written by and published by . This book was released on 2001 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing the Mitigation Plan Identifying Mitigation Actions and Implementation Strategies State and Local Mitigation Planning How To Guide FEMA 386 3 April 2003 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Emergency Management Agency (FEMA) has developed this series of mitigation planning “how-to” guides to assist states, tribes, and communities in enhancing their hazard mitigation planning capabilities. These guides are designed to provide the type of information states, tribes, and communities need to initiate and maintain a planning process that will result in safer and more disaster-resistant communities. These guides are applicable to states, tribes, and communities of various sizes and varying ranges of financial and technical resources. The how-to guides cover the following topics: Getting started with the mitigation planning process, including important considerations for how you can organize your efforts to develop an effective mitigation plan (FEMA 386-1); Identifying hazards and assessing losses to your community, tribe, or state (FEMA 386-2); Setting mitigation priorities and goals for your community, tribe, or state and writing the plan (FEMA 386-3); Implementing the mitigation plan, including project funding and maintaining a dynamic plan that changes to meet new developments (FEMA 386-4); Evaluating and prioritizing potential mitigation actions through the use of benefit-cost analysis and other techniques (FEMA 386-5); Incorporating special considerations into hazard mitigation planning for historic structures and cultural resources (FEMA 386-6); Incorporating mitigation considerations for manmade hazards into hazard mitigation planning (FEMA 386-7); Using multi-jurisdictional approaches to mitigation planning (FEMA 386-8); and Finding and securing technical and financial resources for mitigation planning (FEMA 386-9). This third guide in the state and local mitigation planning how-to series is about developing your community's mitigation strategy and documenting the planning process. It builds on the resources and organizational framework discussed in Getting Started: Building Support for Mitigation Planning (FEMA 386-1) and the results of the loss estimation conducted according to Understanding Your Risks: Identifying Hazards and Estimating Losses (FEMA 386-2). This guide provides you and your planning team with the tools necessary to develop mitigation goals and objectives, identify and prioritize mitigation actions, formulate an implementation strategy, and assemble the planning document.
Download or read book State and Local Mitigation Planning written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State and Local Mitigation Planning written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bringing the Plan to Life Implementing the Hazard Mitigation Plan State and Local Mitigation Planning How To Guide FEMA 386 4 August 2003 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Emergency Management Agency (FEMA) has developed this series of mitigation planning “how-to” guides to assist states, tribes, and communities in enhancing their hazard mitigation planning capabilities. These guides are designed to provide the type of information states, tribes, and communities need to initiate and maintain a planning process that will result in safer and more disaster-resistant communities. These guides are applicable to states, tribes, and communities of various sizes and varying ranges of financial and technical resources. The how-to guides cover the following topics: Getting started with the mitigation planning process, including important considerations for how you can organize your efforts to develop an effective mitigation plan (FEMA 386-1); Identifying hazards and assessing losses to your community, tribe, or state (FEMA 386-2); Setting mitigation priorities and goals for your community, tribe, or state and writing the plan (FEMA 386-3); Implementing the mitigation plan, including project funding and maintaining a dynamic plan that changes to meet new developments (FEMA 386-4); Evaluating and prioritizing potential mitigation actions through the use of benefit-cost analysis and other techniques (FEMA 386-5); Incorporating special considerations into hazard mitigation planning for historic structures and cultural resources (FEMA 386-6); Incorporating mitigation considerations for manmade hazards into hazard mitigation planning (FEMA 386-7); Using multi-jurisdictional approaches to mitigation planning (FEMA 386-8); and Finding and securing technical and financial resources for mitigation planning (FEMA 386-9). This guide will address the following questions: 1. How can we make sure the plan is officially recognized? Proof of formal adoption is required under DMA 2000 regulations. Getting the plan adopted ensures the support and approval of the governing authority in your jurisdiction. 2. What is the most effective mechanism to implement each recommendation? What resources are available? How can we keep the public informed and actively involved now that initiatives are underway? Your mitigation strategy probably contains various short- and long-term recommendations. The actual sources of funding, staff time, and staffing needs may change before project implementation gets underway. The planning team always must be on the lookout for alternative sources of funding, new opportunities, and new partnerships through which to carry out the recommendations. Determining who will bear responsibility for implementing planned actions is key to getting the implementation phase off to a successful start. 3. How will we know if our mitigation strategy is working? Monitoring and evaluating the outcomes of the mitigation actions are essential to knowing whether to stay the course or change it. The successes and limitations of your efforts should be documented as part of the evaluation process. Celebrating successes and keeping citizens actively involved and informed of the progress of the hazard mitigation initiatives, are just as important in the adoption, implementation, and revision phases as in any other phase. Keeping everyone up to date on progress also will help sustain support for mitigation as a local, tribal, or state priority. 4. When should we reexamine the plan? The community and its assets are constantly changing, requiring the mitigation plan to be updated periodically. While DMA 2000 regulations require a formal review and revision of the community plan once every five years for local jurisdictions and every three years for states, the planning team should reevaluate its implementation strategy as new opportunities, unforeseen challenges, and disasters arise. As mitigation issues are resolved, the plan should be reexamined to determine whether there is a need to reprioritize, add, or reconfigure actions in light of what has been accomplished.
Download or read book Using Benefit Cost Review in Mitigation Planning State and Local Mitigation Planning How To Guide Number Five FEMA 386 5 May 2007 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Disaster Mitigation Act of 2000 (DMA 2000) provides an opportunity for States, Tribal governments, and local jurisdictions to significantly reduce their vulnerability to natural hazards. It also allows them to streamline the receipt and use of Federal disaster assistance through pre-disaster hazard mitigation planning. DMA 2000 places new emphasis on State, Tribal, and local mitigation planning by requiring these entities to develop and submit mitigation plans as a condition of receiving various types of pre- and post-disaster assistance (such as the Pre-Disaster Mitigation [PDM] program and the Hazard Mitigation Grant Program [HMGP]) under the Stafford Act. On February 26, 2002, the Department of Homeland Security's Federal Emergency Management Agency (FEMA) published an Interim Final Rule (the Rule) to implement the mitigation planning requirements of DMA 2000. The Rule outlines the requirements for State, Tribal and local mitigation plans. FEMA has developed a series of guides, called the Mitigation Planning “How-To” Guides, to provide State, Tribal, and local governments with easy-to-understand information needed to initiate and maintain a hazard mitigation planning process and meet the requirements of the Rule. The first four How-To Guides are known as the “core four” guides. They provide the basic instructions for preparing a natural hazard mitigation plan. They are: Getting Started: Building Support for Mitigation Planning (FEMA 386-1); Understanding Your Risks: Identifying Hazards and Estimating Losses (FEMA 386-2); Developing the Mitigation Plan: Identifying Mitigation Actions and Implementation Strategies (FEMA 386-3); Bringing the Plan to Life: Implementing the Hazard Mitigation Plan (FEMA 386-4); This How-To Guide, Using Benefit-Cost Review in Mitigation Planning (FEMA 386-5), supplements FEMA 386-3 and focuses on guidance for using Benefit-Cost Review when prioritizing mitigation actions in a hazard mitigation plan. The purpose of a mitigation plan is to reduce the community's vulnerability to hazards. After assessing its risks, a community may consider many mitigation options. However, due to monetary as well as other limitations, it is often impossible to implement all mitigation actions. Hence, the Planning Team needs to select the most cost-effective actions for implementation first, not only to use resources efficiently, but to make a realistic start toward mitigating risks. The Rule supports the principle of cost-effectiveness by requiring hazard mitigation plans to have an action plan that includes a prioritization process that demonstrates a special emphasis on maximization of benefits over costs. The requirement states: The mitigation strategy section shall include] an action plan describing how the actions identified in section (c)(3)(ii) will be prioritized, implemented, and administered by the local jurisdiction. Prioritization shall include a special emphasis on the extent to which benefits are maximized according to a cost benefit review of the proposed projects and their associated costs. [§201.6(c)(3)(iii)] The purpose of this guide is to help local jurisdictions understand how to apply the concepts of Benefit-Cost Review to the prioritization of mitigation actions, and thereby meet the requirement of the Rule.
Download or read book Understanding Your Risks written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrating Manmade Hazards Into Mitigation Planning State and Local Mitigation Planning How To Guide FEMA 386 7 Version 2 0 September 2003 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Emergency Management Agency (FEMA) has developed this series of mitigation planning “how-to” guides to assist states, communities, and tribes in enhancing their hazard mitigation planning capabilities. These guides are designed to provide the type of information state and local governments need to initiate and maintain a planning process that will result in safer communities. These guides are applicable to states and communities of various sizes and varying ranges of financial and technical resources. This how-to series is not intended to be the last word on any of the subject matter covered; rather, it is meant to provide clear guidance for the field practitioner. In practice, these guides may be supplemented with more extensive technical resources and the use of experts when necessary. The series consists of four guides covering the core aspects of the planning process, and additional guides addressing special topics in hazard mitigation. The “core four” guides cover: Getting started with the mitigation planning process, including important considerations for how you can organize your efforts to develop an effective mitigation plan (FEMA 386-1); Identifying hazards and assessing losses to your community or state (FEMA 386-2); Setting mitigation priorities and goals for your community or state and writing the plan (FEMA 386-3); and Implementing the mitigation plan, including project funding and maintaining a dynamic plan that changes to meet new developments (FEMA 386-4). Special topics covered include: Evaluating potential mitigation actions through the use of benefit-cost analysis and other techniques (FEMA 386-5); Incorporating special considerations into hazard mitigation planning for historic properties and cultural resources (FEMA 386-6); Incorporating mitigation considerations for manmade hazards into hazard mitigation planning, the topic of this how-to guide (FEMA 386-7); Using multi-jurisdictional approaches to mitigation planning (FEMA 386-8); and Finding and securing technical and financial resources for mitigation planning (FEMA 386-9). Disasters are events that can cause loss of life and property, environmental damage, and disruption of governmental, social, and economic activities. They occur when hazards impact human settlements and the built environment. Throughout the Cold War, the focus of emergency management planning was on responding to and recovering from nuclear attack by foreign enemies. During the 1990s, this emphasis shifted to address natural disasters such as hurricanes, earthquakes, tornadoes, and floods. Yet again, the need to incorporate new threats into emergency management planning—this time, manmade hazards such as terrorism and technological disasters—has become all too apparent, as demonstrated by the September 11, 2001 attacks on New York City and Washington, DC and the July 2001 hazardous material train derailment and fire in Baltimore, Maryland. Additionally, the 2001 anthrax attacks, the 1996 bombing at the summer Olympics in Atlanta, the 1995 destruction of the Murrah Federal Building in Oklahoma City, the 1993 World Trade Center bombing, and scores of smaller-scale incidents and accidents reinforce the need for communities to reduce their vulnerability to future terrorist acts and technological disasters.
Download or read book Getting Started Building Support for Mitigation Planning State and Local Mitigation How To Guide FEMA 386 1 September 2002 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Emergency Management Agency (FEMA) has developed this series of mitigation planning "how-to" guides to assist states, communities, and tribes in enhancing their hazard mitigation planning capabilities. These guides are designed to provide the type of information state and local governments need to initiate and maintain a planning process that will result in safer communities. These guides are applicable to states and communities of various sizes and varying ranges of financial and technical resources. This how-to series is not intended to be the last word on any of the subject matter covered; rather, it is meant to provide easy to understand guidance for the field practitioner. In practice, these guides may be supplemented with more extensive technical data and the use of experts when necessary. The how-to guides cover the following topics: Getting started with the mitigation planning process, including important considerations for how you can organize your efforts to develop an effective mitigation plan (FEMA 386-1); Identifying hazards and assessing losses to your community or state (FEMA 386-2); Setting mitigation priorities and goals for your community or state and writing the plan (FEMA 386-3); Implementing the mitigation plan, including project funding and maintaining a dynamic plan that changes to meet new developments (FEMA 386-4); Evaluating potential mitigation measures through the use of benefit-cost analysis and other techniques (FEMA 386-5); Incorporating special considerations into hazard mitigation planning for historic structures and cultural resources (FEMA 386-6); Incorporating considerations for human-caused hazards into hazard mitigation planning (FEMA 386-7); Using multi-jurisdictional approaches to mitigation planning (FEMA 386-8); and Finding and securing technical and financial resources for mitigation planning (FEMA 386-9). This first guide in the State and Local Mitigation Planning How-to series discusses the activities and issues involved in initiating a hazard mitigation planning process. The topics covered here are presented within the context of the beginning phase of the mitigation planning process, although many of these activities will continue more or less behind the scenes throughout the process. Therefore, the efforts you put into identifying and organizing your resources early on will pay dividends later as you progress through some of the more challenging tasks of mitigation planning. This how-to guide thus covers not only this first phase of the planning process, but also provides snapshots of later phases. You will then be able to begin the planning process knowing ahead of time what types of resources you may need to call upon in the future. Lastly, but perhaps most importantly, elected officials, community staff, citizens, and businesses will benefit from the knowledge, organization, positive attitude, and energy that you and your team demonstrate.
Download or read book Multi Jurisdictional Mitigation Planning State and Local Mitigation Planning How To Guide Number Eight FEMA 386 8 August 2006 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Homeland Security's Federal Emergency Management Agency (FEMA) has developed a series of “how-to” guides for the purpose of assisting Tribes, States, and local governments in developing effective hazard mitigation planning processes. The material presented in these guides is intended to address the needs of both large and small communities with varying degrees of technical expertise and financial resources. The topic area for this guide is “Multi-Jurisdictional Approaches to Hazard Mitigation Planning” (FEMA 386-8). This guide provides suggestions to local governments in preparing multi-jurisdictional hazard mitigation plans that meet the DMA 2000 planning requirements. Other guides that have been developed by FEMA as part of the “how-to” series include: Getting started with the mitigation planning process, including important considerations for how you can organize your efforts to develop an effective mitigation plan (FEMA 386-1); Identifying hazards and assessing losses to your community, State, or Tribe (FEMA 386-2); Setting mitigation priorities and goals for your community, State, or Tribe and writing the plan (FEMA 386-3); Implementing the mitigation plan, including project funding and maintaining a dynamic plan that changes to meet new developments (FEMA 386-4); Evaluating potential mitigation actions through the use of benefit-cost review (FEMA 386-5) (to be published); Incorporating special considerations into hazard mitigation planning for historic properties and cultural resources, the topic of this how-to guide (FEMA 386-6); Incorporating mitigation considerations for manmade hazards into hazard mitigation planning (FEMA 386-7); and Finding and securing technical and financial resources for mitigation planning (FEMA 386-9). The first four guides are commonly referred to as the “core four” as they provide a broad overview of the core elements associated with hazard mitigation planning. This and the other guides are supplementary “how-to” guides that are to be used in conjunction with the “core four.” Disaster Mitigation Act of 2000 (DMA 2000) DMA 2000 provides an opportunity for States, Tribal Governments, and local jurisdictions to significantly reduce their vulnerability to natural hazards. It also allows them to streamline their access to and use of Federal disaster assistance, through pre-disaster hazard mitigation planning. DMA 2000 places new emphasis on State, Tribal, and local mitigation planning by requiring these entities to develop and submit mitigation plans as a condition of receiving various types of pre- and post-disaster assistance (such as the Pre-Disaster Mitigation Program [PDM] and the Hazard Mitigation Grant Program [HMGP]) under the Stafford Act. On February 26, 2002, FEMA published under Title 44 Part 201 of the Code of Federal Regulations (CFR) an Interim Rule (the Rule) to implement the mitigation planning requirements of DMA 2000. The Rule outlines the requirements for both State and local mitigation plans. FEMA has prepared a document, Multi-Hazard Mitigation Planning Guidance under the Disaster Mitigation Act of 2000, that explains the requirements of the Rule with the help of sample plan excerpts and discussion.
Download or read book State and Local Mitigation Planning How to Guides August 2001 written by and published by . This book was released on 2003 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Your Risks written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrating Historic Property and Cultural Resource Considerations Into Hazard Mitigation Planning State and Local Mitigation Planning How To Guide FEMA 386 6 May 2005 written by U. s. Department of Homeland Security and published by Createspace Independent Pub. This book was released on 2013-02-09 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Emergency Management Agency (FEMA) has developed a series of mitigation planning “how-to” guides for the purpose of assisting Tribes, States, and local governments in developing effective hazard mitigation planning processes. The material presented in these guides is intended to address the needs of both large and small communities with varying degrees of technical expertise and financial reserves. The topic area for this guide is “Integrating Historic Property and Cultural Resource Considerations into Hazard Mitigation Planning.” Other guides that have been developed by FEMA as part of the “how-to” series include: Getting started with the mitigation planning process, including important considerations for how you can organize your efforts to develop an effective mitigation plan (FEMA 386-1); Identifying hazards and assessing losses to your community, State, or Tribe (FEMA 386-2); Setting mitigation priorities and goals for your community, State, or Tribe and writing the plan (FEMA 386-3); and Implementing the mitigation plan, including project funding and maintaining a dynamic plan that changes to meet new developments (FEMA 386-4). These four guides are commonly referred to as the “core four” as they provide a broad overview of the core elements associated with hazard mitigation planning. In addition to these “core four,” FEMA has developed a series of supplementary “how-to” guides that are to be used in conjunction with the “core four” and address the following special topic areas: Evaluating potential mitigation actions through the use of benefit-cost review (FEMA 386-5); Incorporating special considerations into hazard mitigation planning for historic properties and cultural resources, the topic of this how-to guide (FEMA 386-6); Incorporating mitigation considerations for manmade hazards into hazard mitigation planning (FEMA 386-7); Using multi-jurisdictional approaches to mitigation planning (FEMA 386-8); and Finding and securing technical and financial resources for mitigation planning (FEMA 386-9). This guide is designed for all practitioners involved in creating a hazard mitigation plan (e.g., planners and emergency managers). Why should planners and emergency managers consider historic properties and cultural resources? Because after a disaster, these resources' special status as designated landmarks may complicate recovery efforts. However, these resources may also be assets that can help in creating mitigation plans with multiple community benefits. This guide will be of value to citizens who love their communities and want to protect their historic and cultural assets. The guide will outline specific steps for how communities can harness their knowledge, talent, and energy to create a secure future for historic resources.
Download or read book Understanding Your Risks written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Floodplain Management Bulletin Historic Structures written by and published by FEMA. This book was released on with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
